On Tue, Dec 11, 2018 at 01:31:12PM -0800, clinton.a.tay...@intel.com wrote:
> From: Clint Taylor <clinton.a.tay...@intel.com>
>
> In August 2018 the BSPEC changed the ICL port programming sequence to
> closely resemble earlier gen programming sequence. Restrict combo phy to
> HBR max rate unless eDP panel is connected to port.
>
> v2: remove debug code that Imre found
> v3: simplify translation table if-else
> v4: edp translation table now based on link rate and low_swing
> BSpec: 21257
> Cc: Ville Syrjälä <ville.syrj...@linux.intel.com>
> Cc: Imre Deak <imre.d...@intel.com>
> Cc: Rodrigo Vivi <rodrigo.v...@intel.com>
> Signed-off-by: Clint Taylor <clinton.a.tay...@intel.com>
> ---
> drivers/gpu/drm/i915/i915_reg.h | 4 +
> drivers/gpu/drm/i915/intel_ddi.c | 240
> ++++++++++++++-------------------------
> drivers/gpu/drm/i915/intel_dp.c | 4 +-
> 3 files changed, 95 insertions(+), 153 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 0a7d605..29acdb9 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -1866,6 +1866,10 @@ enum i915_power_well_id {
>
> #define CNL_PORT_TX_DW7_GRP(port) _MMIO(_CNL_PORT_TX_DW_GRP((port), 7))
> #define CNL_PORT_TX_DW7_LN0(port) _MMIO(_CNL_PORT_TX_DW_LN0((port), 7))
> +#define ICL_PORT_TX_DW7_AUX(port) _MMIO(_ICL_PORT_TX_DW_AUX(7, port))
> +#define ICL_PORT_TX_DW7_GRP(port) _MMIO(_ICL_PORT_TX_DW_GRP(7, port))
> +#define ICL_PORT_TX_DW7_LN0(port) _MMIO(_ICL_PORT_TX_DW_LN(7, 0, port))
> +#define ICL_PORT_TX_DW7_LN(port, ln) _MMIO(_ICL_PORT_TX_DW_LN(7, ln, port))
> #define N_SCALAR(x) ((x) << 24)
> #define N_SCALAR_MASK (0x7F << 24)
>
> diff --git a/drivers/gpu/drm/i915/intel_ddi.c
> b/drivers/gpu/drm/i915/intel_ddi.c
> index f3e1d6a..33bf77b 100644
> --- a/drivers/gpu/drm/i915/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/intel_ddi.c
> @@ -494,103 +494,58 @@ struct cnl_ddi_buf_trans {
> { 0x2, 0x7F, 0x3F, 0x00, 0x00 }, /* 400 400 0.0 */
> };
>
> -struct icl_combo_phy_ddi_buf_trans {
> - u32 dw2_swing_select;
> - u32 dw2_swing_scalar;
> - u32 dw4_scaling;
> -};
> -
> -/* Voltage Swing Programming for VccIO 0.85V for DP */
> -static const struct icl_combo_phy_ddi_buf_trans
> icl_combo_phy_ddi_translations_dp_hdmi_0_85V[] = {
> - /* Voltage mV db */
> - { 0x2, 0x98, 0x0018 }, /* 400 0.0 */
> - { 0x2, 0x98, 0x3015 }, /* 400 3.5 */
> - { 0x2, 0x98, 0x6012 }, /* 400 6.0 */
> - { 0x2, 0x98, 0x900F }, /* 400 9.5 */
> - { 0xB, 0x70, 0x0018 }, /* 600 0.0 */
> - { 0xB, 0x70, 0x3015 }, /* 600 3.5 */
> - { 0xB, 0x70, 0x6012 }, /* 600 6.0 */
> - { 0x5, 0x00, 0x0018 }, /* 800 0.0 */
> - { 0x5, 0x00, 0x3015 }, /* 800 3.5 */
> - { 0x6, 0x98, 0x0018 }, /* 1200 0.0 */
> -};
> -
> -/* FIXME - After table is updated in Bspec */
