Now this was broken in pretty fundamental ways:
- M1/M2 have been consistently off by 2 and used doc values instead of
the two less registers values our code expects.
- M/N limits often were too small by seemingly arbitrary amounts. I
suspect this started to work around issues due to the wrong M1/M2
limits.
Rectify this all and consolidate the limits a bit with a #define where
the docs say that they should be equal.
Signed-off-by: Daniel Vetter <daniel.vet...@ffwll.ch>
---
drivers/gpu/drm/i915/intel_display.c | 36 +++++++++++-------------------------
1 file changed, 11 insertions(+), 25 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_display.c
b/drivers/gpu/drm/i915/intel_display.c
index 520e340..80698ac 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -217,18 +217,16 @@ static const intel_limit_t intel_limits_pineview_lvds = {
.p2_slow = 14, .p2_fast = 14 },
};
-/* Ironlake / Sandybridge
- *
- * We calculate clock using (register_value + 2) for N/M1/M2, so here
- * the range value for them is (actual_value - 2).
- */
+#define ILK_DPLL_M_N_LIMITS \
+ .n = { .min = 1, .max = 6 }, \
+ .m = { .min = 79, .max = 127 }, \
+ .m1 = { .min = 10, .max = 20 }, \
+ .m2 = { .min = 3, .max = 7 }, \
+
static const intel_limit_t intel_limits_ironlake_dac = {
.dot = { .min = 25000, .max = 350000 },
.vco = { .min = 1760000, .max = 3510000 },
- .n = { .min = 1, .max = 5 },
- .m = { .min = 79, .max = 127 },
- .m1 = { .min = 12, .max = 22 },
- .m2 = { .min = 5, .max = 9 },
+ ILK_DPLL_M_N_LIMITS
.p = { .min = 5, .max = 80 },
.p1 = { .min = 1, .max = 8 },
.p2 = { .dot_limit = 225000,
@@ -238,10 +236,7 @@ static const intel_limit_t intel_limits_ironlake_dac = {
static const intel_limit_t intel_limits_ironlake_single_lvds = {
.dot = { .min = 25000, .max = 350000 },
.vco = { .min = 1760000, .max = 3510000 },
- .n = { .min = 1, .max = 3 },
- .m = { .min = 79, .max = 118 },
- .m1 = { .min = 12, .max = 22 },
- .m2 = { .min = 5, .max = 9 },
+ ILK_DPLL_M_N_LIMITS
.p = { .min = 28, .max = 112 },
.p1 = { .min = 2, .max = 8 },
.p2 = { .dot_limit = 225000,
@@ -251,10 +246,7 @@ static const intel_limit_t
intel_limits_ironlake_single_lvds = {
static const intel_limit_t intel_limits_ironlake_dual_lvds = {
.dot = { .min = 25000, .max = 350000 },
.vco = { .min = 1760000, .max = 3510000 },
- .n = { .min = 1, .max = 3 },
- .m = { .min = 79, .max = 127 },
- .m1 = { .min = 12, .max = 22 },
- .m2 = { .min = 5, .max = 9 },
+ ILK_DPLL_M_N_LIMITS
.p = { .min = 14, .max = 56 },
.p1 = { .min = 2, .max = 8 },
.p2 = { .dot_limit = 225000,
@@ -265,10 +257,7 @@ static const intel_limit_t intel_limits_ironlake_dual_lvds
= {
static const intel_limit_t intel_limits_ironlake_single_lvds_100m = {
.dot = { .min = 25000, .max = 350000 },
.vco = { .min = 1760000, .max = 3510000 },
- .n = { .min = 1, .max = 2 },
- .m = { .min = 79, .max = 126 },
- .m1 = { .min = 12, .max = 22 },
- .m2 = { .min = 5, .max = 9 },
+ ILK_DPLL_M_N_LIMITS
.p = { .min = 28, .max = 112 },
.p1 = { .min = 2, .max = 8 },
.p2 = { .dot_limit = 225000,
@@ -278,10 +267,7 @@ static const intel_limit_t
intel_limits_ironlake_single_lvds_100m = {
static const intel_limit_t intel_limits_ironlake_dual_lvds_100m = {
.dot = { .min = 25000, .max = 350000 },
.vco = { .min = 1760000, .max = 3510000 },
- .n = { .min = 1, .max = 3 },
- .m = { .min = 79, .max = 126 },
- .m1 = { .min = 12, .max = 22 },
- .m2 = { .min = 5, .max = 9 },
+ ILK_DPLL_M_N_LIMITS
.p = { .min = 14, .max = 42 },
.p1 = { .min = 2, .max = 6 },
.p2 = { .dot_limit = 225000,
--
1.7.11.7
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
