On Wed, Feb 17, 2021 at 02:55:19PM +0800, Lee Shawn C wrote:
> According to Bspec #20124, max link rate table for DP was updated
> at BDB version 230. Max link rate can support upto UHBR.
>
> After migrate to BDB v230, the definition for LBR, HBR2 and HBR3
> were changed. For backward compatibility. If BDB version was
> from 216 to 229. Driver have to follow original rule to configure
> DP max link rate value from VBT.
>
> v2: split the mapping table to two for old and new BDB definition.
>
> Cc: Ville Syrjala <ville.syrj...@linux.intel.com>
> Cc: Imre Deak <imre.d...@intel.com>
> Cc: Jani Nikula <jani.nik...@linux.intel.com>
> Cc: Cooper Chiou <cooper.ch...@intel.com>
> Cc: William Tseng <william.ts...@intel.com>
> Signed-off-by: Lee Shawn C <shawn.c....@intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_bios.c | 72 +++++++++++++++----
> drivers/gpu/drm/i915/display/intel_vbt_defs.h | 23 ++++--
> 2 files changed, 74 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_bios.c
> b/drivers/gpu/drm/i915/display/intel_bios.c
> index 7902d4c2673e..a094c966f37f 100644
> --- a/drivers/gpu/drm/i915/display/intel_bios.c
> +++ b/drivers/gpu/drm/i915/display/intel_bios.c
> @@ -1759,6 +1759,58 @@ static enum port dvo_port_to_port(struct
> drm_i915_private *dev_priv,
> dvo_port);
> }
>
> +static void parse_bdb_230_dp_max_link_rate(const struct child_device_config
> *child,
> + struct ddi_vbt_port_info *info)
> +{
> + switch (child->dp_max_link_rate) {
> + case BDB_230_VBT_DP_MAX_LINK_RATE_UHBR20:
> + info->dp_max_link_rate = 2000000;
> + break;
> + case BDB_230_VBT_DP_MAX_LINK_RATE_UHBR13P5:
> + info->dp_max_link_rate = 1350000;
> + break;
> + case BDB_230_VBT_DP_MAX_LINK_RATE_UHBR10:
> + info->dp_max_link_rate = 1000000;
> + break;
> + case BDB_230_VBT_DP_MAX_LINK_RATE_HBR3:
> + info->dp_max_link_rate = 810000;
> + break;
> + case BDB_230_VBT_DP_MAX_LINK_RATE_HBR2:
> + info->dp_max_link_rate = 540000;
> + break;
> + case BDB_230_VBT_DP_MAX_LINK_RATE_HBR:
> + info->dp_max_link_rate = 270000;
> + break;
> + case BDB_230_VBT_DP_MAX_LINK_RATE_LBR:
> + info->dp_max_link_rate = 162000;
> + break;
> + case BDB_230_VBT_DP_MAX_LINK_RATE_DEF:
> + default:
> + info->dp_max_link_rate = 0;
> + break;
> + }
> +}
> +
> +static void parse_bdb_216_dp_max_link_rate(const struct child_device_config
> *child,
> + struct ddi_vbt_port_info *info)
> +{
> + switch (child->dp_max_link_rate) {
> + default:
> + case BDB_216_VBT_DP_MAX_LINK_RATE_HBR3:
> + info->dp_max_link_rate = 810000;
> + break;
> + case BDB_216_VBT_DP_MAX_LINK_RATE_HBR2:
> + info->dp_max_link_rate = 540000;
> + break;
> + case BDB_216_VBT_DP_MAX_LINK_RATE_HBR:
> + info->dp_max_link_rate = 270000;
> + break;
> + case BDB_216_VBT_DP_MAX_LINK_RATE_LBR:
> + info->dp_max_link_rate = 162000;
> + break;
> + }
> +}
Looks pretty good. One minor nit is that I would prefer these
to be pure functions. Ie. they should just directly return
the link rate instead of assigning it anywhere.
