On Tue, 03 Mar 2020, Hans de Goede <hdego...@redhat.com> wrote:
> Hi All,
>
> On 2/21/20 6:29 PM, Hans de Goede wrote:
>> Use intel_panel_compute_brightness() from pwm_setup_backlight() so that
>> we correctly take i915_modparams.invert_brightness and/or
>> QUIRK_INVERT_BRIGHTNESS into account when setting + getting the initial
>> brightness value.
>>
>> Signed-off-by: Hans de Goede <hdego...@redhat.com>
>
> ping? Any chance I can get a review from someone on this series?
>
> Both patches are pretty trivial really...
For both,
Reviewed-by: Jani Nikula <jani.nik...@intel.com>
And sad trombone, I was hoping I could nuke the whole module parameter
one of these days. It used to be something associated with gen4 only.
BR,
Jani.
>
> Regards,
>
> Hans
>
>
>
>> ---
>> drivers/gpu/drm/i915/display/intel_panel.c | 18 +++++++++++-------
>> 1 file changed, 11 insertions(+), 7 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/i915/display/intel_panel.c
>> b/drivers/gpu/drm/i915/display/intel_panel.c
>> index 7b3ec6eb3382..9ebee7d93414 100644
>> --- a/drivers/gpu/drm/i915/display/intel_panel.c
>> +++ b/drivers/gpu/drm/i915/display/intel_panel.c
>> @@ -1843,6 +1843,7 @@ static int pwm_setup_backlight(struct intel_connector
>> *connector,
>> struct drm_i915_private *dev_priv = to_i915(dev);
>> struct intel_panel *panel = &connector->panel;
>> const char *desc;
>> + u32 level, ns;
>> int retval;
>>
>> /* Get the right PWM chip for DSI backlight according to VBT */
>> @@ -1866,8 +1867,12 @@ static int pwm_setup_backlight(struct intel_connector
>> *connector,
>> */
>> pwm_apply_args(panel->backlight.pwm);
>>
>> - retval = pwm_config(panel->backlight.pwm, CRC_PMIC_PWM_PERIOD_NS,
>> - CRC_PMIC_PWM_PERIOD_NS);
>> + panel->backlight.min = 0; /* 0% */
>> + panel->backlight.max = 100; /* 100% */
>> + level = intel_panel_compute_brightness(connector, 100);
>> + ns = DIV_ROUND_UP(level * CRC_PMIC_PWM_PERIOD_NS, 100);
>> +
>> + retval = pwm_config(panel->backlight.pwm, ns, CRC_PMIC_PWM_PERIOD_NS);
>> if (retval < 0) {
>> DRM_ERROR("Failed to configure the pwm chip\n");
>> pwm_put(panel->backlight.pwm);
>> @@ -1875,11 +1880,10 @@ static int pwm_setup_backlight(struct
>> intel_connector *connector,
>> return retval;
>> }
>>
>> - panel->backlight.min = 0; /* 0% */
>> - panel->backlight.max = 100; /* 100% */
>> - panel->backlight.level = DIV_ROUND_UP(
>> - pwm_get_duty_cycle(panel->backlight.pwm) * 100,
>> - CRC_PMIC_PWM_PERIOD_NS);
>> + level = DIV_ROUND_UP(pwm_get_duty_cycle(panel->backlight.pwm) * 100,
>> + CRC_PMIC_PWM_PERIOD_NS);
>> + panel->backlight.level =
>> + intel_panel_compute_brightness(connector, level);
>> panel->backlight.enabled = panel->backlight.level != 0;
>>
>> DRM_INFO("Using %s PWM for LCD backlight control\n", desc);
>>
>
--
Jani Nikula, Intel Open Source Graphics Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
