On Fri, Aug 16, 2013 at 03:35:56PM +0300, Jani Nikula wrote:
> This does not include any panel specific sub-encoders yet.
>
> v2: Fix fixed mode handling (Daniel)
>
> Signed-off-by: Jani Nikula <jani.nik...@intel.com>
> Signed-off-by: Shobhit Kumar <shobhit.ku...@intel.com>
> ---
> drivers/gpu/drm/i915/Makefile | 1 +
> drivers/gpu/drm/i915/intel_drv.h | 1 +
> drivers/gpu/drm/i915/intel_dsi.c | 534
> ++++++++++++++++++++++++++++++++++++++
> 3 files changed, 536 insertions(+)
> create mode 100644 drivers/gpu/drm/i915/intel_dsi.c
>
> diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
> index 8bffd29..5864c5b 100644
> --- a/drivers/gpu/drm/i915/Makefile
> +++ b/drivers/gpu/drm/i915/Makefile
> @@ -21,6 +21,7 @@ i915-y := i915_drv.o i915_dma.o i915_irq.o \
> intel_display.o \
> intel_crt.o \
> intel_lvds.o \
> + intel_dsi.o \
> intel_dsi_cmd.o \
> intel_bios.o \
> intel_ddi.o \
> diff --git a/drivers/gpu/drm/i915/intel_drv.h
> b/drivers/gpu/drm/i915/intel_drv.h
> index a31abc6..cbe3df1 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -525,6 +525,7 @@ extern void intel_mark_fb_busy(struct drm_i915_gem_object
> *obj,
> struct intel_ring_buffer *ring);
> extern void intel_mark_idle(struct drm_device *dev);
> extern void intel_lvds_init(struct drm_device *dev);
> +extern bool intel_dsi_init(struct drm_device *dev);
> extern bool intel_is_dual_link_lvds(struct drm_device *dev);
> extern void intel_dp_init(struct drm_device *dev, int output_reg,
> enum port port);
> diff --git a/drivers/gpu/drm/i915/intel_dsi.c
> b/drivers/gpu/drm/i915/intel_dsi.c
> new file mode 100644
> index 0000000..d7eddbd
> --- /dev/null
> +++ b/drivers/gpu/drm/i915/intel_dsi.c
> @@ -0,0 +1,534 @@
> +/*
> + * Copyright © 2013 Intel Corporation
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a
> + * copy of this software and associated documentation files (the "Software"),
> + * to deal in the Software without restriction, including without limitation
> + * the rights to use, copy, modify, merge, publish, distribute, sublicense,
> + * and/or sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice (including the next
> + * paragraph) shall be included in all copies or substantial portions of the
> + * Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
> + * DEALINGS IN THE SOFTWARE.
> + *
> + * Author: Jani Nikula <jani.nik...@intel.com>
> + */
> +
> +#include <drm/drmP.h>
> +#include <drm/drm_crtc.h>
> +#include <drm/drm_edid.h>
> +#include <drm/i915_drm.h>
> +#include <linux/slab.h>
> +#include "i915_drv.h"
> +#include "intel_drv.h"
> +#include "intel_dsi.h"
> +#include "intel_dsi_cmd.h"
> +
> +/* the sub-encoders aka panel drivers */
> +static const struct intel_dsi_device intel_dsi_devices[] = {
> +};
> +
> +static struct intel_dsi *intel_attached_dsi(struct drm_connector *connector)
> +{
> + return container_of(intel_attached_encoder(connector),
> + struct intel_dsi, base);
> +}
> +
> +static inline bool is_vid_mode(struct intel_dsi *intel_dsi)
> +{
> + return intel_dsi->dev.type == INTEL_DSI_VIDEO_MODE;
> +}
> +
> +static inline bool is_cmd_mode(struct intel_dsi *intel_dsi)
> +{
> + return intel_dsi->dev.type == INTEL_DSI_COMMAND_MODE;
> +}
> +
> +static void intel_dsi_hot_plug(struct intel_encoder *encoder)
> +{
> + DRM_DEBUG_KMS("\n");
> +}
> +
> +static bool intel_dsi_compute_config(struct intel_encoder *encoder,
