This patch exposes DC3CO counter in i915_dmc_info debugfs.
Which will be useful for DC3CO validation.
DMC firmware is using DMC_DEBUG3 register as DC3CO counter
register on TGL, but as per B.Specs DMC_DEBUG3 is general
purpose register.
Cc: jani.nik...@intel.com
Cc: imre.d...@intel.com
Cc: animesh.ma...@intel.com
Signed-off-by: Anshuman Gupta <anshuman.gu...@intel.com>
---
drivers/gpu/drm/i915/i915_debugfs.c | 9 ++++++++-
drivers/gpu/drm/i915/i915_reg.h | 3 +++
2 files changed, 11 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/i915_debugfs.c
b/drivers/gpu/drm/i915/i915_debugfs.c
index 4d59972e9689..b382b0b9e430 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -2504,9 +2504,16 @@ static int i915_dmc_info(struct seq_file *m, void
*unused)
seq_printf(m, "version: %d.%d\n", CSR_VERSION_MAJOR(csr->version),
CSR_VERSION_MINOR(csr->version));
- if (WARN_ON(INTEL_GEN(dev_priv) > 11))
+ if (WARN_ON(INTEL_GEN(dev_priv) > 12))
goto out;
+ /*
+ * B.Spes specify that DMC_DEBUG3 is general debug register
+ * DMC folks uses this register for DC3CO counter for TGL
+ */
+ if (IS_TIGERLAKE(dev_priv))
+ seq_printf(m, "DC3CO count: %d\n", I915_READ(DMC_DEBUG3));
+
seq_printf(m, "DC3 -> DC5 count: %d\n",
I915_READ(IS_BROXTON(dev_priv) ? BXT_CSR_DC3_DC5_COUNT :
SKL_CSR_DC3_DC5_COUNT));
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index df36d84a7a8d..68e4b78e4a64 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -7265,6 +7265,9 @@ enum {
#define SKL_CSR_DC5_DC6_COUNT _MMIO(0x8002C)
#define BXT_CSR_DC3_DC5_COUNT _MMIO(0x80038)
+/* DMC DEBUG COUNTERS for TGL*/
+#define DMC_DEBUG3 _MMIO(0x101090) /*DC3CO debug counter*/
+
/* interrupts */
#define DE_MASTER_IRQ_CONTROL (1 << 31)
#define DE_SPRITEB_FLIP_DONE (1 << 29)
--
2.21.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
