On Wed, Oct 21, 2020 at 10:42:15PM -0700, Manasi Navare wrote:
> From: Maarten Lankhorst <maarten.lankho...@linux.intel.com>
>
> Small changes to intel_dp_mode_valid(), allow listing modes that
> can only be supported in the bigjoiner configuration, which is
> not supported yet.
>
> eDP does not support bigjoiner, so do not expose bigjoiner only
> modes on the eDP port.
>
> v9:
> * Restric Bigjoiner on PORT A (Ville)
> v8:
> * use source dotclock for max dotclock (Manasi)
> v7:
> * Add can_bigjoiner() helper (Ville)
> * Pass bigjoiner to plane_size validation (Ville)
> v6:
> * Rebase after dp_downstream mode valid changes (Manasi)
> v5:
> * Increase max plane width to support 8K with bigjoiner (Maarten)
> v4:
> * Rebase (Manasi)
>
> Changes since v1:
> - Disallow bigjoiner on eDP.
> Changes since v2:
> - Rename intel_dp_downstream_max_dotclock to intel_dp_max_dotclock,
> and split off the downstream and source checking to its own function.
> (Ville)
> v3:
> * Rebase (Manasi)
>
> Signed-off-by: Manasi Navare <manasi.d.nav...@intel.com>
> Signed-off-by: Maarten Lankhorst <maarten.lankho...@linux.intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_display.c | 5 +-
> drivers/gpu/drm/i915/display/intel_display.h | 3 +-
> drivers/gpu/drm/i915/display/intel_dp.c | 106 +++++++++++++++----
> drivers/gpu/drm/i915/display/intel_dp_mst.c | 2 +-
> drivers/gpu/drm/i915/display/intel_dsi.c | 2 +-
> drivers/gpu/drm/i915/display/intel_hdmi.c | 2 +-
> 6 files changed, 96 insertions(+), 24 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c
> b/drivers/gpu/drm/i915/display/intel_display.c
> index 9b4fcc734122..1c2d67ae361d 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -17751,7 +17751,8 @@ intel_mode_valid(struct drm_device *dev,
>
> enum drm_mode_status
> intel_mode_valid_max_plane_size(struct drm_i915_private *dev_priv,
> - const struct drm_display_mode *mode)
> + const struct drm_display_mode *mode,
> + bool bigjoiner)
> {
> int plane_width_max, plane_height_max;
>
> @@ -17768,7 +17769,7 @@ intel_mode_valid_max_plane_size(struct
> drm_i915_private *dev_priv,
> * too big for that.
> */
> if (INTEL_GEN(dev_priv) >= 11) {
> - plane_width_max = 5120;
> + plane_width_max = 5120 << bigjoiner;
> plane_height_max = 4320;
> } else {
> plane_width_max = 5120;
> diff --git a/drivers/gpu/drm/i915/display/intel_display.h
> b/drivers/gpu/drm/i915/display/intel_display.h
> index 1b946209e06b..4f8dee9dfb4d 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.h
> +++ b/drivers/gpu/drm/i915/display/intel_display.h
> @@ -497,7 +497,8 @@ u32 intel_plane_fb_max_stride(struct drm_i915_private
> *dev_priv,
> bool intel_plane_can_remap(const struct intel_plane_state *plane_state);
> enum drm_mode_status
> intel_mode_valid_max_plane_size(struct drm_i915_private *dev_priv,
> - const struct drm_display_mode *mode);
> + const struct drm_display_mode *mode,
> + bool bigjoiner);
> enum phy intel_port_to_phy(struct drm_i915_private *i915, enum port port);
> bool is_trans_port_sync_mode(const struct intel_crtc_state *state);
>
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c
> b/drivers/gpu/drm/i915/display/intel_dp.c
