On Tue, 22 Oct 2019, Daniel Vetter <dan...@ffwll.ch> wrote:
> On Tue, Oct 22, 2019 at 03:29:44PM +0530, Shashank Sharma wrote:
>> This patch adds a scaling filter mode porperty
>> to allow:
>> - A driver/HW to showcase it's scaling filter capabilities.
>> - A userspace to pick a desired effect while scaling.
>> 
>> This option will be particularly useful in the scenarios where
>> Integer mode scaling is possible, and a UI client wants to pick
>> filters like Nearest-neighbor applied for non-blurry outputs.
>> 
>> There was a RFC patch series published, to discus the request to enable
>> Integer mode scaling by some of the gaming communities, which can be
>> found here:
>> https://patchwork.freedesktop.org/series/66175/
>> 
>> Signed-off-by: Shashank Sharma <shashank.sha...@intel.com>
>
> Two things:
>
> - needs real property docs for this in the kms property chapter
> - would be good if we could somehow subsume the panel fitter prop into
>   this? Or at least document possible interactions with that.
>
> Plus userspace ofc, recommended best practices is to add a Link: tag
> pointing at the userspace patch series/merge request directly to the patch
> that adds the new uapi.

I think Link: should only be used for referencing the patch that became
the commit?

References: perhaps?

>
> Cheers, Daniel
>> ---
>>  drivers/gpu/drm/drm_atomic_uapi.c |  4 ++++
>>  include/drm/drm_crtc.h            | 26 ++++++++++++++++++++++++++
>>  include/drm/drm_mode_config.h     |  6 ++++++
>>  3 files changed, 36 insertions(+)
>> 
>> diff --git a/drivers/gpu/drm/drm_atomic_uapi.c 
>> b/drivers/gpu/drm/drm_atomic_uapi.c
>> index 0d466d3b0809..883329453a86 100644
>> --- a/drivers/gpu/drm/drm_atomic_uapi.c
>> +++ b/drivers/gpu/drm/drm_atomic_uapi.c
>> @@ -435,6 +435,8 @@ static int drm_atomic_crtc_set_property(struct drm_crtc 
>> *crtc,
>>              return ret;
>>      } else if (property == config->prop_vrr_enabled) {
>>              state->vrr_enabled = val;
>> +    } else if (property == config->scaling_filter_property) {
>> +            state->scaling_filter = val;
>>      } else if (property == config->degamma_lut_property) {
>>              ret = drm_atomic_replace_property_blob_from_id(dev,
>>                                      &state->degamma_lut,
>> @@ -503,6 +505,8 @@ drm_atomic_crtc_get_property(struct drm_crtc *crtc,
>>              *val = (state->gamma_lut) ? state->gamma_lut->base.id : 0;
>>      else if (property == config->prop_out_fence_ptr)
>>              *val = 0;
>> +    else if (property == config->scaling_filter_property)
>> +            *val = state->scaling_filter;
>>      else if (crtc->funcs->atomic_get_property)
>>              return crtc->funcs->atomic_get_property(crtc, state, property, 
>> val);
>>      else
>> diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
>> index 5e9b15a0e8c5..94c5509474a8 100644
>> --- a/include/drm/drm_crtc.h
>> +++ b/include/drm/drm_crtc.h
>> @@ -58,6 +58,25 @@ struct device_node;
>>  struct dma_fence;
>>  struct edid;
>>  
>> +enum drm_scaling_filters {
>> +    DRM_SCALING_FILTER_DEFAULT,
>> +    DRM_SCALING_FILTER_MEDIUM,
>> +    DRM_SCALING_FILTER_BILINEAR,
>> +    DRM_SCALING_FILTER_NN,
>> +    DRM_SCALING_FILTER_NN_IS_ONLY,
>> +    DRM_SCALING_FILTER_EDGE_ENHANCE,
>> +    DRM_SCALING_FILTER_INVALID,
>> +};
>> +
>> +static const struct drm_prop_enum_list drm_scaling_filter_enum_list[] = {
>> +    { DRM_SCALING_FILTER_DEFAULT, "Default" },
>> +    { DRM_SCALING_FILTER_MEDIUM, "Medium" },
>> +    { DRM_SCALING_FILTER_BILINEAR, "Bilinear" },
>> +    { DRM_SCALING_FILTER_NN, "Nearest Neighbor" },
>> +    { DRM_SCALING_FILTER_NN_IS_ONLY, "Integer Mode Scaling" },
>> +    { DRM_SCALING_FILTER_INVALID, "Invalid" },
>> +};
>> +
>>  static inline int64_t U642I64(uint64_t val)
>>  {
>>      return (int64_t)*((int64_t *)&val);
>> @@ -283,6 +302,13 @@ struct drm_crtc_state {
>>       */
>>      u32 target_vblank;
>>  
>> +    /**
>> +     * @scaling_filter:
>> +     *
>> +     * Scaling filter mode to be applied
>> +     */
>> +    u32 scaling_filter;
>> +
>>      /**
>>       * @async_flip:
>>       *
>> diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h
>> index 3bcbe30339f0..efd6fd55770f 100644
>> --- a/include/drm/drm_mode_config.h
>> +++ b/include/drm/drm_mode_config.h
>> @@ -914,6 +914,12 @@ struct drm_mode_config {
>>       */
>>      struct drm_property *modifiers_property;
>>  
>> +    /**
>> +     * @scaling_filter_property: CRTC property to apply a particular filter
>> +     * while scaling in panel fitter mode.
>> +     */
>> +    struct drm_property *scaling_filter_property;
>> +
>>      /* cursor size */
>>      uint32_t cursor_width, cursor_height;
>>  
>> -- 
>> 2.17.1
>> 
>> _______________________________________________
>> Intel-gfx mailing list
>> Intel-gfx@lists.freedesktop.org
>> https://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Jani Nikula, Intel Open Source Graphics Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Reply via email to