On Tue, 2019-12-03 at 10:20 +0200, Jani Nikula wrote:
> On Mon, 02 Dec 2019, José Roberto de Souza <jose.so...@intel.com>
> wrote:
> > Talked with HW team and this is a left over, driver should not
> > program clockgating, dekel firmware will be reponsible for any
> > clockgating programing.
> >
> > v2:
> > Added WARN_ON
> >
> > BSpec issue: 20885
> > BSpec: 49292
> >
> > Cc: Lucas De Marchi <lucas.demar...@intel.com>
> > Cc: Matt Roper <matthew.d.ro...@intel.com>
> > Cc: Jani Nikula <jani.nik...@intel.com>
> > Reviewed-by: Matt Roper <matthew.d.ro...@intel.com>
> > Signed-off-by: José Roberto de Souza <jose.so...@intel.com>
> > ---
> > drivers/gpu/drm/i915/display/intel_ddi.c | 54 +++++++-------------
> > ----
> > 1 file changed, 15 insertions(+), 39 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c
> > b/drivers/gpu/drm/i915/display/intel_ddi.c
> > index a976606d21c7..66052a9f1474 100644
> > --- a/drivers/gpu/drm/i915/display/intel_ddi.c
> > +++ b/drivers/gpu/drm/i915/display/intel_ddi.c
> > @@ -3167,6 +3167,10 @@ icl_phy_set_clock_gating(struct
> > intel_digital_port *dig_port, bool enable)
> > u32 val, bits;
> > int ln;
> >
> > + /* See "PHY Clockgating programming" note */
>
> Where?
BSpec: 49292, PHY Clockgating programming: Display driver should not
program the following bits.
>
> > + if (WARN_ON(INTEL_GEN(dev_priv) >= 12))
> > + return;
> > +
> > if (tc_port == PORT_TC_NONE)
> > return;
> >
> > @@ -3175,39 +3179,26 @@ icl_phy_set_clock_gating(struct
> > intel_digital_port *dig_port, bool enable)
> > MG_DP_MODE_CFG_GAONPWR_GATING;
> >
> > for (ln = 0; ln < 2; ln++) {
> > - if (INTEL_GEN(dev_priv) >= 12) {
> > - I915_WRITE(HIP_INDEX_REG(tc_port),
> > HIP_INDEX_VAL(tc_port, ln));
> > - val = I915_READ(DKL_DP_MODE(tc_port));
> > - } else {
> > - val = I915_READ(MG_DP_MODE(ln, tc_port));
> > - }
> > + val = I915_READ(MG_DP_MODE(ln, tc_port));
> >
> > if (enable)
> > val |= bits;
> > else
> > val &= ~bits;
> >
> > - if (INTEL_GEN(dev_priv) >= 12)
> > - I915_WRITE(DKL_DP_MODE(tc_port), val);
> > - else
> > - I915_WRITE(MG_DP_MODE(ln, tc_port), val);
> > + I915_WRITE(MG_DP_MODE(ln, tc_port), val);
> > }
> >
> > - if (INTEL_GEN(dev_priv) == 11) {
> > - bits = MG_MISC_SUS0_CFG_TR2PWR_GATING |
> > - MG_MISC_SUS0_CFG_CL2PWR_GATING |
> > - MG_MISC_SUS0_CFG_GAONPWR_GATING |
> > - MG_MISC_SUS0_CFG_TRPWR_GATING |
> > - MG_MISC_SUS0_CFG_CL1PWR_GATING |
> > - MG_MISC_SUS0_CFG_DGPWR_GATING;
> > + bits = MG_MISC_SUS0_CFG_TR2PWR_GATING |
> > MG_MISC_SUS0_CFG_CL2PWR_GATING |
> > + MG_MISC_SUS0_CFG_GAONPWR_GATING |
> > MG_MISC_SUS0_CFG_TRPWR_GATING |
> > + MG_MISC_SUS0_CFG_CL1PWR_GATING |
> > MG_MISC_SUS0_CFG_DGPWR_GATING;
> >
> > - val = I915_READ(MG_MISC_SUS0(tc_port));
> > - if (enable)
> > - val |= (bits |
> > MG_MISC_SUS0_SUSCLK_DYNCLKGATE_MODE(3));
> > - else
> > - val &= ~(bits |
> > MG_MISC_SUS0_SUSCLK_DYNCLKGATE_MODE_MASK);
> > - I915_WRITE(MG_MISC_SUS0(tc_port), val);
> > - }
> > + val = I915_READ(MG_MISC_SUS0(tc_port));
> > + if (enable)
> > + val |= (bits | MG_MISC_SUS0_SUSCLK_DYNCLKGATE_MODE(3));
> > + else
> > + val &= ~(bits |
> > MG_MISC_SUS0_SUSCLK_DYNCLKGATE_MODE_MASK);
> > + I915_WRITE(MG_MISC_SUS0(tc_port), val);
> > }
> >
> > static void
> > @@ -3508,12 +3499,6 @@ static void tgl_ddi_pre_enable_dp(struct
> > intel_encoder *encoder,
> > * down this function.
> > */
> >
> > - /*
> > - * 7.d Type C with DP alternate or fixed/legacy/static
> > connection -
> > - * Disable PHY clock gating per Type-C DDI Buffer page
> > - */
> > - icl_phy_set_clock_gating(dig_port, false);
> > -
> > /* 7.e Configure voltage swing and related IO settings */
> > tgl_ddi_vswing_sequence(encoder, crtc_state->port_clock, level,
> > encoder->type);
> > @@ -3565,15 +3550,6 @@ static void tgl_ddi_pre_enable_dp(struct
> > intel_encoder *encoder,
> > if (!is_trans_port_sync_mode(crtc_state))
> > intel_dp_stop_link_train(intel_dp);
> >
> > - /*
> > - * TODO: enable clock gating
> > - *
> > - * It is not written in DP enabling sequence but "PHY
> > Clockgating
> > - * programming" states that clock gating should be enabled
> > after the
> > - * link training but doing so causes all the following
> > trainings to fail
> > - * so not enabling it for now.
> > - */
> > -
> > /* 7.l Configure and enable FEC if needed */
> > intel_ddi_enable_fec(encoder, crtc_state);
> > intel_dsc_enable(encoder, crtc_state);
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