> index 2c29e7f5281b..d123e5a508c1 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -254,6 +254,29 @@ intel_dp_max_data_rate(int max_link_clock, int max_lanes)
> return max_link_clock * max_lanes;
> }
>
> +static bool intel_dp_can_bigjoiner(struct intel_dp *intel_dp)
> +{
> + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
> + struct intel_encoder *encoder = &intel_dig_port->base;
> + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> +
> + return INTEL_GEN(dev_priv) >= 12 ||
> + (INTEL_GEN(dev_priv) == 11 &&
> + encoder->port != PORT_A);
> +}
> +
> +static int intel_dp_max_dotclock(struct intel_dp *intel_dp, bool
> allow_bigjoiner)
> +{
> + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
> + struct intel_encoder *encoder = &intel_dig_port->base;
> + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> +
> + if (allow_bigjoiner && intel_dp_can_bigjoiner(intel_dp))
> + return 2 * dev_priv->max_dotclk_freq;
> +
> + return dev_priv->max_dotclk_freq;
> +}
> +
> static int cnl_max_source_rate(struct intel_dp *intel_dp)
> {
> struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
> @@ -519,7 +542,8 @@ small_joiner_ram_size_bits(struct drm_i915_private *i915)
>
> static u16 intel_dp_dsc_get_output_bpp(struct drm_i915_private *i915,
> u32 link_clock, u32 lane_count,
> - u32 mode_clock, u32 mode_hdisplay)
> + u32 mode_clock, u32 mode_hdisplay,
> + bool bigjoiner)
> {
> u32 bits_per_pixel, max_bpp_small_joiner_ram;
> int i;
> @@ -537,6 +561,10 @@ static u16 intel_dp_dsc_get_output_bpp(struct
> drm_i915_private *i915,
> /* Small Joiner Check: output bpp <= joiner RAM (bits) / Horiz. width */
> max_bpp_small_joiner_ram = small_joiner_ram_size_bits(i915) /
> mode_hdisplay;
> +
> + if (bigjoiner)
> + max_bpp_small_joiner_ram *= 2;
> +
> drm_dbg_kms(&i915->drm, "Max small joiner bpp: %u\n",
> max_bpp_small_joiner_ram);
>
> @@ -546,6 +574,15 @@ static u16 intel_dp_dsc_get_output_bpp(struct
> drm_i915_private *i915,
> */
> bits_per_pixel = min(bits_per_pixel, max_bpp_small_joiner_ram);
>
> + if (bigjoiner) {
> + u32 max_bpp_bigjoiner =
> + i915->max_cdclk_freq * 48 /
> + intel_dp_mode_to_fec_clock(mode_clock);
> +
> + DRM_DEBUG_KMS("Max big joiner bpp: %u\n", max_bpp_bigjoiner);
> + bits_per_pixel = min(bits_per_pixel, max_bpp_bigjoiner);
> + }
> +
> /* Error out if the max bpp is less than smallest allowed valid bpp */
> if (bits_per_pixel < valid_dsc_bpp[0]) {
> drm_dbg_kms(&i915->drm, "Unsupported BPP %u, min %u\n",
> @@ -568,7 +605,8 @@ static u16 intel_dp_dsc_get_output_bpp(struct
> drm_i915_private *i915,
> }
>
> static u8 intel_dp_dsc_get_slice_count(struct intel_dp *intel_dp,
> - int mode_clock, int mode_hdisplay)
> + int mode_clock, int mode_hdisplay,
> + bool bigjoiner)
> {
> struct drm_i915_private *i915 = dp_to_i915(intel_dp);
> u8 min_slice_count, i;
> @@ -595,12 +633,20 @@ static u8 intel_dp_dsc_get_slice_count(struct intel_dp
> *intel_dp,
>
> /* Find the closest match to the valid slice count values */
> for (i = 0; i < ARRAY_SIZE(valid_dsc_slicecount); i++) {
> - if (valid_dsc_slicecount[i] >
> - drm_dp_dsc_sink_max_slice_count(intel_dp->dsc_dpcd,
> - false))
> + u8 test_slice_count = bigjoiner ?
