Commit 9c722e17c1b9 ("drm/i915: Disable pipes in reverse order")
reverted the order that pipes gets disabled because of TGL
master/slave relationship between transcoders in MST mode.

But as stated in a comment in skl_commit_modeset_enables() the
enabling order is not always crescent, possibly causing previously
selected slave transcoder being enabled before master so another
approach will be needed to select a transcoder to master in MST mode.
It will be similar to the approach taken in port sync.

But instead of implement something like
intel_trans_port_sync_modeset_disables() to MST lets simply it and
iterate over all pipes 2 times, the first one disabling any slave and
then disabling everything else.
The MST bits will be added in another patch.

Cc: Manasi Navare <manasi.d.nav...@intel.com>
Cc: Matt Roper <matthew.d.ro...@intel.com>
Cc: Maarten Lankhorst <maarten.lankho...@linux.intel.com>
Cc: Ville Syrjälä <ville.syrj...@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.so...@intel.com>
---
 drivers/gpu/drm/i915/display/intel_display.c | 79 ++++++--------------
 1 file changed, 22 insertions(+), 57 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_display.c 
b/drivers/gpu/drm/i915/display/intel_display.c
index 53dc310a5f6d..1b1fbb6d8acc 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -14443,53 +14443,16 @@ static void intel_old_crtc_state_disables(struct 
intel_atomic_state *state,
                dev_priv->display.initial_watermarks(state, crtc);
 }
 
-static void intel_trans_port_sync_modeset_disables(struct intel_atomic_state 
*state,
-                                                  struct intel_crtc *crtc,
-                                                  struct intel_crtc_state 
*old_crtc_state,
-                                                  struct intel_crtc_state 
*new_crtc_state)
-{
-       struct intel_crtc *slave_crtc = intel_get_slave_crtc(new_crtc_state);
-       struct intel_crtc_state *new_slave_crtc_state =
-               intel_atomic_get_new_crtc_state(state, slave_crtc);
-       struct intel_crtc_state *old_slave_crtc_state =
-               intel_atomic_get_old_crtc_state(state, slave_crtc);
-
-       WARN_ON(!slave_crtc || !new_slave_crtc_state ||
-               !old_slave_crtc_state);
-
-       /* Disable Slave first */
-       intel_pre_plane_update(old_slave_crtc_state, new_slave_crtc_state);
-       if (old_slave_crtc_state->hw.active)
-               intel_old_crtc_state_disables(state,
-                                             old_slave_crtc_state,
-                                             new_slave_crtc_state,
-                                             slave_crtc);
-
-       /* Disable Master */
-       intel_pre_plane_update(old_crtc_state, new_crtc_state);
-       if (old_crtc_state->hw.active)
-               intel_old_crtc_state_disables(state,
-                                             old_crtc_state,
-                                             new_crtc_state,
-                                             crtc);
-}
-
 static void intel_commit_modeset_disables(struct intel_atomic_state *state)
 {
        struct intel_crtc_state *new_crtc_state, *old_crtc_state;
        struct intel_crtc *crtc;
        int i;
 
-       /*
-        * Disable CRTC/pipes in reverse order because some features(MST in
-        * TGL+) requires master and slave relationship between pipes, so it
-        * should always pick the lowest pipe as master as it will be enabled
-        * first and disable in the reverse order so the master will be the
-        * last one to be disabled.
-        */
-       for_each_oldnew_intel_crtc_in_state_reverse(state, crtc, old_crtc_state,
-                                                   new_crtc_state, i) {
-               if (!needs_modeset(new_crtc_state))
+       /* Only disable port sync slaves */
+       for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state,
+                                           new_crtc_state, i) {
+               if (!needs_modeset(new_crtc_state) || !crtc->active)
                        continue;
 
                /* In case of Transcoder port Sync master slave CRTCs can be
@@ -14497,23 +14460,25 @@ static void intel_commit_modeset_disables(struct 
intel_atomic_state *state)
                 * slave CRTCs are disabled first and then master CRTC since
                 * Slave vblanks are masked till Master Vblanks.
                 */
-               if (is_trans_port_sync_mode(new_crtc_state)) {
-                       if (is_trans_port_sync_master(new_crtc_state))
-                               intel_trans_port_sync_modeset_disables(state,
-                                                                      crtc,
-                                                                      
old_crtc_state,
-                                                                      
new_crtc_state);
-                       else
-                               continue;
-               } else {
-                       intel_pre_plane_update(old_crtc_state, new_crtc_state);
+               if (!is_trans_port_sync_mode(new_crtc_state))
+                       continue;
+               if (is_trans_port_sync_master(new_crtc_state))
+                       continue;
 
-                       if (old_crtc_state->hw.active)
-                               intel_old_crtc_state_disables(state,
-                                                             old_crtc_state,
-                                                             new_crtc_state,
-                                                             crtc);
-               }
+               intel_pre_plane_update(old_crtc_state, new_crtc_state);
+               intel_old_crtc_state_disables(state, old_crtc_state,
+                                             new_crtc_state, crtc);
+       }
+
+       /* Disable everything else left on */
+       for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state,
+                                           new_crtc_state, i) {
+               if (!needs_modeset(new_crtc_state) || !crtc->active)
+                       continue;
+
+               intel_pre_plane_update(old_crtc_state, new_crtc_state);
+               intel_old_crtc_state_disables(state, old_crtc_state,
+                                             new_crtc_state, crtc);
        }
 }
 
-- 
2.24.0

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Reply via email to