On Thu, Jul 08, 2021 at 02:18:26PM -0700, José Roberto de Souza wrote:
> Alderlake-P have different values for MBUS DBOX A credits depending
> if MBUS join is enabled or not.
>
> BSpec: 50343
> BSpec: 54369
> Cc: Matt Atwood <matthew.s.atw...@intel.com>
> Signed-off-by: José Roberto de Souza <jose.so...@intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_display.c | 16 ++++++++++++----
> 1 file changed, 12 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c
> b/drivers/gpu/drm/i915/display/intel_display.c
> index 65ddb6ca16e67..fe380896eb99e 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -3400,13 +3400,17 @@ static void glk_pipe_scaler_clock_gating_wa(struct
> drm_i915_private *dev_priv,
> intel_de_write(dev_priv, CLKGATE_DIS_PSL(pipe), val);
> }
>
> -static void icl_pipe_mbus_enable(struct intel_crtc *crtc)
> +static void icl_pipe_mbus_enable(struct intel_crtc *crtc, bool joined_mbus)
> {
> struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
> enum pipe pipe = crtc->pipe;
> u32 val;
>
> - val = MBUS_DBOX_A_CREDIT(2);
> + /* Wa_22010947358:adl-p */
> + if (IS_ALDERLAKE_P(dev_priv))
> + val = joined_mbus ? MBUS_DBOX_A_CREDIT(6) :
> MBUS_DBOX_A_CREDIT(4);
> + else
> + val = MBUS_DBOX_A_CREDIT(2);
If we're in single-pipe / joined-mbus mode, then we'll program the
credits to 6. If we later turn on another pipe, reallocate the DDB, and
turn off joined-mbus mode, we'll set that other pipe's credits to 4
during the sequence of hsw_crtc_enable() -> icl_pipe_mbus_enable(). But
don't we also need to go back re-program the credits down to 4 on the
first pipe too (which is already enabled and won't be re-calling
hsw_crtc_enable())?
I might be missing something; it's been a while since I really looked at
any of the dbuf stuff...
Matt
>
> if (DISPLAY_VER(dev_priv) >= 12) {
> val |= MBUS_DBOX_BW_CREDIT(2);
> @@ -3561,8 +3565,12 @@ static void hsw_crtc_enable(struct intel_atomic_state
> *state,
> if (dev_priv->display.initial_watermarks)
> dev_priv->display.initial_watermarks(state, crtc);
>
> - if (DISPLAY_VER(dev_priv) >= 11)
> - icl_pipe_mbus_enable(crtc);
> + if (DISPLAY_VER(dev_priv) >= 11) {
> + const struct intel_dbuf_state *dbuf_state =
> + intel_atomic_get_new_dbuf_state(state);
> +
> + icl_pipe_mbus_enable(crtc, dbuf_state->joined_mbus);
> + }
>
> if (new_crtc_state->bigjoiner_slave)
> intel_crtc_vblank_on(new_crtc_state);
> --
> 2.32.0
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Matt Roper
Graphics Software Engineer
VTT-OSGC Platform Enablement
Intel Corporation
(916) 356-2795
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
