>-----Original Message-----
>From: C, Ramalingam
>Sent: Thursday, January 31, 2019 12:30 PM
>To: intel-gfx@lists.freedesktop.org; dri-de...@lists.freedesktop.org;
>daniel.vet...@ffwll.ch; Winkler, Tomas <tomas.wink...@intel.com>; Shankar,
>Uma <uma.shan...@intel.com>
>Cc: C, Ramalingam <ramalinga...@intel.com>
>Subject: [PATCH v10 25/40] misc/mei/hdcp: Initiate Wired HDCP2.2 Tx Session
>
>Request ME FW to start the HDCP2.2 session for an intel port.
>Prepares payloads for command WIRED_INITIATE_HDCP2_SESSION and sends to
>ME FW.
>
>On Success, ME FW will start a HDCP2.2 session for the port and provides the
>content for HDCP2.2 AKE_Init message.
>
>v2: Rebased.
>v3:
>  cldev is add as a separate parameter [Tomas]
>  Redundant comment and typecast are removed [Tomas]
>v4:
>  %zd is used for size [Alexander]
>  %s/return -1/return -EIO [Alexander]
>  Spellings in commit msg is fixed [Uma]
>v5: Rebased.
>v6:
>  Collected the rb-ed by.
>  Realigning the patches in the series.
>v7:
>  Adjust to the new mei interface.
>  Fix for kdoc.
>v8:
>  K-Doc Addition.
>  memcpy for const length.
>
>Signed-off-by: Ramalingam C <ramalinga...@intel.com>
>Reviewed-by: Uma Shankar <uma.shan...@intel.com>

Latest set look ok. You can keep the RB.

