At Tue, 18 Jun 2013 10:41:53 +0800,
Wang Xingchao wrote:
> 
> Haswell converters maybe in wrong power state before usage.
> i.e. only converter 0 is in D0, converter 1/2 are in D3.
> When pin choose converter 1/2, there's no audio output, this
> cause dependency when playing differnt stream on pins.
> 
> AUD_PWRST  ConvertorA_Widget_Power_State_Current        D0
> AUD_PWRST  ConvertorA_Widget_Power_State_Requsted       D0
> AUD_PWRST  ConvertorB_Widget_Power_State_Current        D3
> AUD_PWRST  ConvertorB_Widget_Power_State_Requested      D3
> AUD_PWRST  ConvC_Widget_PwrSt_Curr                      D3
> AUD_PWRST  ConvC_Widget_PwrSt_Req                       D3
> 
> This patch check converter's power state and set D0 if it's in D3 mode.
> 
> Signed-off-by: Wang Xingchao <xingchao.w...@linux.intel.com>

Thanks, applied.


Takashi

> ---
>  sound/pci/hda/patch_hdmi.c | 13 +++++++++++--
>  1 file changed, 11 insertions(+), 2 deletions(-)
> 
> diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
> index e12f7a0..760eeb1 100644
> --- a/sound/pci/hda/patch_hdmi.c
> +++ b/sound/pci/hda/patch_hdmi.c
> @@ -1018,10 +1018,19 @@ static void hdmi_unsol_event(struct hda_codec *codec, 
> unsigned int res)
>               hdmi_non_intrinsic_event(codec, res);
>  }
>  
> -static void haswell_verify_pin_D0(struct hda_codec *codec, hda_nid_t nid)
> +static void haswell_verify_pin_D0(struct hda_codec *codec,
> +             hda_nid_t cvt_nid, hda_nid_t nid)
>  {
>       int pwr, lamp, ramp;
>  
> +     /* For Haswell, the converter 1/2 may keep in D3 state after bootup,
> +      * thus pins could only choose converter 0 for use. Make sure the
> +      * converters are in correct power state */
> +     pwr = snd_hda_codec_read(codec, cvt_nid, 0, AC_VERB_GET_POWER_STATE, 0);
> +     pwr = (pwr & AC_PWRST_ACTUAL) >> AC_PWRST_ACTUAL_SHIFT;
> +     if (pwr != AC_PWRST_D0)
> +             snd_hda_codec_write(codec, cvt_nid, 0, AC_VERB_SET_POWER_STATE, 
> AC_PWRST_D0);
> +
>       pwr = snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_POWER_STATE, 0);
>       pwr = (pwr & AC_PWRST_ACTUAL) >> AC_PWRST_ACTUAL_SHIFT;
>       if (pwr != AC_PWRST_D0) {
> @@ -1068,7 +1077,7 @@ static int hdmi_setup_stream(struct hda_codec *codec, 
> hda_nid_t cvt_nid,
>       int new_pinctl = 0;
>  
>       if (codec->vendor_id == 0x80862807)
> -             haswell_verify_pin_D0(codec, pin_nid);
> +             haswell_verify_pin_D0(codec, cvt_nid, pin_nid);
>  
>       if (snd_hda_query_pin_caps(codec, pin_nid) & AC_PINCAP_HBR) {
>               pinctl = snd_hda_codec_read(codec, pin_nid, 0,
> -- 
> 1.8.1.2
> 
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

Reply via email to