On Wed, Feb 13, 2019 at 11:44:44AM -0800, Clinton Taylor wrote:
>
> On 2/13/19 8:54 AM, Ville Syrjala wrote:
> > From: Ville Syrjälä <ville.syrj...@linux.intel.com>
> >
> > We'll need to poke at the "ignore lines" bit in the skl+
> > watermark registers for a w/a. Include that bit in the wm
> > state.
> >
> > Signed-off-by: Ville Syrjälä <ville.syrj...@linux.intel.com>
> > ---
> > drivers/gpu/drm/i915/i915_drv.h | 1 +
> > drivers/gpu/drm/i915/i915_reg.h | 1 +
> > drivers/gpu/drm/i915/intel_pm.c | 44 +++++++++++++++++++++------------
> > 3 files changed, 30 insertions(+), 16 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/i915_drv.h
> > b/drivers/gpu/drm/i915/i915_drv.h
> > index 17fe942eaafa..5c8d0489a1cd 100644
> > --- a/drivers/gpu/drm/i915/i915_drv.h
> > +++ b/drivers/gpu/drm/i915/i915_drv.h
> > @@ -1126,6 +1126,7 @@ struct skl_wm_level {
> > u16 plane_res_b;
> > u8 plane_res_l;
> > bool plane_en;
> > + bool ignore_lines;
> > };
> >
> > /* Stores plane specific WM parameters */
> > diff --git a/drivers/gpu/drm/i915/i915_reg.h
> > b/drivers/gpu/drm/i915/i915_reg.h
> > index f3f0b53c9e0e..7b3c41e9771f 100644
> > --- a/drivers/gpu/drm/i915/i915_reg.h
> > +++ b/drivers/gpu/drm/i915/i915_reg.h
> > @@ -6032,6 +6032,7 @@ enum {
> > #define _CUR_WM_TRANS_A_0 0x70168
> > #define _CUR_WM_TRANS_B_0 0x71168
> > #define PLANE_WM_EN (1 << 31)
> > +#define PLANE_WM_IGNORE_LINES (1 << 30)
> > #define PLANE_WM_LINES_SHIFT 14
> > #define PLANE_WM_LINES_MASK 0x1f
> > #define PLANE_WM_BLOCKS_MASK 0x7ff /* skl+: 10 bits, icl+ 11 bits */
> > diff --git a/drivers/gpu/drm/i915/intel_pm.c
> > b/drivers/gpu/drm/i915/intel_pm.c
> > index ea492fff6bf8..7dd2ab0ca21b 100644
> > --- a/drivers/gpu/drm/i915/intel_pm.c
> > +++ b/drivers/gpu/drm/i915/intel_pm.c
> > @@ -5056,11 +5056,12 @@ static void skl_write_wm_level(struct
> > drm_i915_private *dev_priv,
> > {
> > u32 val = 0;
> >
> > - if (level->plane_en) {
> > + if (level->plane_en)
> > val |= PLANE_WM_EN;
> > - val |= level->plane_res_b;
> > - val |= level->plane_res_l << PLANE_WM_LINES_SHIFT;
> > - }
> > + if (level->ignore_lines)
> > + val |= PLANE_WM_IGNORE_LINES;
> > + val |= level->plane_res_b;
> > + val |= level->plane_res_l << PLANE_WM_LINES_SHIFT;
>
> Is there a reason to program IGNORE_LINES, plane_res_b, and plane_res_l
> even when PLANE_WM_EN is not set? This is a change to functionality not
> described in the commit message.
Everything will be zero when the wm is disabled, except in
this special case for wm1. Just programming everything always
makes the code less messy.