> + struct intel_crtc_config *config)
> +{
> + struct intel_dsi *intel_dsi = container_of(encoder, struct intel_dsi,
> + base);
> + struct intel_connector *intel_connector = intel_dsi->attached_connector;
> + struct drm_display_mode *fixed_mode = intel_connector->panel.fixed_mode;
> + struct drm_display_mode *adjusted_mode = &config->adjusted_mode;
> + struct drm_display_mode *mode = &config->requested_mode;
> +
> + DRM_DEBUG_KMS("\n");
> +
> + if (fixed_mode)
> + intel_fixed_panel_mode(fixed_mode, adjusted_mode);
> +
> + if (intel_dsi->dev.dev_ops->mode_fixup)
> + return intel_dsi->dev.dev_ops->mode_fixup(&intel_dsi->dev,
> + mode, adjusted_mode);
> +
> + return true;
> +}
> +
> +static void intel_dsi_pre_pll_enable(struct intel_encoder *encoder)
> +{
> + DRM_DEBUG_KMS("\n");
> +}
> +
> +static void intel_dsi_pre_enable(struct intel_encoder *encoder)
> +{
> + DRM_DEBUG_KMS("\n");
> +}
> +
> +static void intel_dsi_enable(struct intel_encoder *encoder)
> +{
> + struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
> + struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
> + struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
> + int pipe = intel_crtc->pipe;
> + u32 temp;
> +
> + DRM_DEBUG_KMS("\n");
> +
> + temp = I915_READ(MIPI_DEVICE_READY(pipe));
> + temp &= ~ULPS_STATE_MASK;
> + temp &= ~DEVICE_READY; /* XXX: assuming it's already !ready */
The spec seems to be telling me that we shouldn't frob w/ DEVICE_READY
when in ULPS.
So maybe we should not clear DEVICE_READY? Although it should not
be set when we get here, so I guess I'm worrying about nothing.
> + I915_WRITE(MIPI_DEVICE_READY(pipe), temp | ULPS_STATE_EXIT);
> + msleep(20); /* XXX */
> + I915_WRITE(MIPI_DEVICE_READY(pipe), temp);
> + msleep(20); /* XXX */
> + I915_WRITE(MIPI_DEVICE_READY(pipe), temp | DEVICE_READY);
> +
> + if (is_cmd_mode(intel_dsi))
> + I915_WRITE(MIPI_MAX_RETURN_PKT_SIZE(pipe), 8 * 4);
> +
> + /* Do this here, or let the slave encoder do it in ->dpms? */
> + if (is_vid_mode(intel_dsi)) {
> + dpi_send_cmd(intel_dsi, TURN_ON);
> + msleep(100);
> + }
> +
> + /* assert ip_tg_enable signal */
> + temp = I915_READ(MIPI_PORT_CTRL(pipe));
> + I915_WRITE(MIPI_PORT_CTRL(pipe), temp | DPI_ENABLE);
> + POSTING_READ(MIPI_PORT_CTRL(pipe));
Should be wrapped in is_vid_mode() check, no?
> +
> + intel_dsi->dev.dev_ops->enable(&intel_dsi->dev);
> +}
> +
> +static void intel_dsi_disable(struct intel_encoder *encoder)
> +{
> + struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
> + struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
> + struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
> + int pipe = intel_crtc->pipe;
> + u32 temp;
> +
> + DRM_DEBUG_KMS("\n");
> +
> + intel_dsi->dev.dev_ops->disable(&intel_dsi->dev);
> +
> + if (is_vid_mode(intel_dsi))
> + dpi_send_cmd(intel_dsi, SHUTDOWN);
> +
> + if (is_vid_mode(intel_dsi)) {
> + /* de-assert ip_tg_enable signal */
> + temp = I915_READ(MIPI_PORT_CTRL(pipe));
> + I915_WRITE(MIPI_PORT_CTRL(pipe), temp & ~DPI_ENABLE);
> + POSTING_READ(MIPI_PORT_CTRL(pipe));
> + }
> +
> + /* XXX: wait for fifos before ulps entry */
> +
> + temp = I915_READ(MIPI_DEVICE_READY(pipe));
> + temp &= ~ULPS_STATE_MASK;
Here too I suppose we might do this ULPS state clearing after we've
cleared DEVICE_READY. But again the device should not be in ULPS here,
so it may be a bit pointless.
