From: Ville Syrjälä <ville.syrj...@linux.intel.com>
Extract the dbuf slice data_rate calculation into a small
helper. Should make it a bit easier to handle the different
color planes of planar formats correctly.
Signed-off-by: Ville Syrjälä <ville.syrj...@linux.intel.com>
---
drivers/gpu/drm/i915/display/intel_bw.c | 81 ++++++++++++++-----------
1 file changed, 44 insertions(+), 37 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_bw.c
b/drivers/gpu/drm/i915/display/intel_bw.c
index bd060404d249..f6de0b9bca90 100644
--- a/drivers/gpu/drm/i915/display/intel_bw.c
+++ b/drivers/gpu/drm/i915/display/intel_bw.c
@@ -428,6 +428,49 @@ intel_atomic_get_bw_state(struct intel_atomic_state *state)
return to_intel_bw_state(bw_state);
}
+static void skl_crtc_calc_dbuf_bw(struct intel_bw_state *bw_state,
+ const struct intel_crtc_state *crtc_state)
+{
+ struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
+ struct drm_i915_private *i915 = to_i915(crtc->base.dev);
+ struct intel_dbuf_bw *crtc_bw = &bw_state->dbuf_bw[crtc->pipe];
+ enum plane_id plane_id;
+
+ memset(&crtc_bw->used_bw, 0, sizeof(crtc_bw->used_bw));
+
+ if (!crtc_state->hw.active)
+ return;
+
+ for_each_plane_id_on_crtc(crtc, plane_id) {
+ const struct skl_ddb_entry *ddb_y =
+ &crtc_state->wm.skl.plane_ddb_y[plane_id];
+ const struct skl_ddb_entry *ddb_uv =
+ &crtc_state->wm.skl.plane_ddb_uv[plane_id];
+ unsigned int data_rate = crtc_state->data_rate[plane_id];
+ unsigned int dbuf_mask = 0;
+ int slice_id;
+
+ dbuf_mask |= skl_ddb_dbuf_slice_mask(i915, ddb_y);
+ dbuf_mask |= skl_ddb_dbuf_slice_mask(i915, ddb_uv);
+
+ /*
+ * FIXME: To calculate that more properly we probably
+ * need to split per plane data_rate into data_rate_y
+ * and data_rate_uv for multiplanar formats in order not
+ * to get accounted those twice if they happen to reside
+ * on different slices.
+ * However for pre-icl this would work anyway because
+ * we have only single slice and for icl+ uv plane has
+ * non-zero data rate.
+ * So in worst case those calculation are a bit
+ * pessimistic, which shouldn't pose any significant
+ * problem anyway.
+ */
+ for_each_dbuf_slice_in_mask(slice_id, dbuf_mask)
+ crtc_bw->used_bw[slice_id] += data_rate;
+ }
+}
+
int skl_bw_calc_min_cdclk(struct intel_atomic_state *state)
{
struct drm_i915_private *dev_priv = to_i915(state->base.dev);
@@ -441,49 +484,13 @@ int skl_bw_calc_min_cdclk(struct intel_atomic_state
*state)
int i;
for_each_new_intel_crtc_in_state(state, crtc, crtc_state, i) {
- enum plane_id plane_id;
- struct intel_dbuf_bw *crtc_bw;
-
new_bw_state = intel_atomic_get_bw_state(state);
if (IS_ERR(new_bw_state))
return PTR_ERR(new_bw_state);
old_bw_state = intel_atomic_get_old_bw_state(state);
- crtc_bw = &new_bw_state->dbuf_bw[crtc->pipe];
-
- memset(&crtc_bw->used_bw, 0, sizeof(crtc_bw->used_bw));
-
- if (!crtc_state->hw.active)
- continue;
-
- for_each_plane_id_on_crtc(crtc, plane_id) {
- const struct skl_ddb_entry *plane_alloc =
- &crtc_state->wm.skl.plane_ddb_y[plane_id];
- const struct skl_ddb_entry *uv_plane_alloc =
- &crtc_state->wm.skl.plane_ddb_uv[plane_id];
- unsigned int data_rate =
crtc_state->data_rate[plane_id];
- unsigned int dbuf_mask = 0;
-
- dbuf_mask |= skl_ddb_dbuf_slice_mask(dev_priv,
plane_alloc);
- dbuf_mask |= skl_ddb_dbuf_slice_mask(dev_priv,
uv_plane_alloc);
-
- /*
- * FIXME: To calculate that more properly we probably
- * need to to split per plane data_rate into data_rate_y
- * and data_rate_uv for multiplanar formats in order not
- * to get accounted those twice if they happen to reside
- * on different slices.
- * However for pre-icl this would work anyway because
- * we have only single slice and for icl+ uv plane has
- * non-zero data rate.
- * So in worst case those calculation are a bit
- * pessimistic, which shouldn't pose any significant
- * problem anyway.
- */
- for_each_dbuf_slice_in_mask(slice_id, dbuf_mask)
- crtc_bw->used_bw[slice_id] += data_rate;
- }
+ skl_crtc_calc_dbuf_bw(new_bw_state, crtc_state);
}
if (!old_bw_state)
--
2.26.2
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
