On Fri, 27 Mar 2020, Vipin Anand <vipin.an...@intel.com> wrote:
> From: Uma Shankar <uma.shan...@intel.com>
>
> Gen9 hardware supports HDMI2.0 through LSPCON chips.
> Extending HDR support for MCA LSPCON based GEN9 devices.
>
> SOC will drive LSPCON as DP and send HDR metadata as standard
> DP SDP packets. LSPCON will be set to operate in PCON mode,
> will receive the metadata and create Dynamic Range and
> Mastering Infoframe (DRM packets) and send it to HDR capable
> HDMI sink devices.
>
> v2: Re-used hsw infoframe write implementation for HDR metadata
> for LSPCON as per Ville's suggestion.
>
> Signed-off-by: Uma Shankar <uma.shan...@intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_hdmi.c   | 10 ++++++
>  drivers/gpu/drm/i915/display/intel_lspcon.c | 35 +++++++++++++++------
>  drivers/gpu/drm/i915/display/intel_lspcon.h |  5 ++-
>  3 files changed, 39 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_hdmi.c 
> b/drivers/gpu/drm/i915/display/intel_hdmi.c
> index 93ac0f296852..9ae2f88cc925 100644
> --- a/drivers/gpu/drm/i915/display/intel_hdmi.c
> +++ b/drivers/gpu/drm/i915/display/intel_hdmi.c
> @@ -577,6 +577,16 @@ static u32 hsw_infoframes_enabled(struct intel_encoder 
> *encoder,
>       return val & mask;
>  }
>  
> +void lspcon_drm_write_infoframe(struct intel_encoder *encoder,
> +     const struct intel_crtc_state *crtc_state,
> +     unsigned int type,
> +     const void *frame, ssize_t len)
> +{
> +     DRM_DEBUG_KMS("Update HDR metadata for lspcon\n");
> +     /* It uses the legacy hsw implementation for the same */
> +     hsw_write_infoframe(encoder, crtc_state, type, frame, len);
> +}

This seems like an unnecessary wrapper.

> +
>  static const u8 infoframe_type_to_idx[] = {
>       HDMI_PACKET_TYPE_GENERAL_CONTROL,
>       HDMI_PACKET_TYPE_GAMUT_METADATA,
> diff --git a/drivers/gpu/drm/i915/display/intel_lspcon.c 
> b/drivers/gpu/drm/i915/display/intel_lspcon.c
> index 2e41ae483a23..c5ddabf903d6 100644
> --- a/drivers/gpu/drm/i915/display/intel_lspcon.c
> +++ b/drivers/gpu/drm/i915/display/intel_lspcon.c
> @@ -460,27 +460,42 @@ void lspcon_write_infoframe(struct intel_encoder 
> *encoder,
>                           unsigned int type,
>                           const void *frame, ssize_t len)
>  {
> -     bool ret;
> +     bool ret = true;
>       struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
>       struct intel_lspcon *lspcon = enc_to_intel_lspcon(encoder);
>  
>       /* LSPCON only needs AVI IF */
> -     if (type != HDMI_INFOFRAME_TYPE_AVI)
> +     if (!(type == HDMI_INFOFRAME_TYPE_AVI ||
> +           type == HDMI_PACKET_TYPE_GAMUT_METADATA))
>               return;
>  
> -     if (lspcon->vendor == LSPCON_VENDOR_MCA)
> -             ret = _lspcon_write_avi_infoframe_mca(&intel_dp->aux,
> -                                                   frame, len);
> -     else
> -             ret = _lspcon_write_avi_infoframe_parade(&intel_dp->aux,
> -                                                      frame, len);
> +     /*
> +      * Supporting HDR on MCA LSPCON
> +      * Todo: Add support for Parade later
> +      */
> +     if (type == HDMI_PACKET_TYPE_GAMUT_METADATA &&
> +         lspcon->vendor != LSPCON_VENDOR_MCA)
> +             return;
> +
> +     if (lspcon->vendor == LSPCON_VENDOR_MCA) {
> +             if (type == HDMI_INFOFRAME_TYPE_AVI)
> +                     ret = _lspcon_write_avi_infoframe_mca(&intel_dp->aux,
> +                                                           frame, len);
> +             else if (type == HDMI_PACKET_TYPE_GAMUT_METADATA)
> +                     lspcon_drm_write_infoframe(encoder, crtc_state,
> +                                                
> HDMI_PACKET_TYPE_GAMUT_METADATA,
> +                                                frame, VIDEO_DIP_DATA_SIZE);
> +     } else {
> +             ret = _lspcon_write_avi_infoframe_parade(&intel_dp->aux, frame,
> +                                                      len);
> +     }

Seems to me it would be best to replace from the beginning of this
function with something like:

        switch (type) {
        case HDMI_INFOFRAME_TYPE_AVI:
                if (lspcon->vendor == LSPCON_VENDOR_MCA)
                        ...
                else
                        ...
                break;
        case HDMI_PACKET_TYPE_GAMUT_METADATA:
                if (lspcon->vendor == LSPCON_VENDOR_MCA)
                        ...
                else
                        break;
                break;
        default:
                return;
        }

Then it'll be straightforward to replace the actual vendor specific if
ladders with function pointers in struct intel_lspcon in the future.

>  
>       if (!ret) {
> -             DRM_ERROR("Failed to write AVI infoframes\n");
> +             DRM_ERROR("Failed to write infoframes\n");
>               return;
>       }
>  
> -     DRM_DEBUG_DRIVER("AVI infoframes updated successfully\n");
> +     DRM_DEBUG_DRIVER("Infoframes updated successfully\n");
>  }
>  
>  void lspcon_read_infoframe(struct intel_encoder *encoder,
> diff --git a/drivers/gpu/drm/i915/display/intel_lspcon.h 
> b/drivers/gpu/drm/i915/display/intel_lspcon.h
> index 37cfddf8a9c5..b2051f236223 100644
> --- a/drivers/gpu/drm/i915/display/intel_lspcon.h
> +++ b/drivers/gpu/drm/i915/display/intel_lspcon.h
> @@ -34,5 +34,8 @@ u32 lspcon_infoframes_enabled(struct intel_encoder *encoder,
>                             const struct intel_crtc_state *pipe_config);
>  void lspcon_ycbcr420_config(struct drm_connector *connector,
>                           struct intel_crtc_state *crtc_state);
> -
> +void lspcon_drm_write_infoframe(struct intel_encoder *encoder,
> +                             const struct intel_crtc_state *crtc_state,
> +                             unsigned int type,
> +                             const void *frame, ssize_t len);
>  #endif /* __INTEL_LSPCON_H__ */

-- 
Jani Nikula, Intel Open Source Graphics Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Reply via email to