On Wed, Jan 30, 2019 at 10:51:22AM -0800, Matt Roper wrote:
> Gen9+ platforms allow CRTC's to be programmed with a background/canvas
> color below the programmable planes. Let's expose this for use by
> compositors.
>
> v2:
> - Split out bgcolor sanitization and programming of csc/gamma bits to a
> separate patch that we can land before the ABI changes are ready to
> go in. (Ville)
> - Change a temporary variable name to be more consistent with
> other similar functions. (Ville)
> - Change register name to SKL_CANVAS for consistency with the
> CHV_CANVAS register.
>
> v3:
> - Switch register name back to SKL_BOTTOM_COLOR. (Ville)
> - Use non-_FW register write. (Ville)
> - Minor parameter rename for consistency. (Ville)
>
> v4:
> - Removed use of bgcolor_changed flag.
>
> Cc: dri-de...@lists.freedesktop.org
> Cc: wei.c...@intel.com
> Cc: harish.krupo....@intel.com
> Cc: Ville Syrjälä <ville.syrj...@linux.intel.com>
> Signed-off-by: Matt Roper <matthew.d.ro...@intel.com>
> ---
> drivers/gpu/drm/i915/i915_debugfs.c | 9 +++++++
> drivers/gpu/drm/i915/intel_display.c | 46
> +++++++++++++++++++++++++++---------
> 2 files changed, 44 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_debugfs.c
> b/drivers/gpu/drm/i915/i915_debugfs.c
> index fa2c226fc779..8b07dd05c54e 100644
> --- a/drivers/gpu/drm/i915/i915_debugfs.c
> +++ b/drivers/gpu/drm/i915/i915_debugfs.c
> @@ -3092,6 +3092,15 @@ static int i915_display_info(struct seq_file *m, void
> *unused)
> intel_plane_info(m, crtc);
> }
>
> + if (INTEL_GEN(dev_priv) >= 9 && pipe_config->base.active) {
> + uint64_t background = pipe_config->base.bgcolor;
> +
> + seq_printf(m, "\tbackground color (10bpc): r=%x g=%x
> b=%x\n",
> + DRM_ARGB_RED(background, 10),
> + DRM_ARGB_GREEN(background, 10),
> + DRM_ARGB_BLUE(background, 10));
> + }
> +
> seq_printf(m, "\tunderrun reporting: cpu=%s pch=%s \n",
> yesno(!crtc->cpu_fifo_underrun_disabled),
> yesno(!crtc->pch_fifo_underrun_disabled));
> diff --git a/drivers/gpu/drm/i915/intel_display.c
> b/drivers/gpu/drm/i915/intel_display.c
> index a025efb1d7c6..bc78743e1411 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -3896,6 +3896,28 @@ void intel_finish_reset(struct drm_i915_private
> *dev_priv)
> clear_bit(I915_RESET_MODESET, &dev_priv->gpu_error.flags);
> }
>
> +static void
> +skl_update_background_color(const struct intel_crtc_state *crtc_state)
> +{
> + struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
> + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
> + uint64_t propval = crtc_state->base.bgcolor;
> + uint32_t tmp;
> +
> + /* Hardware is programmed with 10 bits of precision */
> + tmp = DRM_ARGB_RED(propval, 10) << 20
> + | DRM_ARGB_GREEN(propval, 10) << 10
> + | DRM_ARGB_BLUE(propval, 10);
> +
> + /*
> + * Set CSC and gamma for bottom color to ensure background pixels
> + * receive the same color transformations as plane content.
> + */
> + tmp |= SKL_BOTTOM_COLOR_CSC_ENABLE | SKL_BOTTOM_COLOR_GAMMA_ENABLE;
> +
> + I915_WRITE(SKL_BOTTOM_COLOR(crtc->pipe), tmp);
> +}
Readout + state check would be nice too.
Anyways
Reviewed-by: Ville Syrjälä <ville.syrj...@linux.intel.com>
> +
> static void intel_update_pipe_config(const struct intel_crtc_state
> *old_crtc_state,
> const struct intel_crtc_state
> *new_crtc_state)
> {
> @@ -3931,15 +3953,8 @@ static void intel_update_pipe_config(const struct
> intel_crtc_state *old_crtc_sta
> ironlake_pfit_disable(old_crtc_state);
> }
>
> - /*
> - * We don't (yet) allow userspace to control the pipe background color,
> - * so force it to black, but apply pipe gamma and CSC so that its
> - * handling will match how we program our planes.
> - */
> if (INTEL_GEN(dev_priv) >= 9)
> - I915_WRITE(SKL_BOTTOM_COLOR(crtc->pipe),
> - SKL_BOTTOM_COLOR_GAMMA_ENABLE |
> - SKL_BOTTOM_COLOR_CSC_ENABLE);
> + skl_update_background_color(new_crtc_state);
> }
>
> static void intel_fdi_normal_train(struct intel_crtc *crtc)
> @@ -11042,6 +11057,8 @@ static int intel_crtc_atomic_check(struct drm_crtc
> *crtc,
> struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> struct intel_crtc_state *pipe_config =
> to_intel_crtc_state(crtc_state);
> + struct drm_crtc_state *old_crtc_state =
> + drm_atomic_get_old_crtc_state(crtc_state->state, crtc);
> int ret;
> bool mode_changed = needs_modeset(crtc_state);
>
> @@ -11069,6 +11086,9 @@ static int intel_crtc_atomic_check(struct drm_crtc
> *crtc,
> crtc_state->planes_changed = true;
> }
>
> + if (crtc_state->bgcolor != old_crtc_state->bgcolor)
> + pipe_config->update_pipe = true;
> +
> ret = 0;
> if (dev_priv->display.compute_pipe_wm) {
> ret = dev_priv->display.compute_pipe_wm(pipe_config);
> @@ -14238,6 +14258,9 @@ static int intel_crtc_init(struct drm_i915_private
> *dev_priv, enum pipe pipe)
>
> WARN_ON(drm_crtc_index(&intel_crtc->base) != intel_crtc->pipe);
>
> + if (INTEL_GEN(dev_priv) >= 9)
> + drm_crtc_add_bgcolor_property(&intel_crtc->base);
> +
> return 0;
>
> fail:
> @@ -15478,6 +15501,9 @@ static void intel_sanitize_crtc(struct intel_crtc
> *crtc,
> struct intel_crtc_state *crtc_state =
> to_intel_crtc_state(crtc->base.state);
> enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
>
> + /* Always force bgcolor to solid black */
> + crtc_state->base.bgcolor = drm_argb(16, 0xFFFF, 0, 0, 0);
> +
> /* Clear any frame start delays used for debugging left by the BIOS */
> if (crtc->active && !transcoder_is_dsi(cpu_transcoder)) {
> i915_reg_t reg = PIPECONF(cpu_transcoder);
> @@ -15504,9 +15530,7 @@ static void intel_sanitize_crtc(struct intel_crtc
> *crtc,
> * gamma and CSC to match how we program our planes.
> */
> if (INTEL_GEN(dev_priv) >= 9)
> - I915_WRITE(SKL_BOTTOM_COLOR(crtc->pipe),
> - SKL_BOTTOM_COLOR_GAMMA_ENABLE |
> - SKL_BOTTOM_COLOR_CSC_ENABLE);
> + skl_update_background_color(crtc_state);
> }
>
> /* Adjust the state of the output pipe according to whether we
> --
> 2.14.5
--
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
