On Tue, Jun 11, 2013 at 11:08:16PM +0300, ville.syrj...@linux.intel.com wrote:
> From: Ville Syrjälä <ville.syrj...@linux.intel.com>
> 
> The current PLL settings produce a rather unstable picture when
> I hook up a VLV to my HP ZR24w display via a VGA cable. Switching
> the PLL to hybrid mode makes the picture a lot more stable. No
> idea if this is truly wise though...

Ok, you've just slipped up here and mentioned that the changed bit is for
"hybrid mode". Can I have real register defines for this magic now please?

Apparently Jesse just weaseled out of real work claiming that it's not
documented at all ;-)

Cheers, Daniel

> 
> Signed-off-by: Ville Syrjälä <ville.syrj...@linux.intel.com>
> ---
>  drivers/gpu/drm/i915/intel_display.c | 12 +++++++++---
>  1 file changed, 9 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_display.c 
> b/drivers/gpu/drm/i915/intel_display.c
> index 29f2c0d..8c30a4c 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -4412,8 +4412,14 @@ static void vlv_update_pll(struct intel_crtc *crtc)
>               vlv_dpio_write(dev_priv, DPIO_LFP_COEFF(pipe),
>                                0x00d0000f);
>  
> -     if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_EDP) ||
> -         intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DISPLAYPORT)) {
> +     if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_ANALOG)) {
> +             /* XXX this gives a less shivery picture */
> +             if (!pipe)
> +                     vlv_dpio_write(dev_priv, DPIO_REFSFR(pipe), 0x08f70000);
> +             else
> +                     vlv_dpio_write(dev_priv, DPIO_REFSFR(pipe), 0x08f40000);
> +     } else if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_EDP) ||
> +                intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DISPLAYPORT)) {
>               /* Use SSC source */
>               if (!pipe)
>                       vlv_dpio_write(dev_priv, DPIO_REFSFR(pipe),
> @@ -4421,7 +4427,7 @@ static void vlv_update_pll(struct intel_crtc *crtc)
>               else
>                       vlv_dpio_write(dev_priv, DPIO_REFSFR(pipe),
>                                        0x0df70000);
> -     } else { /* HDMI or VGA */
> +     } else { /* HDMI */
>               /* Use bend source */
>               if (!pipe)
>                       vlv_dpio_write(dev_priv, DPIO_REFSFR(pipe),
> -- 
> 1.8.1.5
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

Reply via email to