Haswell converters maybe in wrong power state before usage.
i.e. only converter 0 is in D0, converter 1/2 are in D3.
When pin choose converter 1/2, there's no audio output.
Signed-off-by: Wang Xingchao <xingchao.w...@linux.intel.com>
---
sound/pci/hda/patch_hdmi.c | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
index e12f7a0..8db5eb6 100644
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -1053,6 +1053,23 @@ static void haswell_verify_pin_D0(struct hda_codec
*codec, hda_nid_t nid)
}
}
+static void hsw_verify_cvt_D0(struct hdmi_spec *spec,
+ struct hda_codec *codec)
+{
+ struct hdmi_spec_per_cvt *per_cvt;
+ int pwr, cvt_idx;
+
+ for (cvt_idx = 0; cvt_idx < spec->num_cvts; cvt_idx++) {
+ per_cvt = get_cvt(spec, cvt_idx);
+ pwr = snd_hda_codec_read(codec, per_cvt->cvt_nid, 0,
+ AC_VERB_GET_POWER_STATE, 0);
+ pwr = (pwr & AC_PWRST_ACTUAL) >> AC_PWRST_ACTUAL_SHIFT;
+ if (pwr != AC_PWRST_D0)
+ snd_hda_codec_write(codec, per_cvt->cvt_nid, 0,
AC_VERB_SET_POWER_STATE,
+ AC_PWRST_D0);
+ }
+}
+
/*
* Callbacks
*/
@@ -1122,6 +1139,9 @@ static int hdmi_pcm_open(struct hda_pcm_stream *hinfo,
per_pin = get_pin(spec, pin_idx);
eld = &per_pin->sink_eld;
+ if (codec->vendor_id == 0x80862807)
+ hsw_verify_cvt_D0(spec, codec);
+
/* Dynamically assign converter to stream */
for (cvt_idx = 0; cvt_idx < spec->num_cvts; cvt_idx++) {
per_cvt = get_cvt(spec, cvt_idx);
--
1.8.1.2
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
