On Fri, Oct 04, 2019 at 01:35:04PM +0200, Maarten Lankhorst wrote:
> Small changes to intel_dp_mode_valid(), allow listing modes that
> can only be supported in the bigjoiner configuration, which is
> not supported yet.
>
> eDP does not support bigjoiner, so do not expose bigjoiner only
> modes on the eDP port.
>
> Changes since v1:
> - Disallow bigjoiner on eDP.
>
> Signed-off-by: Maarten Lankhorst <maarten.lankho...@linux.intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_dp.c | 92 +++++++++++++++++++------
> 1 file changed, 72 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c
> b/drivers/gpu/drm/i915/display/intel_dp.c
> index 4297738655c6..5c7323af08b3 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -244,7 +244,7 @@ intel_dp_max_data_rate(int max_link_clock, int max_lanes)
> }
>
> static int
> -intel_dp_downstream_max_dotclock(struct intel_dp *intel_dp)
> +intel_dp_downstream_max_dotclock(struct intel_dp *intel_dp, bool
> allow_bigjoiner)
> {
> struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
> struct intel_encoder *encoder = &intel_dig_port->base;
> @@ -254,6 +254,9 @@ intel_dp_downstream_max_dotclock(struct intel_dp
> *intel_dp)
>
> int type = intel_dp->downstream_ports[0] & DP_DS_PORT_TYPE_MASK;
>
> + if (allow_bigjoiner && INTEL_GEN(dev_priv) >= 11)
> + max_dotclk *= 2;
> +
This code is now rather confusing. OK, this function is already misnamed
because it checks both the source and downstream dotclock limits.
I suspect this should all look a bit more like:
source_max_dotclock()
{
if (port_can_do_bigjoiner && dsc_supported)
return 2*max_dotclock;
else
return max_dotclock;
}
max_dotclock = source_max_dotclock();
ds_max_dotclock = ds_max_dotclock()
if (ds_max_dotclock)
max_dotclock = min(max_dotclock, ds_max_dotclock);
> if (type != DP_DS_PORT_TYPE_VGA)
> return max_dotclk;
>
> @@ -506,7 +509,8 @@ small_joiner_ram_size_bits(struct drm_i915_private *i915)
>
> static u16 intel_dp_dsc_get_output_bpp(struct drm_i915_private *i915,
> u32 link_clock, u32 lane_count,
> - u32 mode_clock, u32 mode_hdisplay)
> + u32 mode_clock, u32 mode_hdisplay,
> + bool bigjoiner)
> {
> u32 bits_per_pixel, max_bpp_small_joiner_ram;
> int i;
> @@ -524,6 +528,10 @@ static u16 intel_dp_dsc_get_output_bpp(struct
> drm_i915_private *i915,
> /* Small Joiner Check: output bpp <= joiner RAM (bits) / Horiz. width */
> max_bpp_small_joiner_ram = small_joiner_ram_size_bits(i915) /
> mode_hdisplay;
> +
> + if (bigjoiner)
> + max_bpp_small_joiner_ram *= 2;
> +
> DRM_DEBUG_KMS("Max small joiner bpp: %u\n", max_bpp_small_joiner_ram);
>
> /*
> @@ -532,6 +540,15 @@ static u16 intel_dp_dsc_get_output_bpp(struct
> drm_i915_private *i915,
> */
> bits_per_pixel = min(bits_per_pixel, max_bpp_small_joiner_ram);
>
> + if (bigjoiner) {
> + u32 max_bpp_bigjoiner =
> + i915->max_cdclk_freq * 48 /
> + intel_dp_mode_to_fec_clock(mode_clock);
> +
> + DRM_DEBUG_KMS("Max big joiner bpp: %u\n", max_bpp_bigjoiner);
> + bits_per_pixel = min(bits_per_pixel, max_bpp_bigjoiner);
> + }
> +
> /* Error out if the max bpp is less than smallest allowed valid bpp */
> if (bits_per_pixel < valid_dsc_bpp[0]) {
> DRM_DEBUG_KMS("Unsupported BPP %u, min %u\n",
> @@ -554,7 +571,8 @@ static u16 intel_dp_dsc_get_output_bpp(struct
> drm_i915_private *i915,
> }
>
> static u8 intel_dp_dsc_get_slice_count(struct intel_dp *intel_dp,
> - int mode_clock, int mode_hdisplay)
> + int mode_clock, int mode_hdisplay,
> + bool bigjoiner)
> {
> u8 min_slice_count, i;
> int max_slice_width;
> @@ -579,12 +597,20 @@ static u8 intel_dp_dsc_get_slice_count(struct intel_dp
> *intel_dp,
>
> /* Find the closest match to the valid slice count values */
> for (i = 0; i < ARRAY_SIZE(valid_dsc_slicecount); i++) {
> - if (valid_dsc_slicecount[i] >
> - drm_dp_dsc_sink_max_slice_count(intel_dp->dsc_dpcd,
> - false))
> + u8 test_slice_count = bigjoiner ?
