Hi Takashi/Daniel, This patch could be used to replace below two: http://lists.freedesktop.org/archives/intel-gfx/2013-June/029076.html http://lists.freedesktop.org/archives/intel-gfx/2013-June/029077.html
It could avoid lots of changes in gfx side. I test the patch and it could fix the same routing issues. thanks --xingchao > -----Original Message----- > From: Wang Xingchao [mailto:xingchao.w...@linux.intel.com] > Sent: Tuesday, June 18, 2013 4:32 PM > To: ti...@suse.de > Cc: daniel.vet...@ffwll.ch; alsa-de...@alsa-project.org; > intel-gfx@lists.freedesktop.org; Wang, Xingchao; Wang Xingchao > Subject: [PATCH] ALSA: hda - Avoid choose same converter for unused pins > > For Intel Haswell HDMI codecs, the pins choose converter 0 by default. > This would cause conflict when playing audio on unused pins,the pin with > physical device connected would get audio data too. > i.e. Pin 0/1/2 default choose converter 0, pin 1 has HDMI monitor connected. > when play audio on Pin 0 or pin 2, pin 1 could get audio data too. > > This patch configure unused pins to choose different converter. > > Signed-off-by: Wang Xingchao <xingchao.w...@linux.intel.com> > --- > sound/pci/hda/patch_hdmi.c | 89 > +++++++++++++++++++++++++++++++++++++------- > 1 file changed, 75 insertions(+), 14 deletions(-) > > diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index > 8983747..e887584 100644 > --- a/sound/pci/hda/patch_hdmi.c > +++ b/sound/pci/hda/patch_hdmi.c > @@ -1110,26 +1110,15 @@ static int hdmi_setup_stream(struct hda_codec > *codec, hda_nid_t cvt_nid, > return 0; > } > > -/* > - * HDA PCM callbacks > - */ > -static int hdmi_pcm_open(struct hda_pcm_stream *hinfo, > - struct hda_codec *codec, > - struct snd_pcm_substream *substream) > +static int hdmi_choose_cvt(struct hda_codec *codec, > + int pin_idx, int *cvt_id, int *mux_id) > { > struct hdmi_spec *spec = codec->spec; > - struct snd_pcm_runtime *runtime = substream->runtime; > - int pin_idx, cvt_idx, mux_idx = 0; > struct hdmi_spec_per_pin *per_pin; > - struct hdmi_eld *eld; > struct hdmi_spec_per_cvt *per_cvt = NULL; > + int cvt_idx, mux_idx = 0; > > - /* Validate hinfo */ > - pin_idx = hinfo_to_pin_index(spec, hinfo); > - if (snd_BUG_ON(pin_idx < 0)) > - return -EINVAL; > per_pin = get_pin(spec, pin_idx); > - eld = &per_pin->sink_eld; > > /* Dynamically assign converter to stream */ > for (cvt_idx = 0; cvt_idx < spec->num_cvts; cvt_idx++) { @@ -1147,10 > +1136,77 @@ static int hdmi_pcm_open(struct hda_pcm_stream *hinfo, > continue; > break; > } > + > /* No free converters */ > if (cvt_idx == spec->num_cvts) > return -ENODEV; > > + if (cvt_id) > + *cvt_id = cvt_idx; > + if (mux_id) > + *mux_id = mux_idx; > + > + return 0; > +} > + > +static void haswell_config_cvts(struct hda_codec *codec, > + int pin_id, int mux_id) > +{ > + struct hdmi_spec *spec = codec->spec; > + struct hdmi_spec_per_pin *per_pin; > + int pin_idx, mux_idx; > + int curr = -1; > + int err; > + > + for (pin_idx = 0; pin_idx < spec->num_pins; pin_idx++) { > + per_pin = get_pin(spec, pin_idx); > + > + if (pin_idx == pin_id) > + continue; > + > + curr = snd_hda_codec_read(codec, per_pin->pin_nid, 0, > + AC_VERB_GET_CONNECT_SEL, 0); > + > + /* Choose another unused converter */ > + if (curr == mux_id) { > + err = hdmi_choose_cvt(codec, pin_idx, NULL, &mux_idx); > + if (err < 0) > + return; > + snd_printk("HDMI: choose converter %d for pin %d\n", > mux_idx, > pin_idx); > + snd_hda_codec_write(codec, per_pin->pin_nid, 0, > + AC_VERB_SET_CONNECT_SEL, > + mux_idx); > + } > + } > +} > + > +/* > + * HDA PCM callbacks > + */ > +static int hdmi_pcm_open(struct hda_pcm_stream *hinfo, > + struct hda_codec *codec, > + struct snd_pcm_substream *substream) { > + struct hdmi_spec *spec = codec->spec; > + struct snd_pcm_runtime *runtime = substream->runtime; > + int pin_idx, cvt_idx, mux_idx = 0; > + struct hdmi_spec_per_pin *per_pin; > + struct hdmi_eld *eld; > + struct hdmi_spec_per_cvt *per_cvt = NULL; > + int err; > + > + /* Validate hinfo */ > + pin_idx = hinfo_to_pin_index(spec, hinfo); > + if (snd_BUG_ON(pin_idx < 0)) > + return -EINVAL; > + per_pin = get_pin(spec, pin_idx); > + eld = &per_pin->sink_eld; > + > + err = hdmi_choose_cvt(codec, pin_idx, &cvt_idx, &mux_idx); > + if (err < 0) > + return err; > + > + per_cvt = get_cvt(spec, cvt_idx); > /* Claim converter */ > per_cvt->assigned = 1; > hinfo->nid = per_cvt->cvt_nid; > @@ -1158,6 +1214,11 @@ static int hdmi_pcm_open(struct hda_pcm_stream > *hinfo, > snd_hda_codec_write(codec, per_pin->pin_nid, 0, > AC_VERB_SET_CONNECT_SEL, > mux_idx); > + > + /* configure unused pins to choose other converters */ > + if (codec->vendor_id == 0x80862807) > + haswell_config_cvts(codec, pin_idx, mux_idx); > + > snd_hda_spdif_ctls_assign(codec, pin_idx, per_cvt->cvt_nid); > > /* Initially set the converter's capabilities */ > -- > 1.7.9.5 _______________________________________________ Intel-gfx mailing list Intel-gfx@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/intel-gfx
