On 05/13/2013 01:55 PM, Wang, Xingchao wrote:
Hi David,
-----Original Message-----
From: alsa-devel-boun...@alsa-project.org
[mailto:alsa-devel-boun...@alsa-project.org] On Behalf Of David Henningsson
Sent: Monday, May 13, 2013 4:29 PM
To: Wang Xingchao
Cc: alsa-de...@alsa-project.org; dan...@ffwll.ch; ti...@suse.de; Lin,
Mengdong; intel-gfx@lists.freedesktop.org; Li, Jocelyn; Barnes, Jesse;
Girdwood, Liam R; Zanoni, Paulo R
Subject: Re: [alsa-devel] [PATCH 5/5] ALSA/i915: Check power well API
existense before calling
On 05/13/2013 09:37 AM, Wang Xingchao wrote:
I915 module maybe loaded after snd_hda_intel, the power-well API
doesnot exist in such case. This patch intended to avoid loading
dependency between snd-hda-intel and i915 module.
Hi Xingchao and thanks for working on this.
This patch seems to re-do some of the work done in other patches (a lot of lines
removed), so it's a little hard to follow. But I'll try to write some overall
comments on how I have envisioned things...
1. I don't think there's any need to create an additional kernel module, we can
just let hda_i915.c be in the snd-hda-intel.ko module, and only compile it if
DRM_I915 is defined.
2. We don't need an IS_HSW macro on the audio side. Instead declare a new
AZX_DCAPS_NEED_I915_POWER (or similar) driver quirk.
3. Somewhere in the beginning of the probing in hda_intel.c, we'll need
something like:
if (driver_caps & AZX_DCAPS_NEED_I915_POWER)
hda_i915_init(chip);
4. The hda_i915_init does not need to be exported (they're now both in the
same module). hda_i915.h could have something like:
#ifdef DRM_I915
void hda_i915_init(chip);
#else
#define hda_i915_init(chip) do {} while(0) #endif
Or perhaps even better
static inline void hda_i915_init(azx *chip) {}
Thanks your suggestions. Will change them in next version.
5. You're saying this patch is about avoid loading dependency between
snd-hda-intel and i915 module. That does not make sense to me, since the
powerwell API is in the i915 module, snd-hda-intel must load it when it wants to
enable power on haswell, right? Thus there is a loading dependency. If the i915
module is not loaded at that point, we must wait for it to load, so we can have
proper power, instead of continuing probing without the power well?
If i915 module not loaded, snd-had-intel will load it in current code.
The question is the tolerant delay of waiting for i915 loading.
Could you explain in more detail, what you mean with "tolerant delay"
and what will happen if you exceed that delay?
Continuing probing would immediately fail.
Isn't that what's happening with your current patch set, if
snd-hda-intel is loaded first?
In azx_probe, hda_i915_init won't get the symbols, because
request_module is nowait. Then hda_display_power(true) won't enable
power, because there are no symbols.
Probing audio controller will then continue without power well, which is
bad?
--
David Henningsson, Canonical Ltd.
https://launchpad.net/~diwic
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