> + temp &= ~DEVICE_READY;
> + I915_WRITE(MIPI_DEVICE_READY(pipe), temp);
> + msleep(5);
> + I915_WRITE(MIPI_DEVICE_READY(pipe), temp | ULPS_STATE_ENTER);
> +}
> +
> +static void intel_dsi_post_disable(struct intel_encoder *encoder)
> +{
> + DRM_DEBUG_KMS("\n");
> +}
> +
> +static bool intel_dsi_get_hw_state(struct intel_encoder *encoder,
> + enum pipe *pipe)
> +{
> + struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
> + struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
> +
> + DRM_DEBUG_KMS("\n");
> +
> + /* XXX: this is wrong */
> + if (intel_crtc) {
> + u32 val;
> +
> + *pipe = intel_crtc->pipe;
> +
> + /* XXX: only works for video mode */
> + val = I915_READ(MIPI_PORT_CTRL(*pipe));
> + return val & DPI_ENABLE;
> + }
> +
> + /* XXX: do we also need to call
> + * intel_dsi->dev.dev_ops->get_hw_state(&intel_dsi->dev);
> + */
> +
> + return false;
> +}
> +
> +static void intel_dsi_get_config(struct intel_encoder *encoder,
> + struct intel_crtc_config *pipe_config)
> +{
> + DRM_DEBUG_KMS("\n");
> +
> + /* XXX: read flags, set to adjusted_mode */
> +}
> +
> +static int intel_dsi_mode_valid(struct drm_connector *connector,
> + struct drm_display_mode *mode)
> +{
> + struct intel_connector *intel_connector = to_intel_connector(connector);
> + struct drm_display_mode *fixed_mode = intel_connector->panel.fixed_mode;
> + struct intel_dsi *intel_dsi = intel_attached_dsi(connector);
> +
> + DRM_DEBUG_KMS("\n");
> +
> + if (mode->flags & DRM_MODE_FLAG_DBLSCAN) {
> + DRM_DEBUG_KMS("MODE_NO_DBLESCAN\n");
> + return MODE_NO_DBLESCAN;
> + }
> +
> + if (fixed_mode) {
> + if (mode->hdisplay > fixed_mode->hdisplay)
> + return MODE_PANEL;
> + if (mode->vdisplay > fixed_mode->vdisplay)
> + return MODE_PANEL;
> + }
> +
> + return intel_dsi->dev.dev_ops->mode_valid(&intel_dsi->dev, mode);
> +}
> +
> +/* return pixels in terms of txbyteclkhs */
> +static u16 txbyteclkhs(u16 pixels, int bpp, int lane_count)
> +{
> + return DIV_ROUND_UP(DIV_ROUND_UP(pixels * bpp, 8), lane_count);
> +}
> +
> +static void set_dsi_timings(struct drm_encoder *encoder,
> + const struct drm_display_mode *mode)
> +{
> + struct drm_device *dev = encoder->dev;
> + struct drm_i915_private *dev_priv = dev->dev_private;
> + struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
> + struct intel_dsi *intel_dsi = enc_to_intel_dsi(encoder);
> + int pipe = intel_crtc->pipe;
> + unsigned int bpp = intel_crtc->config.pipe_bpp;
> + unsigned int lane_count = intel_dsi->lane_count;
> +
> + u16 hactive, hfp, hsync, hbp, vfp, vsync, vbp;
> +
> + hactive = mode->hdisplay;
> + hfp = mode->hsync_start - mode->hdisplay;
> + hsync = mode->hsync_end - mode->hsync_start;
> + hbp = mode->htotal - mode->hsync_end;
> +
> + vfp = mode->vsync_start - mode->vdisplay;
> + vsync = mode->vsync_end - mode->vsync_start;
> + vbp = mode->vtotal - mode->vsync_end;
> +
> + /* horizontal values are in terms of high speed byte clock */
> + hactive = txbyteclkhs(hactive, bpp, lane_count);
> + hfp = txbyteclkhs(hfp, bpp, lane_count);
> + hsync = txbyteclkhs(hsync, bpp, lane_count);
> + hbp = txbyteclkhs(hbp, bpp, lane_count);
> +
> + I915_WRITE(MIPI_HACTIVE_AREA_COUNT(pipe), hactive);
> + I915_WRITE(MIPI_HFP_COUNT(pipe), hfp);
> +