>
> Since the WM is not enabled anyway:
>
> Reviewed-by: Clint Taylor <clinton.a.tay...@intel.com>
>
> -Clint
>
>
> >
> > I915_WRITE_FW(reg, val);
> > }
> > @@ -5126,6 +5127,7 @@ bool skl_wm_level_equals(const struct skl_wm_level
> > *l1,
> > const struct skl_wm_level *l2)
> > {
> > return l1->plane_en == l2->plane_en &&
> > + l1->ignore_lines == l2->ignore_lines &&
> > l1->plane_res_l == l2->plane_res_l &&
> > l1->plane_res_b == l2->plane_res_b;
> > }
> > @@ -5334,19 +5336,28 @@ skl_print_wm_changes(struct intel_atomic_state
> > *state)
> > enast(new_wm->wm[6].plane_en),
> > enast(new_wm->wm[7].plane_en),
> > enast(new_wm->trans_wm.plane_en));
> >
> > - DRM_DEBUG_KMS("[PLANE:%d:%s] lines
> > %4d,%4d,%4d,%4d,%4d,%4d,%4d,%4d,%4d"
> > - " ->
> > %4d,%4d,%4d,%4d,%4d,%4d,%4d,%4d,%4d\n",
> > + DRM_DEBUG_KMS("[PLANE:%d:%s] lines
> > %c%3d,%c%3d,%c%3d,%c%3d,%c%3d,%c%3d,%c%3d,%c%3d,%c%3d"
> > + " ->
> > %c%3d,%c%3d,%c%3d,%c%3d,%c%3d,%c%3d,%c%3d,%c%3d,%c%3d\n",
> > plane->base.base.id, plane->base.name,
> > - old_wm->wm[0].plane_res_l,
> > old_wm->wm[1].plane_res_l,
> > - old_wm->wm[2].plane_res_l,
> > old_wm->wm[3].plane_res_l,
> > - old_wm->wm[4].plane_res_l,
> > old_wm->wm[5].plane_res_l,
> > - old_wm->wm[6].plane_res_l,
> > old_wm->wm[7].plane_res_l,
> > - old_wm->trans_wm.plane_res_l,
> > - new_wm->wm[0].plane_res_l,
> > new_wm->wm[1].plane_res_l,
> > - new_wm->wm[2].plane_res_l,
> > new_wm->wm[3].plane_res_l,
> > - new_wm->wm[4].plane_res_l,
> > new_wm->wm[5].plane_res_l,
> > - new_wm->wm[6].plane_res_l,
> > new_wm->wm[7].plane_res_l,
> > - new_wm->trans_wm.plane_res_l);
> > + enast(old_wm->wm[0].ignore_lines),
> > old_wm->wm[0].plane_res_l,
> > + enast(old_wm->wm[1].ignore_lines),
> > old_wm->wm[1].plane_res_l,
> > + enast(old_wm->wm[2].ignore_lines),
> > old_wm->wm[2].plane_res_l,
> > + enast(old_wm->wm[3].ignore_lines),
> > old_wm->wm[3].plane_res_l,
> > + enast(old_wm->wm[4].ignore_lines),
> > old_wm->wm[4].plane_res_l,
> > + enast(old_wm->wm[5].ignore_lines),
> > old_wm->wm[5].plane_res_l,
> > + enast(old_wm->wm[6].ignore_lines),
> > old_wm->wm[6].plane_res_l,
> > + enast(old_wm->wm[7].ignore_lines),
> > old_wm->wm[7].plane_res_l,
> > + enast(old_wm->trans_wm.ignore_lines),
> > old_wm->trans_wm.plane_res_l,
> > +
> > + enast(new_wm->wm[0].ignore_lines),
> > new_wm->wm[0].plane_res_l,
> > + enast(new_wm->wm[1].ignore_lines),
> > new_wm->wm[1].plane_res_l,
> > + enast(new_wm->wm[2].ignore_lines),
> > new_wm->wm[2].plane_res_l,
> > + enast(new_wm->wm[3].ignore_lines),
> > new_wm->wm[3].plane_res_l,
> > + enast(new_wm->wm[4].ignore_lines),
> > new_wm->wm[4].plane_res_l,
> > + enast(new_wm->wm[5].ignore_lines),
> > new_wm->wm[5].plane_res_l,
> > + enast(new_wm->wm[6].ignore_lines),
> > new_wm->wm[6].plane_res_l,
> > + enast(new_wm->wm[7].ignore_lines),
> > new_wm->wm[7].plane_res_l,
> > + enast(new_wm->trans_wm.ignore_lines),
> > new_wm->trans_wm.plane_res_l);
> >
> > DRM_DEBUG_KMS("[PLANE:%d:%s] blocks
> > %4d,%4d,%4d,%4d,%4d,%4d,%4d,%4d,%4d"
> > " ->
> > %4d,%4d,%4d,%4d,%4d,%4d,%4d,%4d,%4d\n",
> > @@ -5689,6 +5700,7 @@ static inline void skl_wm_level_from_reg_val(u32 val,
> > struct skl_wm_level *level)
> > {
> > level->plane_en = val & PLANE_WM_EN;
> > + level->ignore_lines = val & PLANE_WM_IGNORE_LINES;
> > level->plane_res_b = val & PLANE_WM_BLOCKS_MASK;
> > level->plane_res_l = (val >> PLANE_WM_LINES_SHIFT) &
> > PLANE_WM_LINES_MASK;
--
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
