On Thu, 22 Oct 2020, Manasi Navare <manasi.d.nav...@intel.com> wrote:
> This forces a complete modeset if vrr drm crtc state goes
> from enabled to disabled and vice versa.
> This patch also computes vrr state variables from the mode timings
> and based on the vrr property set by userspace as well as hardware's
> vrr capability.
>
> v2:
> *Rebase
> v3:
> * Vmin = max (vtotal, vmin) (Manasi)
> v4:
> * set crtc_state->vrr.enable = 0 for disable request
>
> Cc: Ville Syrjälä <ville.syrj...@linux.intel.com>
> Cc: Jani Nikula <jani.nik...@linux.intel.com>
> Signed-off-by: Manasi Navare <manasi.d.nav...@intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_display.c | 7 +++-
> drivers/gpu/drm/i915/display/intel_dp.c | 1 +
> drivers/gpu/drm/i915/display/intel_vrr.c | 38 ++++++++++++++++++++
> drivers/gpu/drm/i915/display/intel_vrr.h | 2 ++
> 4 files changed, 47 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c
> b/drivers/gpu/drm/i915/display/intel_display.c
> index f41b6f8b5618..f70cc3b2a1a4 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -14213,6 +14213,10 @@ intel_pipe_config_compare(const struct
> intel_crtc_state *current_config,
>
> PIPE_CONF_CHECK_I(mst_master_transcoder);
>
> + PIPE_CONF_CHECK_BOOL(vrr.enable);
> + PIPE_CONF_CHECK_I(vrr.vtotalmin);
> + PIPE_CONF_CHECK_I(vrr.vtotalmax);
> +
> #undef PIPE_CONF_CHECK_X
> #undef PIPE_CONF_CHECK_I
> #undef PIPE_CONF_CHECK_BOOL
> @@ -15202,7 +15206,8 @@ static int intel_atomic_check(struct drm_device *dev,
>
> for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state,
> new_crtc_state, i) {
> - if (new_crtc_state->inherited != old_crtc_state->inherited)
> + if (new_crtc_state->inherited != old_crtc_state->inherited ||
> + new_crtc_state->uapi.vrr_enabled !=
> old_crtc_state->uapi.vrr_enabled)
Somehow this feels like a really specific check to add considering the
abstraction level of the function in general.
> new_crtc_state->uapi.mode_changed = true;
> }
>
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c
> b/drivers/gpu/drm/i915/display/intel_dp.c
> index 3794b8f35edc..3185c4ca523d 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -2752,6 +2752,7 @@ intel_dp_compute_config(struct intel_encoder *encoder,
> if (!HAS_DDI(dev_priv))
> intel_dp_set_clock(encoder, pipe_config);
>
> + intel_vrr_compute_config(intel_dp, pipe_config);
> intel_psr_compute_config(intel_dp, pipe_config);
> intel_dp_drrs_compute_config(intel_dp, pipe_config, output_bpp,
> constant_n);
> diff --git a/drivers/gpu/drm/i915/display/intel_vrr.c
> b/drivers/gpu/drm/i915/display/intel_vrr.c
> index 0c8a91fabb64..56114f535f94 100644
> --- a/drivers/gpu/drm/i915/display/intel_vrr.c
> +++ b/drivers/gpu/drm/i915/display/intel_vrr.c
> @@ -26,3 +26,41 @@ bool intel_is_vrr_capable(struct drm_connector *connector)
> info->monitor_range.max_vfreq - info->monitor_range.min_vfreq >
> 10;
> }
>
> +void
> +intel_vrr_compute_config(struct intel_dp *intel_dp,
> + struct intel_crtc_state *crtc_state)
> +{
> + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
> + struct intel_connector *intel_connector = intel_dp->attached_connector;
> + struct drm_connector *connector = &intel_connector->base;
> + struct drm_display_mode *adjusted_mode = &crtc_state->hw.adjusted_mode;
> + const struct drm_display_info *info = &connector->display_info;
> +
> + if (!intel_is_vrr_capable(connector))
> + return;
> +
> + if (!crtc_state->uapi.vrr_enabled) {
> + drm_dbg(&dev_priv->drm,
> + "VRR disable requested by Userspace\n");
drm_dbg_kms, though is this useful information? Quite a bit of log spam
I'd think.
> + crtc_state->vrr.enable = false;
> + return;
> + }
> +
> + crtc_state->vrr.enable = true;
> + crtc_state->vrr.vtotalmin =
> + max_t(u16, adjusted_mode->crtc_vtotal,
> + DIV_ROUND_CLOSEST(adjusted_mode->crtc_clock * 1000,
> + adjusted_mode->crtc_htotal *
> + info->monitor_range.max_vfreq));
> + crtc_state->vrr.vtotalmax =
> + max_t(u16, adjusted_mode->crtc_vtotal,
> + DIV_ROUND_UP(adjusted_mode->crtc_clock * 1000,
> + adjusted_mode->crtc_htotal *
> + info->monitor_range.min_vfreq));
> +
> + drm_dbg(&dev_priv->drm,
drm_dbg_kms
> + "VRR Config: Enable = %s Vtotal Min = %d Vtotal Max = %d\n",
> + yesno(crtc_state->vrr.enable), crtc_state->vrr.vtotalmin,
> + crtc_state->vrr.vtotalmax);
> +}
> +
> diff --git a/drivers/gpu/drm/i915/display/intel_vrr.h
> b/drivers/gpu/drm/i915/display/intel_vrr.h
> index 755746c7525c..1e6fe8fe92ec 100644
> --- a/drivers/gpu/drm/i915/display/intel_vrr.h
> +++ b/drivers/gpu/drm/i915/display/intel_vrr.h
> @@ -15,5 +15,7 @@ struct intel_encoder;
> struct intel_dp;
>
> bool intel_is_vrr_capable(struct drm_connector *connector);
> +void intel_vrr_compute_config(struct intel_dp *intel_dp,
> + struct intel_crtc_state *crtc_state);
>
> #endif /* __INTEL_VRR_H__ */
--
Jani Nikula, Intel Open Source Graphics Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