> + /* meaningful for video mode non-burst sync pulse mode only, can be zero
> + * for non-burst sync events and burst modes */
> + I915_WRITE(MIPI_HSYNC_PADDING_COUNT(pipe), hsync);
> + I915_WRITE(MIPI_HBP_COUNT(pipe), hbp);
> +
> + /* vertical values are in terms of lines */
> + I915_WRITE(MIPI_VFP_COUNT(pipe), vfp);
> + I915_WRITE(MIPI_VSYNC_PADDING_COUNT(pipe), vsync);
> + I915_WRITE(MIPI_VBP_COUNT(pipe), vbp);
> +}
> +
> +static void intel_dsi_mode_set(struct intel_encoder *intel_encoder)
> +{
> + struct drm_encoder *encoder = &intel_encoder->base;
> + struct drm_device *dev = encoder->dev;
> + struct drm_i915_private *dev_priv = dev->dev_private;
> + struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
> + struct intel_dsi *intel_dsi = enc_to_intel_dsi(encoder);
> + struct drm_display_mode *adjusted_mode =
> + &intel_crtc->config.adjusted_mode;
> + int pipe = intel_crtc->pipe;
> + unsigned int bpp = intel_crtc->config.pipe_bpp;
> + u32 val, tmp;
> +
> + DRM_DEBUG_KMS("pipe %d\n", pipe);
> +
> + /* escape clock divider, 20MHz, shared for A and C. device ready must be
> + * off when doing this! txclkesc? */
> + tmp = I915_READ(MIPI_CTRL(0));
> + tmp &= ~ESCAPE_CLOCK_DIVIDER_MASK;
> + I915_WRITE(MIPI_CTRL(0), tmp | ESCAPE_CLOCK_DIVIDER_1);
> +
> + /* read request priority is per pipe */
> + tmp = I915_READ(MIPI_CTRL(pipe));
> + tmp &= ~READ_REQUEST_PRIORITY_MASK;
> + I915_WRITE(MIPI_CTRL(pipe), tmp | READ_REQUEST_PRIORITY_HIGH);
> +
> + /* XXX: why here, why like this? handling in irq handler?! */
> + I915_WRITE(MIPI_INTR_STAT(pipe), 0xffffffff);
> + I915_WRITE(MIPI_INTR_EN(pipe), 0xffffffff);
> +
> + I915_WRITE(MIPI_DPHY_PARAM(pipe),
> + 0x3c << EXIT_ZERO_COUNT_SHIFT |
> + 0x1f << TRAIL_COUNT_SHIFT |
> + 0xc5 << CLK_ZERO_COUNT_SHIFT |
> + 0x1f << PREPARE_COUNT_SHIFT);
> +
> + I915_WRITE(MIPI_DPI_RESOLUTION(pipe),
> + adjusted_mode->vdisplay << VERTICAL_ADDRESS_SHIFT |
> + adjusted_mode->hdisplay << HORIZONTAL_ADDRESS_SHIFT);
> +
> + set_dsi_timings(encoder, adjusted_mode);
> +
> + val = intel_dsi->lane_count << DATA_LANES_PRG_REG_SHIFT;
> + if (is_cmd_mode(intel_dsi)) {
> + val |= intel_dsi->channel << CMD_MODE_CHANNEL_NUMBER_SHIFT;
> + val |= CMD_MODE_DATA_WIDTH_8_BIT; /* XXX */
> + } else {
> + val |= intel_dsi->channel << VID_MODE_CHANNEL_NUMBER_SHIFT;
> +
> + /* XXX: cross-check bpp vs. pixel format? */
> + val |= intel_dsi->pixel_format;
> + }
> + I915_WRITE(MIPI_DSI_FUNC_PRG(pipe), val);
> +
> + /* timeouts for recovery. one frame IIUC. if counter expires, EOT and
> + * stop state. */
> +
> + if (is_vid_mode(intel_dsi) &&
> + intel_dsi->video_mode_format == VIDEO_MODE_BURST) {
> + I915_WRITE(MIPI_HS_TX_TIMEOUT(pipe),
> + txbyteclkhs(adjusted_mode->htotal + 1, bpp,
> + intel_dsi->lane_count));
Should the +1 maybe be outside the txbyteclkhs()?
> + } else {
> + I915_WRITE(MIPI_HS_TX_TIMEOUT(pipe),
> + txbyteclkhs(adjusted_mode->vtotal *
> + adjusted_mode->htotal,
> + bpp, intel_dsi->lane_count));
+1 needed here too isn't it?
> + }
> + I915_WRITE(MIPI_LP_RX_TIMEOUT(pipe), 0xffff);
Hmm. Spec says this should be somewhere between 21 and
117+max_payload_bytes*16. If we take max_payload_bytes to be 512 based
on the generic data FIFO size, then we'd get 8309 as the absolute max
we will ever need.