> + 2 * valid_dsc_slicecount[i] :
> + valid_dsc_slicecount[i];
> +
> + if (test_slice_count >
> + drm_dp_dsc_sink_max_slice_count(intel_dp->dsc_dpcd, false))
> break;
> - if (min_slice_count <= valid_dsc_slicecount[i])
> - return valid_dsc_slicecount[i];
> +
> + /* big joiner needs small joiner to be enabled */
> + if (bigjoiner && test_slice_count < 4)
> + continue;
> +
> + if (min_slice_count <= test_slice_count)
> + return test_slice_count;
> }
>
> drm_dbg_kms(&i915->drm, "Unsupported Slice Count %d\n",
> @@ -684,10 +730,6 @@ intel_dp_mode_valid_downstream(struct intel_connector
> *connector,
> const struct drm_display_info *info = &connector->base.display_info;
> int tmds_clock;
>
> - if (intel_dp->dfp.max_dotclock &&
> - target_clock > intel_dp->dfp.max_dotclock)
> - return MODE_CLOCK_HIGH;
> -
> /* Assume 8bpc for the DP++/HDMI/DVI TMDS clock check */
> tmds_clock = target_clock;
> if (drm_mode_is_420_only(info, mode))
> @@ -717,6 +759,7 @@ intel_dp_mode_valid(struct drm_connector *connector,
> u16 dsc_max_output_bpp = 0;
> u8 dsc_slice_count = 0;
> enum drm_mode_status status;
> + bool dsc = false, bigjoiner = false;
>
> if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
> return MODE_NO_DBLESCAN;
> @@ -724,6 +767,8 @@ intel_dp_mode_valid(struct drm_connector *connector,
> if (mode->flags & DRM_MODE_FLAG_DBLCLK)
> return MODE_H_ILLEGAL;
>
> + max_dotclk = intel_dp_max_dotclock(intel_dp, false);
> +
> if (intel_dp_is_edp(intel_dp) && fixed_mode) {
> if (mode->hdisplay > fixed_mode->hdisplay)
> return MODE_PANEL;
> @@ -737,6 +782,18 @@ intel_dp_mode_valid(struct drm_connector *connector,
> if (mode->clock < 10000)
> return MODE_CLOCK_LOW;
>
> + if (target_clock > max_dotclk) {
> + if (intel_dp_is_edp(intel_dp))
> + return MODE_CLOCK_HIGH;
Not sure why we check for edp?
> +
> + max_dotclk = intel_dp_max_dotclock(intel_dp, true);
> +
> + if (target_clock > max_dotclk)
> + return MODE_CLOCK_HIGH;
> +
> + bigjoiner = intel_dp_can_bigjoiner(intel_dp);
Isn't that just going to be =true always?
I guess the logic here is a bit confusing on account of the extra
roundtrips throught the other functions.
Might be less confusing to just avoid that stuff and
simplify this down to something like this:
max_dotclock = dev_priv->max_dotclk;
if (target_clock > max_dotclock && can_bigjoiner) {
bigjoiner = true;
max_dotclock *= 2;
}
if (target_clock > max_dotclock)
return CLOCK_HIGH;
> + }
> +
> max_link_clock = intel_dp_max_link_rate(intel_dp);
> max_lanes = intel_dp_max_lane_count(intel_dp);
>
> @@ -765,24 +822,35 @@ intel_dp_mode_valid(struct drm_connector *connector,
> max_link_clock,
> max_lanes,
> target_clock,
> - mode->hdisplay) >>
> 4;
> + mode->hdisplay,
> + bigjoiner) >> 4;
> dsc_slice_count =
> intel_dp_dsc_get_slice_count(intel_dp,
> target_clock,
> - mode->hdisplay);
> + mode->hdisplay,
> + bigjoiner);
> }
> +
> + dsc = dsc_max_output_bpp && dsc_slice_count;
> }
>
> - if ((mode_rate > max_rate && !(dsc_max_output_bpp && dsc_slice_count))
> ||
> - target_clock > max_dotclk)
> + /* big joiner configuration needs DSC */
> + if (bigjoiner && !dsc) {
> + DRM_DEBUG_KMS("Link clock needs bigjoiner, but DSC or FEC not
> available\n");
No debugs anywhere else in this function, so probably shouldn't have
them here either.