> -/* Voltage Swing Programming for VccIO 0.85V for eDP */
> -static const struct icl_combo_phy_ddi_buf_trans
> icl_combo_phy_ddi_translations_edp_0_85V[] = {
> - /* Voltage mV db */
> - { 0x0, 0x00, 0x00 }, /* 200 0.0 */
> - { 0x0, 0x00, 0x00 }, /* 200 1.5 */
> - { 0x0, 0x00, 0x00 }, /* 200 4.0 */
> - { 0x0, 0x00, 0x00 }, /* 200 6.0 */
> - { 0x0, 0x00, 0x00 }, /* 250 0.0 */
> - { 0x0, 0x00, 0x00 }, /* 250 1.5 */
> - { 0x0, 0x00, 0x00 }, /* 250 4.0 */
> - { 0x0, 0x00, 0x00 }, /* 300 0.0 */
> - { 0x0, 0x00, 0x00 }, /* 300 1.5 */
> - { 0x0, 0x00, 0x00 }, /* 350 0.0 */
> -};
> -
> -/* Voltage Swing Programming for VccIO 0.95V for DP */
> -static const struct icl_combo_phy_ddi_buf_trans
> icl_combo_phy_ddi_translations_dp_hdmi_0_95V[] = {
> - /* Voltage mV db */
> - { 0x2, 0x98, 0x0018 }, /* 400 0.0 */
> - { 0x2, 0x98, 0x3015 }, /* 400 3.5 */
> - { 0x2, 0x98, 0x6012 }, /* 400 6.0 */
> - { 0x2, 0x98, 0x900F }, /* 400 9.5 */
> - { 0x4, 0x98, 0x0018 }, /* 600 0.0 */
> - { 0x4, 0x98, 0x3015 }, /* 600 3.5 */
> - { 0x4, 0x98, 0x6012 }, /* 600 6.0 */
> - { 0x5, 0x76, 0x0018 }, /* 800 0.0 */
> - { 0x5, 0x76, 0x3015 }, /* 800 3.5 */
> - { 0x6, 0x98, 0x0018 }, /* 1200 0.0 */
> +/* icl_combo_phy_ddi_translations */
> +static const struct cnl_ddi_buf_trans
> icl_combo_phy_ddi_translations_dp_hbr2[] = {
> + /* NT mV Trans mV db */
> + { 0xA, 0x35, 0x3F, 0x00, 0x00 }, /* 350 350 0.0 */
> + { 0xA, 0x4F, 0x37, 0x00, 0x08 }, /* 350 500 3.1 */
> + { 0xC, 0x71, 0x2F, 0x00, 0x10 }, /* 350 700 6.0 */
> + { 0x6, 0x7F, 0x2B, 0x00, 0x14 }, /* 350 900 8.2 */
> + { 0xA, 0x4C, 0x3F, 0x00, 0x00 }, /* 500 500 0.0 */
> + { 0xC, 0x73, 0x34, 0x00, 0x0B }, /* 500 700 2.9 */
> + { 0x6, 0x7F, 0x2F, 0x00, 0x10 }, /* 500 900 5.1 */
> + { 0xC, 0x6C, 0x3C, 0x00, 0x03 }, /* 650 705 0.6 */
you missed my comment for the previous version ^700
> + { 0x6, 0x7F, 0x35, 0x00, 0x0A }, /* 600 900 3.5 */
> + { 0x6, 0x7F, 0x3F, 0x00, 0x00 }, /* 900 900 0.0 */
> };
>
> -/* FIXME - After table is updated in Bspec */
> -/* Voltage Swing Programming for VccIO 0.95V for eDP */
> -static const struct icl_combo_phy_ddi_buf_trans
> icl_combo_phy_ddi_translations_edp_0_95V[] = {
> - /* Voltage mV db */
> - { 0x0, 0x00, 0x00 }, /* 200 0.0 */
> - { 0x0, 0x00, 0x00 }, /* 200 1.5 */
> - { 0x0, 0x00, 0x00 }, /* 200 4.0 */
> - { 0x0, 0x00, 0x00 }, /* 200 6.0 */
> - { 0x0, 0x00, 0x00 }, /* 250 0.0 */
> - { 0x0, 0x00, 0x00 }, /* 250 1.5 */
> - { 0x0, 0x00, 0x00 }, /* 250 4.0 */
> - { 0x0, 0x00, 0x00 }, /* 300 0.0 */
> - { 0x0, 0x00, 0x00 }, /* 300 1.5 */
> - { 0x0, 0x00, 0x00 }, /* 350 0.0 */
> +static const struct cnl_ddi_buf_trans
> icl_combo_phy_ddi_translations_edp_hbr2[] = {
> + /* NT mV Trans mV db */
