We've long had the more generic /dev/drm_dp_auxN devices for the same
purpose. Drop the redundant and limited DPCD debugfs file.
Signed-off-by: Jani Nikula <jani.nik...@intel.com>
---
drivers/gpu/drm/i915/i915_debugfs.c | 64 -----------------------------
1 file changed, 64 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_debugfs.c
b/drivers/gpu/drm/i915/i915_debugfs.c
index c05fa4205de8..e320b957b792 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -4329,65 +4329,6 @@ int i915_debugfs_register(struct drm_i915_private
*dev_priv)
minor->debugfs_root, minor);
}
-struct dpcd_block {
- /* DPCD dump start address. */
- unsigned int offset;
- /* DPCD dump end address, inclusive. If unset, .size will be used. */
- unsigned int end;
- /* DPCD dump size. Used if .end is unset. If unset, defaults to 1. */
- size_t size;
- /* Only valid for eDP. */
- bool edp;
-};
-
-static const struct dpcd_block i915_dpcd_debug[] = {
- { .offset = DP_DPCD_REV, .size = DP_RECEIVER_CAP_SIZE },
- { .offset = DP_PSR_SUPPORT, .end = DP_PSR_CAPS },
- { .offset = DP_DOWNSTREAM_PORT_0, .size = 16 },
- { .offset = DP_LINK_BW_SET, .end = DP_EDP_CONFIGURATION_SET },
- { .offset = DP_SINK_COUNT, .end = DP_ADJUST_REQUEST_LANE2_3 },
- { .offset = DP_SET_POWER },
- { .offset = DP_EDP_DPCD_REV },
- { .offset = DP_EDP_GENERAL_CAP_1, .end = DP_EDP_GENERAL_CAP_3 },
- { .offset = DP_EDP_DISPLAY_CONTROL_REGISTER, .end =
DP_EDP_BACKLIGHT_FREQ_CAP_MAX_LSB },
- { .offset = DP_EDP_DBC_MINIMUM_BRIGHTNESS_SET, .end =
DP_EDP_DBC_MAXIMUM_BRIGHTNESS_SET },
-};
-
-static int i915_dpcd_show(struct seq_file *m, void *data)
-{
- struct drm_connector *connector = m->private;
- struct intel_dp *intel_dp =
-
enc_to_intel_dp(intel_attached_encoder(to_intel_connector(connector)));
- u8 buf[16];
- ssize_t err;
- int i;
-
- if (connector->status != connector_status_connected)
- return -ENODEV;
-
- for (i = 0; i < ARRAY_SIZE(i915_dpcd_debug); i++) {
- const struct dpcd_block *b = &i915_dpcd_debug[i];
- size_t size = b->end ? b->end - b->offset + 1 : (b->size ?: 1);
-
- if (b->edp &&
- connector->connector_type != DRM_MODE_CONNECTOR_eDP)
- continue;
-
- /* low tech for now */
- if (WARN_ON(size > sizeof(buf)))
- continue;
-
- err = drm_dp_dpcd_read(&intel_dp->aux, b->offset, buf, size);
- if (err < 0)
- seq_printf(m, "%04x: ERROR %d\n", b->offset, (int)err);
- else
- seq_printf(m, "%04x: %*ph\n", b->offset, (int)err, buf);
- }
-
- return 0;
-}
-DEFINE_SHOW_ATTRIBUTE(i915_dpcd);
-
static int i915_panel_show(struct seq_file *m, void *data)
{
struct drm_connector *connector = m->private;
@@ -4552,11 +4493,6 @@ int i915_debugfs_connector_add(struct drm_connector
*connector)
if (!root)
return -ENODEV;
- if (connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort ||
- connector->connector_type == DRM_MODE_CONNECTOR_eDP)
- debugfs_create_file("i915_dpcd", S_IRUGO, root,
- connector, &i915_dpcd_fops);
-
if (connector->connector_type == DRM_MODE_CONNECTOR_eDP) {
debugfs_create_file("i915_panel_timings", S_IRUGO, root,
connector, &i915_panel_fops);
--
2.20.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
