On Wed, Dec 11, 2019 at 10:45:23AM -0800, José Roberto de Souza wrote:
> Due to DDB overlaps the pipe enabling sequence is not always crescent.
> As the previous patch selects the smallest pipe/transcoder in the MST
> stream to be master and it needs to be enabled first this changes
> were needed to guarantee that.
>
> So first lets enable all pipes that did not needed a fullmodeset so
> it don't have any external dependency, this ones can overlap with
> each other ddb allocations.
>
> Then on the second loop it will enable all the pipes that needs a
> modeset and don't depends on other pipes like MST master
> pipe/transcoder.
>
> Then finally all the pipes that needs a modeset and have dependency
> on other pipes.
>
> Cc: Ville Syrjälä <ville.syrj...@linux.intel.com>
> Cc: Maarten Lankhorst <maarten.lankho...@linux.intel.com>
> Cc: Matt Roper <matthew.d.ro...@intel.com>
> Cc: Manasi Navare <manasi.d.nav...@intel.com>
> Signed-off-by: José Roberto de Souza <jose.so...@intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_display.c | 77 ++++++++++++++------
> 1 file changed, 56 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c
> b/drivers/gpu/drm/i915/display/intel_display.c
> index 1cecce2f54f8..fa58b396e084 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -14566,18 +14566,24 @@ static void skl_commit_modeset_enables(struct
> intel_atomic_state *state)
> /*
> * Whenever the number of active pipes changes, we need to make sure we
> * update the pipes in the right order so that their ddb allocations
> - * never overlap with eachother inbetween CRTC updates. Otherwise we'll
> + * never overlap with each other between CRTC updates. Otherwise we'll
> * cause pipe underruns and other bad stuff.
> + *
> + * So first lets enable all pipes that did not needed a fullmodeset so
> + * it don't have any external dependency
> */
> do {
> progress = false;
>
> - for_each_oldnew_intel_crtc_in_state(state, crtc,
> old_crtc_state, new_crtc_state, i) {
> - enum pipe pipe = crtc->pipe;
> - bool vbl_wait = false;
> - bool modeset = needs_modeset(new_crtc_state);
> + for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state,
> + new_crtc_state, i) {
> + bool vbl_wait;
> +
> + if (updated & BIT(crtc->pipe) ||
> + !new_crtc_state->hw.active)
> + continue;
>
> - if (updated & BIT(crtc->pipe) ||
> !new_crtc_state->hw.active)
> + if (needs_modeset(new_crtc_state))
> continue;
>
> if
> (skl_ddb_allocation_overlaps(&new_crtc_state->wm.skl.ddb,
> @@ -14585,7 +14591,7 @@ static void skl_commit_modeset_enables(struct
> intel_atomic_state *state)
>
> INTEL_NUM_PIPES(dev_priv), i))
> continue;
>
> - updated |= BIT(pipe);
> + updated |= BIT(crtc->pipe);
> entries[i] = new_crtc_state->wm.skl.ddb;
>
> /*
> @@ -14596,30 +14602,59 @@ static void skl_commit_modeset_enables(struct
> intel_atomic_state *state)
> */
> if (!skl_ddb_entry_equal(&new_crtc_state->wm.skl.ddb,
> &old_crtc_state->wm.skl.ddb) &&
> - !modeset &&
> state->wm_results.dirty_pipes != updated)
I have a feeling this part is already broken. However I just pushed the
patch to change this to a local dirty_pipes mask. I think what we could
now do on top is split that into eg. update_pipes+modeset_pipes
bitmasks.
Then the first loop just does its thing until update_pipes is
empty. And this check here we can replace with just something like:
if (!ddb_equal() &&
(update_pipes | modeset_pipes) != 0)
And throw out all modeset checks here because we've already
encoded that in update_pipes vs. modeset_pipes.
> vbl_wait = true;
>
> - if (modeset && is_trans_port_sync_mode(new_crtc_state))
> {
> - if (is_trans_port_sync_master(new_crtc_state))
> - intel_update_trans_port_sync_crtcs(crtc,
> -
> state,
> -
> old_crtc_state,
> -
> new_crtc_state);
> - else
> - continue;
> - } else {
> - intel_update_crtc(crtc, state, old_crtc_state,
> - new_crtc_state);
> - }
> + intel_update_crtc(crtc, state, old_crtc_state,
> + new_crtc_state);
>
> if (vbl_wait)
> - intel_wait_for_vblank(dev_priv, pipe);
> + intel_wait_for_vblank(dev_priv, crtc->pipe);
>
> progress = true;
> }
> } while (progress);
>
> + /*
> + * Enabling all pipes that needs a modeset and do not depends on other
> + * pipes
> + */
> + for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state,
> + new_crtc_state, i) {
> + if (updated & BIT(crtc->pipe) || !new_crtc_state->hw.active)
> + continue;
> +
> + if (intel_dp_mst_is_slave_trans(new_crtc_state) ||
> + is_trans_port_sync_slave(new_crtc_state))
> + continue;
> +
> + updated |= BIT(crtc->pipe);
I think we should update entries[] still in these lopps + WARN_ON(ddb_overlaps).
> +
> + if (is_trans_port_sync_mode(new_crtc_state))
> + intel_update_trans_port_sync_crtcs(crtc, state,
> + old_crtc_state,
> + new_crtc_state);
> + else
> + intel_update_crtc(crtc, state, old_crtc_state,
> + new_crtc_state);
> + }
> +
> + /*
> + * Finally enable all pipes that needs a modeset and depends on
> + * other pipes, right now it is only MST slaves as both port sync slave
> + * and master are enabled together
> + */
> + for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state,
> + new_crtc_state, i) {
> + if (updated & BIT(crtc->pipe) || !new_crtc_state->hw.active)
> + continue;
> +
> + if (is_trans_port_sync_slave(new_crtc_state))
> + continue;
> +
> + intel_update_crtc(crtc, state, old_crtc_state, new_crtc_state);
> + }
> +
> /* If 2nd DBuf slice is no more required disable it */
> if (INTEL_GEN(dev_priv) >= 11 && required_slices < hw_enabled_slices)
> icl_dbuf_slices_update(dev_priv, required_slices);
> --
> 2.24.1
--
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
