Commit 9c722e17c1b9 ("drm/i915: Disable pipes in reverse order")
reverted the order that pipes gets disabled because of TGL
master/slave relationship between transcoders in MST mode.
But as stated in a comment in skl_commit_modeset_enables() the
enabling order is not always crescent, possibly causing previously
selected slave transcoder being enabled before master so another
approach will be needed to select a transcoder to master in MST mode.
It will be similar to the approach taken in port sync.
But instead of implement something like
intel_trans_port_sync_modeset_disables() to MST lets simply it and
iterate over all pipes 2 times, the first one disabling any slave and
then disabling everything else.
The MST bits will be added in another patch.
v2:
Not using crtc->active as it is deprecated
Cc: Lucas De Marchi <lucas.demar...@intel.com>
Cc: Manasi Navare <manasi.d.nav...@intel.com>
Cc: Matt Roper <matthew.d.ro...@intel.com>
Cc: Maarten Lankhorst <maarten.lankho...@linux.intel.com>
Cc: Ville Syrjälä <ville.syrj...@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.so...@intel.com>
---
drivers/gpu/drm/i915/display/intel_display.c | 86 +++++++-------------
1 file changed, 30 insertions(+), 56 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_display.c
b/drivers/gpu/drm/i915/display/intel_display.c
index 68575457d40e..a9f5aaf8df9b 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -14393,77 +14393,51 @@ static void intel_old_crtc_state_disables(struct
intel_atomic_state *state,
dev_priv->display.initial_watermarks(state, crtc);
}
-static void intel_trans_port_sync_modeset_disables(struct intel_atomic_state
*state,
- struct intel_crtc *crtc,
- struct intel_crtc_state
*old_crtc_state,
- struct intel_crtc_state
*new_crtc_state)
-{
- struct intel_crtc *slave_crtc = intel_get_slave_crtc(new_crtc_state);
- struct intel_crtc_state *new_slave_crtc_state =
- intel_atomic_get_new_crtc_state(state, slave_crtc);
- struct intel_crtc_state *old_slave_crtc_state =
- intel_atomic_get_old_crtc_state(state, slave_crtc);
-
- WARN_ON(!slave_crtc || !new_slave_crtc_state ||
- !old_slave_crtc_state);
-
- /* Disable Slave first */
- intel_pre_plane_update(state, slave_crtc);
- if (old_slave_crtc_state->hw.active)
- intel_old_crtc_state_disables(state,
- old_slave_crtc_state,
- new_slave_crtc_state,
- slave_crtc);
-
- /* Disable Master */
- intel_pre_plane_update(state, crtc);
- if (old_crtc_state->hw.active)
- intel_old_crtc_state_disables(state,
- old_crtc_state,
- new_crtc_state,
- crtc);
-}
-
static void intel_commit_modeset_disables(struct intel_atomic_state *state)
{
struct intel_crtc_state *new_crtc_state, *old_crtc_state;
struct intel_crtc *crtc;
+ u32 handled = 0;
int i;
- /*
- * Disable CRTC/pipes in reverse order because some features(MST in
- * TGL+) requires master and slave relationship between pipes, so it
- * should always pick the lowest pipe as master as it will be enabled
- * first and disable in the reverse order so the master will be the
- * last one to be disabled.
- */
- for_each_oldnew_intel_crtc_in_state_reverse(state, crtc, old_crtc_state,
- new_crtc_state, i) {
+ /* Only disable port sync slaves */
+ for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state,
+ new_crtc_state, i) {
if (!needs_modeset(new_crtc_state))
continue;
+ /* If it wasn't active no need to check the special cases */
+ if (!old_crtc_state->hw.active)
+ continue;
+
/* In case of Transcoder port Sync master slave CRTCs can be
* assigned in any order and we need to make sure that
* slave CRTCs are disabled first and then master CRTC since
* Slave vblanks are masked till Master Vblanks.
*/
- if (is_trans_port_sync_mode(old_crtc_state)) {
- if (is_trans_port_sync_master(old_crtc_state))
- intel_trans_port_sync_modeset_disables(state,
- crtc,
-
old_crtc_state,
-
new_crtc_state);
- else
- continue;
- } else {
- intel_pre_plane_update(state, crtc);
+ if (!is_trans_port_sync_mode(old_crtc_state))
+ continue;
- if (old_crtc_state->hw.active)
- intel_old_crtc_state_disables(state,
- old_crtc_state,
- new_crtc_state,
- crtc);
- }
+ if (is_trans_port_sync_master(old_crtc_state))
+ continue;
+
+ intel_pre_plane_update(state, crtc);
+ intel_old_crtc_state_disables(state, old_crtc_state,
+ new_crtc_state, crtc);
+ handled |= BIT(crtc->pipe);
+ }
+
+ /* Disable everything else left on */
+ for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state,
+ new_crtc_state, i) {
+ if (!needs_modeset(new_crtc_state) ||
+ (handled & BIT(crtc->pipe)))
+ continue;
+
+ intel_pre_plane_update(state, crtc);
+ if (old_crtc_state->hw.active)
+ intel_old_crtc_state_disables(state, old_crtc_state,
+ new_crtc_state, crtc);
}
}
--
2.24.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
