This patch checks a support of YCBCR420 outputs on an encoder level.
If the input mode is YCBCR420-only mode then it prepares DP as an YCBCR420
output, else it continues with RGB output mode.
It set output_format to INTEL_OUTPUT_FORMAT_YCBCR420 in order to using
a pipe scaler as RGB to YCbCr 4:4:4.
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong....@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankho...@linux.intel.com>
---
drivers/gpu/drm/i915/intel_dp.c | 33 +++++++++++++++++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index e1a051c0fbfe..d0bf2102dfc2 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -2104,6 +2104,31 @@ intel_dp_compute_link_config(struct intel_encoder
*encoder,
return 0;
}
+static bool
+intel_dp_ycbcr420_config(struct drm_connector *connector,
+ struct intel_crtc_state *config)
+{
+ struct intel_crtc *intel_crtc = to_intel_crtc(config->base.crtc);
+
+ if (!connector->ycbcr_420_allowed) {
+ DRM_ERROR("Platform doesn't support YCBCR420 output\n");
+ return false;
+ }
+
+ config->output_format = INTEL_OUTPUT_FORMAT_YCBCR420;
+
+ /* YCBCR 420 output conversion needs a scaler */
+ if (skl_update_scaler_crtc(config)) {
+ DRM_DEBUG_KMS("Scaler allocation for output failed\n");
+ return false;
+ }
+
+ intel_pch_panel_fitting(intel_crtc, config,
+ DRM_MODE_SCALE_FULLSCREEN);
+
+ return true;
+}
+
int
intel_dp_compute_config(struct intel_encoder *encoder,
struct intel_crtc_state *pipe_config,
@@ -2121,6 +2146,7 @@ intel_dp_compute_config(struct intel_encoder *encoder,
bool constant_n = drm_dp_has_quirk(&intel_dp->desc,
DP_DPCD_QUIRK_CONSTANT_N);
int ret;
+ struct drm_connector *connector = conn_state->connector;
if (HAS_PCH_SPLIT(dev_priv) && !HAS_DDI(dev_priv) && port != PORT_A)
pipe_config->has_pch_encoder = true;
@@ -2129,6 +2155,13 @@ intel_dp_compute_config(struct intel_encoder *encoder,
if (lspcon->active)
lspcon_ycbcr420_config(&intel_connector->base, pipe_config);
+ if (drm_mode_is_420_only(&connector->display_info, adjusted_mode)) {
+ if (!intel_dp_ycbcr420_config(connector, pipe_config)) {
+ DRM_ERROR("Can't support YCBCR420 output\n");
+ return false;
+ }
+ }
+
pipe_config->has_drrs = false;
if (IS_G4X(dev_priv) || port == PORT_A)
pipe_config->has_audio = false;
--
2.20.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
