is_pch_edp() will be removed in a follow-up patch, so replace it
with a check for the port and VBT info (for port-D eDP).

Also make things a bit clearer by using a switch on the ports.

Signed-off-by: Imre Deak <imre.d...@intel.com>
---
 drivers/gpu/drm/i915/intel_dp.c |   32 +++++++++++++++++++++-----------
 1 file changed, 21 insertions(+), 11 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index d5a3717..31c6129 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -3010,24 +3010,34 @@ intel_dp_init_connector(struct intel_digital_port 
*intel_dig_port,
                if (intel_dpd_is_edp(dev))
                        intel_dp->is_pch_edp = true;
 
+       type = DRM_MODE_CONNECTOR_DisplayPort;
        /*
         * FIXME : We need to initialize built-in panels before external panels.
         * For X0, DP_C is fixed as eDP. Revisit this as part of VLV eDP cleanup
         */
-       if (IS_VALLEYVIEW(dev) && port == PORT_C) {
-               type = DRM_MODE_CONNECTOR_eDP;
-               intel_encoder->type = INTEL_OUTPUT_EDP;
-       } else if (port == PORT_A || is_pch_edp(intel_dp)) {
+       switch (port) {
+       case PORT_A:
                type = DRM_MODE_CONNECTOR_eDP;
-               intel_encoder->type = INTEL_OUTPUT_EDP;
-       } else {
-               /* The intel_encoder->type value may be INTEL_OUTPUT_UNKNOWN for
-                * DDI or INTEL_OUTPUT_DISPLAYPORT for the older gens, so don't
-                * rewrite it.
-                */
-               type = DRM_MODE_CONNECTOR_DisplayPort;
+               break;
+       case PORT_C:
+               if (IS_VALLEYVIEW(dev))
+                       type = DRM_MODE_CONNECTOR_eDP;
+               break;
+       case PORT_D:
+               if (HAS_PCH_SPLIT(dev) && intel_dpd_is_edp(dev))
+                       type = DRM_MODE_CONNECTOR_eDP;
+               break;
+       default:        /* silence GCC warning */
+               break;
        }
 
+       /* The intel_encoder->type value may be INTEL_OUTPUT_UNKNOWN for
+        * DDI or INTEL_OUTPUT_DISPLAYPORT for the older gens, so don't
+        * rewrite it.
+        */
+       if (type == DRM_MODE_CONNECTOR_eDP)
+               intel_encoder->type = INTEL_OUTPUT_EDP;
+
        drm_connector_init(dev, connector, &intel_dp_connector_funcs, type);
        drm_connector_helper_add(connector, &intel_dp_connector_helper_funcs);
 
-- 
1.7.10.4

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

Reply via email to