> + I915_WRITE(MIPI_TURN_AROUND_TIMEOUT(pipe), 0x14);
> +
> + I915_WRITE(MIPI_DEVICE_RESET_TIMER(pipe), 0xffff);
These two are the max according to the spec. Seems OK.
> +
> + /* dphy stuff */
> +
> + /* in terms of low power clock */
> + I915_WRITE(MIPI_INIT_COUNT(pipe), 0x7d0);
Maybe add a note that the actual initialization period is 100 usec, so
people don't have to reverse compute it. Or maybe even add some
txclkesc variable/define and explicitly calculate this.
Maybe it would be clearer to write these timeout values in decimal,
though the spec seems to prefer hex in some cases.
> +
> + /* recovery disables */
> + I915_WRITE(MIPI_EOT_DISABLE(pipe), intel_dsi->eot_disable);
> +
> + /* in terms of txbyteclkhs. actual high to low switch +
> + * MIPI_STOP_STATE_STALL * MIPI_LP_BYTECLK.
> + *
> + * XXX: write MIPI_STOP_STATE_STALL?
> + */
> + I915_WRITE(MIPI_HIGH_LOW_SWITCH_COUNT(pipe), 0x46);
> +
> + /* XXX: low power clock equivalence in terms of byte clock. the number
> + * of byte clocks occupied in one low power clock. based on txbyteclkhs
> + * and txclkesc. txclkesc time / txbyteclk time * (105 +
> + * MIPI_STOP_STATE_STALL) / 105.???
> + */
> + I915_WRITE(MIPI_LP_BYTECLK(pipe), 4);
> +
> + /* the bw essential for transmitting 16 long packets containing 252
> + * bytes meant for dcs write memory command is programmed in this
> + * register in terms of byte clocks. based on dsi transfer rate and the
> + * number of lanes configured the time taken to transmit 16 long packets
> + * in a dsi stream varies. */
> + I915_WRITE(MIPI_DBI_BW_CTRL(pipe), 0x820);
> +
> + I915_WRITE(MIPI_CLK_LANE_SWITCH_TIME_CNT(pipe),
> + 0xa << LP_HS_SSW_CNT_SHIFT |
> + 0x14 << HS_LP_PWR_SW_CNT_SHIFT);
Hmm. Actualky calculating all this stuff might be nice. But I guess we
can leave that for later.
> +
> + if (is_vid_mode(intel_dsi))
> + I915_WRITE(MIPI_VIDEO_MODE_FORMAT(pipe),
> + intel_dsi->video_mode_format);
> +}
> +
> +static enum drm_connector_status
> +intel_dsi_detect(struct drm_connector *connector, bool force)
> +{
> + struct intel_dsi *intel_dsi = intel_attached_dsi(connector);
> + DRM_DEBUG_KMS("\n");
> + return intel_dsi->dev.dev_ops->detect(&intel_dsi->dev);
> +}
> +
> +static int intel_dsi_get_modes(struct drm_connector *connector)
> +{
> + struct intel_connector *intel_connector = to_intel_connector(connector);
> + struct drm_display_mode *mode;
> +
> + DRM_DEBUG_KMS("\n");
> +
> + if (!intel_connector->panel.fixed_mode) {
> + DRM_DEBUG_KMS("no fixed mode\n");
> + return 0;
> + }
> +
> + mode = drm_mode_duplicate(connector->dev,
> + intel_connector->panel.fixed_mode);
> + if (!mode) {
> + DRM_DEBUG_KMS("drm_mode_duplicate failed\n");
> + return 0;
> + }
> +
> + drm_mode_probed_add(connector, mode);
> + return 1;
> +}
> +
> +static void intel_dsi_destroy(struct drm_connector *connector)
> +{
> + struct intel_connector *intel_connector = to_intel_connector(connector);
> +
> + DRM_DEBUG_KMS("\n");
> + intel_panel_fini(&intel_connector->panel);
> + drm_sysfs_connector_remove(connector);
> + drm_connector_cleanup(connector);
> + kfree(connector);
> +}
> +
> +static const struct drm_encoder_funcs intel_dsi_funcs = {
> + .destroy = intel_encoder_destroy,
> +};
> +
> +static const struct drm_connector_helper_funcs
> intel_dsi_connector_helper_funcs = {
> + .get_modes = intel_dsi_get_modes,
> + .mode_valid = intel_dsi_mode_valid,
> + .best_encoder = intel_best_encoder,
> +};
> +