> + 2 * valid_dsc_slicecount[i] :
> + valid_dsc_slicecount[i];
> +
> + if (test_slice_count >
> + drm_dp_dsc_sink_max_slice_count(intel_dp->dsc_dpcd, false))
> break;
> - if (min_slice_count <= valid_dsc_slicecount[i])
> - return valid_dsc_slicecount[i];
> +
> + /* big joiner needs small joiner to be enabled */
> + if (bigjoiner && test_slice_count < 4)
> + continue;
> +
> + if (min_slice_count <= test_slice_count)
> + return test_slice_count;
> }
>
> DRM_DEBUG_KMS("Unsupported Slice Count %d\n", min_slice_count);
> @@ -604,11 +630,15 @@ intel_dp_mode_valid(struct drm_connector *connector,
> int max_dotclk;
> u16 dsc_max_output_bpp = 0;
> u8 dsc_slice_count = 0;
> + bool dsc = false, bigjoiner = false;
>
> if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
> return MODE_NO_DBLESCAN;
>
> - max_dotclk = intel_dp_downstream_max_dotclock(intel_dp);
> + if (mode->flags & DRM_MODE_FLAG_DBLCLK)
> + return MODE_H_ILLEGAL;
> +
> + max_dotclk = intel_dp_downstream_max_dotclock(intel_dp, false);
>
> if (intel_dp_is_edp(intel_dp) && fixed_mode) {
> if (mode->hdisplay > fixed_mode->hdisplay)
> @@ -620,6 +650,21 @@ intel_dp_mode_valid(struct drm_connector *connector,
> target_clock = fixed_mode->clock;
> }
>
> + if (mode->clock < 10000)
> + return MODE_CLOCK_LOW;
> +
> + if (target_clock > max_dotclk) {
> + if (intel_dp_is_edp(intel_dp))
> + return MODE_CLOCK_HIGH;
> +
> + max_dotclk = intel_dp_downstream_max_dotclock(intel_dp, true);
> +
> + if (target_clock > max_dotclk)
> + return MODE_CLOCK_HIGH;
> +
> + bigjoiner = true;
> + }
> +
> max_link_clock = intel_dp_max_link_rate(intel_dp);
> max_lanes = intel_dp_max_lane_count(intel_dp);
>
> @@ -644,23 +689,28 @@ intel_dp_mode_valid(struct drm_connector *connector,
> max_link_clock,
> max_lanes,
> target_clock,
> - mode->hdisplay) >>
> 4;
> + mode->hdisplay,
> + bigjoiner) >> 4;
> dsc_slice_count =
> intel_dp_dsc_get_slice_count(intel_dp,
> target_clock,
> - mode->hdisplay);
> + mode->hdisplay,
> + bigjoiner);
> }
> +
> + dsc = dsc_max_output_bpp && dsc_slice_count;
> }
>
> - if ((mode_rate > max_rate && !(dsc_max_output_bpp && dsc_slice_count))
> ||
> - target_clock > max_dotclk)
> + /* big joiner configuration needs DSC */
> + if (bigjoiner && !dsc) {
> + DRM_DEBUG_KMS("Link clock needs bigjoiner, but DSC or FEC not
> available\n");
> return MODE_CLOCK_HIGH;
> + }
>
> - if (mode->clock < 10000)
> - return MODE_CLOCK_LOW;
> -
> - if (mode->flags & DRM_MODE_FLAG_DBLCLK)
> - return MODE_H_ILLEGAL;
> + if (mode_rate > max_rate && !dsc) {
> + DRM_DEBUG_KMS("Cannot drive without DSC\n");
> + return MODE_CLOCK_HIGH;
> + }
>
> return intel_mode_valid_max_plane_size(dev_priv, mode);
> }
> @@ -2072,11 +2122,13 @@ static int intel_dp_dsc_compute_config(struct
> intel_dp *intel_dp,
> pipe_config->port_clock,
> pipe_config->lane_count,
> adjusted_mode->crtc_clock,
> -
> adjusted_mode->crtc_hdisplay);
> +
> adjusted_mode->crtc_hdisplay,
> + false);
> dsc_dp_slice_count =
> intel_dp_dsc_get_slice_count(intel_dp,
> adjusted_mode->crtc_clock,
> -
> adjusted_mode->crtc_hdisplay);
> +
> adjusted_mode->crtc_hdisplay,
> + false);
> if (!dsc_max_output_bpp || !dsc_dp_slice_count) {
> DRM_DEBUG_KMS("Compressed BPP/Slice Count not
> supported\n");
> return -EINVAL;
> --
> 2.23.0
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
