2013/4/30 Daniel Vetter <daniel.vet...@ffwll.ch>:
> If we ever leak a non-DP compliant port width through here, we have a
> pretty serious issue. So just rip out all these WARNs - if we need
> them it's probably better to have them at a central place where we
> compute the dp lane count.
>
> Also use the new DDI width macro for FDI mode.
>
> Cc: Paulo Zanoni <paulo.r.zan...@intel.com>
> Signed-off-by: Daniel Vetter <daniel.vet...@ffwll.ch>
Nice one.
Reviewed-by: Paulo Zanoni <paulo.r.zan...@intel.com>
> ---
> drivers/gpu/drm/i915/i915_reg.h | 11 ++---------
> drivers/gpu/drm/i915/intel_ddi.c | 34 ++--------------------------------
> drivers/gpu/drm/i915/intel_dp.c | 12 +-----------
> 3 files changed, 5 insertions(+), 52 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 95ae5cf..d84d694 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -2664,9 +2664,7 @@
> #define DP_PRE_EMPHASIS_SHIFT 22
>
> /* How many wires to use. I guess 3 was too hard */
> -#define DP_PORT_WIDTH_1 (0 << 19)
> -#define DP_PORT_WIDTH_2 (1 << 19)
> -#define DP_PORT_WIDTH_4 (3 << 19)
> +#define DP_PORT_WIDTH(width) (((width) - 1) << 19)
> #define DP_PORT_WIDTH_MASK (7 << 19)
>
> /* Mystic DPCD version 1.1 special mode */
> @@ -4751,9 +4749,6 @@
> #define TRANS_DDI_EDP_INPUT_B_ONOFF (5<<12)
> #define TRANS_DDI_EDP_INPUT_C_ONOFF (6<<12)
> #define TRANS_DDI_BFI_ENABLE (1<<4)
> -#define TRANS_DDI_PORT_WIDTH_X1 (0<<1)
> -#define TRANS_DDI_PORT_WIDTH_X2 (1<<1)
> -#define TRANS_DDI_PORT_WIDTH_X4 (3<<1)
>
> /* DisplayPort Transport Control */
> #define DP_TP_CTL_A 0x64040
> @@ -4797,9 +4792,7 @@
> #define DDI_BUF_PORT_REVERSAL (1<<16)
> #define DDI_BUF_IS_IDLE (1<<7)
> #define DDI_A_4_LANES (1<<4)
> -#define DDI_PORT_WIDTH_X1 (0<<1)
> -#define DDI_PORT_WIDTH_X2 (1<<1)
> -#define DDI_PORT_WIDTH_X4 (3<<1)
> +#define DDI_PORT_WIDTH(width) (((width) - 1) << 1)
> #define DDI_INIT_DISPLAY_DETECTED (1<<0)
>
> /* DDI Buffer Translations */
> diff --git a/drivers/gpu/drm/i915/intel_ddi.c
> b/drivers/gpu/drm/i915/intel_ddi.c
> index 72941f9..841c9a9 100644
> --- a/drivers/gpu/drm/i915/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/intel_ddi.c
> @@ -687,22 +687,7 @@ static void intel_ddi_mode_set(struct drm_encoder
> *encoder,
>
> intel_dp->DP = intel_dig_port->port_reversal |
> DDI_BUF_CTL_ENABLE | DDI_BUF_EMP_400MV_0DB_HSW;
> - switch (intel_dp->lane_count) {
> - case 1:
> - intel_dp->DP |= DDI_PORT_WIDTH_X1;
> - break;
> - case 2:
> - intel_dp->DP |= DDI_PORT_WIDTH_X2;
> - break;
> - case 4:
> - intel_dp->DP |= DDI_PORT_WIDTH_X4;
> - break;
> - default:
> - intel_dp->DP |= DDI_PORT_WIDTH_X4;
> - WARN(1, "Unexpected DP lane count %d\n",
> - intel_dp->lane_count);
> - break;
> - }
> + intel_dp->DP |= DDI_PORT_WIDTH(intel_dp->lane_count);
>
> if (intel_dp->has_audio) {
> DRM_DEBUG_DRIVER("DP audio on pipe %c on DDI\n",
> @@ -1031,22 +1016,7 @@ void intel_ddi_enable_transcoder_func(struct drm_crtc
> *crtc)
>
> temp |= TRANS_DDI_MODE_SELECT_DP_SST;
>
> - switch (intel_dp->lane_count) {
> - case 1:
> - temp |= TRANS_DDI_PORT_WIDTH_X1;
> - break;
> - case 2:
> - temp |= TRANS_DDI_PORT_WIDTH_X2;
> - break;
> - case 4:
> - temp |= TRANS_DDI_PORT_WIDTH_X4;
> - break;
> - default:
> - temp |= TRANS_DDI_PORT_WIDTH_X4;
> - WARN(1, "Unsupported lane count %d\n",
> - intel_dp->lane_count);
> - }
> -
> + intel_dp->DP |= DDI_PORT_WIDTH(intel_dp->lane_count);
> } else {
> WARN(1, "Invalid encoder type %d for pipe %c\n",
> intel_encoder->type, pipe_name(pipe));
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index 8759fb1..99f798a 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -891,18 +891,8 @@ intel_dp_mode_set(struct drm_encoder *encoder, struct
> drm_display_mode *mode,
>
> /* Handle DP bits in common between all three register formats */
> intel_dp->DP |= DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0;
> + intel_dp->DP |= DP_PORT_WIDTH(intel_dp->lane_count);
>
> - switch (intel_dp->lane_count) {
> - case 1:
> - intel_dp->DP |= DP_PORT_WIDTH_1;
> - break;
> - case 2:
> - intel_dp->DP |= DP_PORT_WIDTH_2;
> - break;
> - case 4:
> - intel_dp->DP |= DP_PORT_WIDTH_4;
> - break;
> - }
> if (intel_dp->has_audio) {
> DRM_DEBUG_DRIVER("Enabling DP audio on pipe %c\n",
> pipe_name(intel_crtc->pipe));
> --
> 1.7.11.7
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Paulo Zanoni
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