> +static const struct drm_connector_funcs intel_dsi_connector_funcs = {
> + .dpms = intel_connector_dpms,
> + .detect = intel_dsi_detect,
> + .destroy = intel_dsi_destroy,
> + .fill_modes = drm_helper_probe_single_connector_modes,
> +};
> +
> +bool intel_dsi_init(struct drm_device *dev)
> +{
> + struct intel_dsi *intel_dsi;
> + struct intel_encoder *intel_encoder;
> + struct drm_encoder *encoder;
> + struct intel_connector *intel_connector;
> + struct drm_connector *connector;
> + struct drm_display_mode *fixed_mode = NULL;
> + const struct intel_dsi_device *dsi;
> + unsigned int i;
> +
> + DRM_DEBUG_KMS("\n");
> +
> + intel_dsi = kzalloc(sizeof(*intel_dsi), GFP_KERNEL);
> + if (!intel_dsi)
> + return false;
> +
> + intel_connector = kzalloc(sizeof(*intel_connector), GFP_KERNEL);
> + if (!intel_connector) {
> + kfree(intel_dsi);
> + return false;
> + }
> +
> + intel_encoder = &intel_dsi->base;
> + encoder = &intel_encoder->base;
> + intel_dsi->attached_connector = intel_connector;
> +
> + connector = &intel_connector->base;
> +
> + drm_encoder_init(dev, encoder, &intel_dsi_funcs, DRM_MODE_ENCODER_DSI);
> +
> + /* XXX: very likely not all of these are needed */
> + intel_encoder->hot_plug = intel_dsi_hot_plug;
> + intel_encoder->compute_config = intel_dsi_compute_config;
> + intel_encoder->pre_pll_enable = intel_dsi_pre_pll_enable;
> + intel_encoder->pre_enable = intel_dsi_pre_enable;
> + intel_encoder->enable = intel_dsi_enable;
> + intel_encoder->mode_set = intel_dsi_mode_set;
> + intel_encoder->disable = intel_dsi_disable;
> + intel_encoder->post_disable = intel_dsi_post_disable;
> + intel_encoder->get_hw_state = intel_dsi_get_hw_state;
> + intel_encoder->get_config = intel_dsi_get_config;
> +
> + intel_connector->get_hw_state = intel_connector_get_hw_state;
> +
> + for (i = 0; i < ARRAY_SIZE(intel_dsi_devices); i++) {
> + dsi = &intel_dsi_devices[i];
> + intel_dsi->dev = *dsi;
> +
> + if (dsi->dev_ops->init(&intel_dsi->dev))
> + break;
> + }
> +
> + if (i == ARRAY_SIZE(intel_dsi_devices)) {
> + DRM_DEBUG_KMS("no device found\n");
> + goto err;
> + }
> +
> + intel_encoder->type = INTEL_OUTPUT_DSI;
> + intel_encoder->crtc_mask = (1 << 0); /* XXX */
Maybe just pass in "pipe" since we have DSI for both A and B. Although
I didn't look at the DSI PLL code yet, so I'm not sure we can actually
use both DSI outputs at the same time currently. I suppose both need
to be running at the same freq since we have only one PLL, and we have
to take care of the PLL sharing somewhere.
> +
> + intel_encoder->cloneable = false;
> + drm_connector_init(dev, connector, &intel_dsi_connector_funcs,
> + DRM_MODE_CONNECTOR_DSI);
> +
> + drm_connector_helper_add(connector, &intel_dsi_connector_helper_funcs);
> +
> + connector->display_info.subpixel_order = SubPixelHorizontalRGB; /*XXX*/
> + connector->interlace_allowed = false;
> + connector->doublescan_allowed = false;
> +
> + intel_connector_attach_encoder(intel_connector, intel_encoder);
> +
> + drm_sysfs_connector_add(connector);
> +
> + fixed_mode = dsi->dev_ops->get_modes(&intel_dsi->dev);
> + if (!fixed_mode) {
> + DRM_DEBUG_KMS("no fixed mode\n");
> + goto err;
> + }
> +
> + fixed_mode->type |= DRM_MODE_TYPE_PREFERRED;
> + intel_panel_init(&intel_connector->panel, fixed_mode);
> +
> + return true;
> +
> +err:
> + drm_encoder_cleanup(&intel_encoder->base);
> + kfree(intel_dsi);
> + kfree(intel_connector);
> +
> + return false;
> +}
> --
> 1.7.9.5
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