Then we can just do:
if (bdb_version >= 230)
info->dp_max_link_rate = parse_bdb_230_dp_max_link_rate(child)
else
info->dp_max_link_rate = parse_bdb_216_dp_max_link_rate(child)
> +
> static void parse_ddi_port(struct drm_i915_private *dev_priv,
> struct display_device_data *devdata,
> u8 bdb_version)
> @@ -1884,21 +1936,11 @@ static void parse_ddi_port(struct drm_i915_private
> *dev_priv,
>
> /* DP max link rate for CNL+ */
> if (bdb_version >= 216) {
> - switch (child->dp_max_link_rate) {
> - default:
> - case VBT_DP_MAX_LINK_RATE_HBR3:
> - info->dp_max_link_rate = 810000;
> - break;
> - case VBT_DP_MAX_LINK_RATE_HBR2:
> - info->dp_max_link_rate = 540000;
> - break;
> - case VBT_DP_MAX_LINK_RATE_HBR:
> - info->dp_max_link_rate = 270000;
> - break;
> - case VBT_DP_MAX_LINK_RATE_LBR:
> - info->dp_max_link_rate = 162000;
> - break;
> - }
> + if (bdb_version >= 230)
> + parse_bdb_230_dp_max_link_rate(child, info);
> + else
> + parse_bdb_216_dp_max_link_rate(child, info);
> +
> drm_dbg_kms(&dev_priv->drm,
> "Port %c VBT DP max link rate: %d\n",
> port_name(port), info->dp_max_link_rate);
> diff --git a/drivers/gpu/drm/i915/display/intel_vbt_defs.h
> b/drivers/gpu/drm/i915/display/intel_vbt_defs.h
> index 6d10fa037751..0d80b04b34be 100644
> --- a/drivers/gpu/drm/i915/display/intel_vbt_defs.h
> +++ b/drivers/gpu/drm/i915/display/intel_vbt_defs.h
> @@ -343,10 +343,21 @@ enum vbt_gmbus_ddi {
> #define DP_AUX_H 0x80
> #define DP_AUX_I 0x90
>
> -#define VBT_DP_MAX_LINK_RATE_HBR3 0
> -#define VBT_DP_MAX_LINK_RATE_HBR2 1
> -#define VBT_DP_MAX_LINK_RATE_HBR 2
> -#define VBT_DP_MAX_LINK_RATE_LBR 3
> +/* DP max link rate 216+ */
> +#define BDB_216_VBT_DP_MAX_LINK_RATE_HBR3 0
> +#define BDB_216_VBT_DP_MAX_LINK_RATE_HBR2 1
> +#define BDB_216_VBT_DP_MAX_LINK_RATE_HBR 2
> +#define BDB_216_VBT_DP_MAX_LINK_RATE_LBR 3
> +
> +/* DP max link rate 230+ */
> +#define BDB_230_VBT_DP_MAX_LINK_RATE_DEF 0
> +#define BDB_230_VBT_DP_MAX_LINK_RATE_LBR 1
> +#define BDB_230_VBT_DP_MAX_LINK_RATE_HBR 2
> +#define BDB_230_VBT_DP_MAX_LINK_RATE_HBR2 3
> +#define BDB_230_VBT_DP_MAX_LINK_RATE_HBR3 4
> +#define BDB_230_VBT_DP_MAX_LINK_RATE_UHBR10 5
> +#define BDB_230_VBT_DP_MAX_LINK_RATE_UHBR13P5 6
> +#define BDB_230_VBT_DP_MAX_LINK_RATE_UHBR20 7
>
> /*
> * The child device config, aka the display device data structure, provides a
> @@ -445,8 +456,8 @@ struct child_device_config {
> u16 dp_gpio_pin_num; /* 195 */
> u8 dp_iboost_level:4; /* 196 */
> u8 hdmi_iboost_level:4; /* 196 */
> - u8 dp_max_link_rate:2; /* 216 CNL+ */
> - u8 dp_max_link_rate_reserved:6; /* 216 */
> + u8 dp_max_link_rate:3; /* 230 CNL+ */
> + u8 dp_max_link_rate_reserved:5; /* 230 */
> } __packed;
>
> struct bdb_general_definitions {
> --
> 2.17.1
--
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