>---
> drivers/misc/mei/hdcp/mei_hdcp.c | 82
>++++++++++++++++++++++++++++++++++++++++
> drivers/misc/mei/hdcp/mei_hdcp.h | 28 ++++++++++++++
> 2 files changed, 110 insertions(+)
>
>diff --git a/drivers/misc/mei/hdcp/mei_hdcp.c
>b/drivers/misc/mei/hdcp/mei_hdcp.c
>index ca5010ad7dd7..534d29c8ee86 100644
>--- a/drivers/misc/mei/hdcp/mei_hdcp.c
>+++ b/drivers/misc/mei/hdcp/mei_hdcp.c
>@@ -23,6 +23,88 @@
> #include <linux/slab.h>
> #include <linux/uuid.h>
> #include <linux/mei_cl_bus.h>
>+#include <drm/drm_connector.h>
>+#include <drm/i915_component.h>
>+#include <drm/i915_mei_hdcp_interface.h>
>+
>+#include "mei_hdcp.h"
>+
>+/**
>+ * mei_initiate_hdcp2_session() - Initiate a Wired HDCP2.2 Tx Session
>+in ME FW
>+ * @dev: device corresponding to the mei_cl_device
>+ * @hdcp_data: Intel HW specific hdcp data
>+ * @ake_data: AKE_Init msg output.
>+ *
>+ * Return:  0 on Success, <0 on Failure.
>+ */
>+static int
>+mei_initiate_hdcp2_session(struct device *dev, struct hdcp_port_data *data,
>+                         struct hdcp2_ake_init *ake_data)
>+{
>+      struct wired_cmd_initiate_hdcp2_session_in session_init_in = { { 0 } };
>+      struct wired_cmd_initiate_hdcp2_session_out
>+                                              session_init_out = { { 0 } };
>+      struct mei_cl_device *cldev;
>+      ssize_t byte;
>+
>+      if (!dev || !data || !ake_data)
>+              return -EINVAL;
>+
>+      cldev = to_mei_cl_device(dev);
>+
>+      session_init_in.header.api_version = HDCP_API_VERSION;
>+      session_init_in.header.command_id =
>WIRED_INITIATE_HDCP2_SESSION;
>+      session_init_in.header.status = ME_HDCP_STATUS_SUCCESS;
>+      session_init_in.header.buffer_len =
>+
>       WIRED_CMD_BUF_LEN_INITIATE_HDCP2_SESSION_IN;
>+
>+      session_init_in.port.integrated_port_type = data->port_type;
>+      session_init_in.port.physical_port = (u8)GET_MEI_DDI_INDEX(data-
>>port);
>+      session_init_in.protocol = data->protocol;
>+
>+      byte = mei_cldev_send(cldev, (u8 *)&session_init_in,
>+                            sizeof(session_init_in));
>+      if (byte < 0) {
>+              dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte);
>+              return byte;
>+      }
>+
>+      byte = mei_cldev_recv(cldev, (u8 *)&session_init_out,
>+                            sizeof(session_init_out));
>+      if (byte < 0) {
>+              dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte);
>+              return byte;
>+      }
>+
>+      if (session_init_out.header.status != ME_HDCP_STATUS_SUCCESS) {
>+              dev_dbg(dev, "ME cmd 0x%08X Failed. Status: 0x%X\n",
>+                      WIRED_INITIATE_HDCP2_SESSION,
>+                      session_init_out.header.status);
>+              return -EIO;
>+      }
>+
>+      ake_data->msg_id = HDCP_2_2_AKE_INIT;
>+      ake_data->tx_caps = session_init_out.tx_caps;
>+      memcpy(ake_data->r_tx, session_init_out.r_tx, HDCP_2_2_RTX_LEN);
>+
>+      return 0;
>+}
>+
>+static __attribute__((unused))
>+struct i915_hdcp_component_ops mei_hdcp_ops = {
>+      .owner = THIS_MODULE,
>+      .initiate_hdcp2_session = mei_initiate_hdcp2_session,
>+      .verify_receiver_cert_prepare_km = NULL,
>+      .verify_hprime = NULL,
>+      .store_pairing_info = NULL,
>+      .initiate_locality_check = NULL,
>+      .verify_lprime = NULL,
>+      .get_session_key = NULL,
>+      .repeater_check_flow_prepare_ack = NULL,
>+      .verify_mprime = NULL,
>+      .enable_hdcp_authentication = NULL,
>+      .close_hdcp_session = NULL,
>+};
>
> static int mei_hdcp_probe(struct mei_cl_device *cldev,
>                         const struct mei_cl_device_id *id) diff --git
>a/drivers/misc/mei/hdcp/mei_hdcp.h b/drivers/misc/mei/hdcp/mei_hdcp.h
>index 582a7e27ae29..f831db3cbd54 100644
>--- a/drivers/misc/mei/hdcp/mei_hdcp.h
>+++ b/drivers/misc/mei/hdcp/mei_hdcp.h
>@@ -363,4 +363,32 @@ struct wired_cmd_repeater_auth_stream_req_out {
>       struct hdcp_port_id     port;
> } __packed;
>
>+enum mei_hdcp_ddi {
>+      MEI_DDI_INVALID_PORT = 0x0,
>+
>+      MEI_DDI_B = 1,
>+      MEI_DDI_C,
>+      MEI_DDI_D,
>+      MEI_DDI_E,
>+      MEI_DDI_F,
>+      MEI_DDI_A = 7,
>+      MEI_DDI_RANGE_END = MEI_DDI_A,
>+};
>+
>+enum i915_port {
>+      PORT_NONE = -1,
>+
>+      PORT_A = 0,
>+      PORT_B,
>+      PORT_C,
>+      PORT_D,
>+      PORT_E,
>+      PORT_F,
>+      I915_MAX_PORTS,
>+};
>+
>+#define GET_MEI_DDI_INDEX(p) ({
>       \
>+      enum i915_port __p = (enum i915_port)(p);                       \
>+      __p == PORT_A ? MEI_DDI_A : (enum mei_hdcp_ddi)__p;             \
>+})
> #endif /* __MEI_HDCP_H__ */
>--
>2.7.4

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Reply via email to