> return MODE_CLOCK_HIGH;
> + }
> +
> + if (mode_rate > max_rate && !dsc) {
> + DRM_DEBUG_KMS("Cannot drive without DSC\n");
ditto.
I guess if we wanted to differentiate between fail due to no dsc
vs. just clock is too high we could add something like
MODE_NO_COMPRESSION. Probably should take a good look at these
MODE_FOO values and nuke all unused ones...
> + return MODE_CLOCK_HIGH;
> + }
>
> status = intel_dp_mode_valid_downstream(intel_connector,
> mode, target_clock);
> if (status != MODE_OK)
> return status;
>
> - return intel_mode_valid_max_plane_size(dev_priv, mode);
> + return intel_mode_valid_max_plane_size(dev_priv, mode, bigjoiner);
> }
>
> u32 intel_dp_pack_aux(const u8 *src, int src_bytes)
> @@ -2297,11 +2365,13 @@ static int intel_dp_dsc_compute_config(struct
> intel_dp *intel_dp,
> pipe_config->port_clock,
> pipe_config->lane_count,
> adjusted_mode->crtc_clock,
> -
> adjusted_mode->crtc_hdisplay);
> +
> adjusted_mode->crtc_hdisplay,
> + false);
> dsc_dp_slice_count =
> intel_dp_dsc_get_slice_count(intel_dp,
> adjusted_mode->crtc_clock,
> -
> adjusted_mode->crtc_hdisplay);
> +
> adjusted_mode->crtc_hdisplay,
> + false);
> if (!dsc_max_output_bpp || !dsc_dp_slice_count) {
> drm_dbg_kms(&dev_priv->drm,
> "Compressed BPP/Slice Count not
> supported\n");
> diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c
> b/drivers/gpu/drm/i915/display/intel_dp_mst.c
> index c8fcec4d0788..fd5faa5d7c22 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp_mst.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c
> @@ -714,7 +714,7 @@ intel_dp_mst_mode_valid_ctx(struct drm_connector
> *connector,
> return 0;
> }
>
> - *status = intel_mode_valid_max_plane_size(dev_priv, mode);
> + *status = intel_mode_valid_max_plane_size(dev_priv, mode, true);
true?
> return 0;
> }
>
> diff --git a/drivers/gpu/drm/i915/display/intel_dsi.c
> b/drivers/gpu/drm/i915/display/intel_dsi.c
> index afa4e6817e8c..f453ceb8d149 100644
> --- a/drivers/gpu/drm/i915/display/intel_dsi.c
> +++ b/drivers/gpu/drm/i915/display/intel_dsi.c
> @@ -75,7 +75,7 @@ enum drm_mode_status intel_dsi_mode_valid(struct
> drm_connector *connector,
> return MODE_CLOCK_HIGH;
> }
>
> - return intel_mode_valid_max_plane_size(dev_priv, mode);
> + return intel_mode_valid_max_plane_size(dev_priv, mode, false);
> }
>
> struct intel_dsi_host *intel_dsi_host_init(struct intel_dsi *intel_dsi,
> diff --git a/drivers/gpu/drm/i915/display/intel_hdmi.c
> b/drivers/gpu/drm/i915/display/intel_hdmi.c
> index f90838bc74fb..82674a8853c6 100644
> --- a/drivers/gpu/drm/i915/display/intel_hdmi.c
> +++ b/drivers/gpu/drm/i915/display/intel_hdmi.c
> @@ -2274,7 +2274,7 @@ intel_hdmi_mode_valid(struct drm_connector *connector,
> if (status != MODE_OK)
> return status;
>
> - return intel_mode_valid_max_plane_size(dev_priv, mode);
> + return intel_mode_valid_max_plane_size(dev_priv, mode, false);
> }
>
> bool intel_hdmi_deep_color_possible(const struct intel_crtc_state
> *crtc_state,
> --
> 2.19.1
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