> + { 0x0, 0x7F, 0x3F, 0x00, 0x00 }, /* 200 200 0.0 */
> + { 0x8, 0x7F, 0x38, 0x00, 0x07 }, /* 200 250 1.9 */
> + { 0x1, 0x7F, 0x33, 0x00, 0x0C }, /* 200 300 3.5 */
> + { 0x9, 0x7F, 0x31, 0x00, 0x0E }, /* 200 350 4.9 */
> + { 0x8, 0x7F, 0x3F, 0x00, 0x00 }, /* 250 250 0.0 */
> + { 0x1, 0x7F, 0x38, 0x00, 0x07 }, /* 250 300 1.6 */
> + { 0x9, 0x7F, 0x35, 0x00, 0x0A }, /* 250 350 2.9 */
> + { 0x1, 0x7F, 0x3F, 0x00, 0x00 }, /* 300 300 0.0 */
> + { 0x9, 0x7F, 0x38, 0x00, 0x07 }, /* 300 350 1.3 */
> + { 0x9, 0x7F, 0x3F, 0x00, 0x00 }, /* 350 350 0.0 */
> };
>
> -/* Voltage Swing Programming for VccIO 1.05V for DP */
> -static const struct icl_combo_phy_ddi_buf_trans
> icl_combo_phy_ddi_translations_dp_hdmi_1_05V[] = {
> - /* Voltage mV db */
> - { 0x2, 0x98, 0x0018 }, /* 400 0.0 */
> - { 0x2, 0x98, 0x3015 }, /* 400 3.5 */
> - { 0x2, 0x98, 0x6012 }, /* 400 6.0 */
> - { 0x2, 0x98, 0x900F }, /* 400 9.5 */
> - { 0x4, 0x98, 0x0018 }, /* 600 0.0 */
> - { 0x4, 0x98, 0x3015 }, /* 600 3.5 */
> - { 0x4, 0x98, 0x6012 }, /* 600 6.0 */
> - { 0x5, 0x71, 0x0018 }, /* 800 0.0 */
> - { 0x5, 0x71, 0x3015 }, /* 800 3.5 */
> - { 0x6, 0x98, 0x0018 }, /* 1200 0.0 */
> +static const struct cnl_ddi_buf_trans
> icl_combo_phy_ddi_translations_edp_hbr3[] = {
> + /* NT mV Trans mV db */
> + { 0xA, 0x35, 0x3F, 0x00, 0x00 }, /* 350 350 0.0 */
> + { 0xA, 0x4F, 0x37, 0x00, 0x08 }, /* 350 500 3.1 */
> + { 0xC, 0x71, 0x2F, 0x00, 0x10 }, /* 350 700 6.0 */
> + { 0x6, 0x7F, 0x2B, 0x00, 0x14 }, /* 350 900 8.2 */
> + { 0xA, 0x4C, 0x3F, 0x00, 0x00 }, /* 500 500 0.0 */
> + { 0xC, 0x73, 0x34, 0x00, 0x0B }, /* 500 700 2.9 */
> + { 0x6, 0x7F, 0x2F, 0x00, 0x10 }, /* 500 900 5.1 */
> + { 0xC, 0x6C, 0x3C, 0x00, 0x03 }, /* 650 700 0.6 */
> + { 0x6, 0x7F, 0x35, 0x00, 0x0A }, /* 600 900 3.5 */
> + { 0x6, 0x7F, 0x3F, 0x00, 0x00 }, /* 900 900 0.0 */
> };
>
> -/* FIXME - After table is updated in Bspec */
> -/* Voltage Swing Programming for VccIO 1.05V for eDP */
> -static const struct icl_combo_phy_ddi_buf_trans
> icl_combo_phy_ddi_translations_edp_1_05V[] = {
> - /* Voltage mV db */
> - { 0x0, 0x00, 0x00 }, /* 200 0.0 */
> - { 0x0, 0x00, 0x00 }, /* 200 1.5 */
> - { 0x0, 0x00, 0x00 }, /* 200 4.0 */
> - { 0x0, 0x00, 0x00 }, /* 200 6.0 */
> - { 0x0, 0x00, 0x00 }, /* 250 0.0 */
> - { 0x0, 0x00, 0x00 }, /* 250 1.5 */
> - { 0x0, 0x00, 0x00 }, /* 250 4.0 */
> - { 0x0, 0x00, 0x00 }, /* 300 0.0 */
> - { 0x0, 0x00, 0x00 }, /* 300 1.5 */
> - { 0x0, 0x00, 0x00 }, /* 350 0.0 */
> +static const struct cnl_ddi_buf_trans icl_combo_phy_ddi_translations_hdmi[]
> = {
> + /* NT mV Trans mV db */
> + { 0xA, 0x60, 0x3F, 0x00, 0x00 }, /* 450 450 0.0 */
> + { 0xB, 0x73, 0x36, 0x00, 0x09 }, /* 450 650 3.2 */
> + { 0x6, 0x7F, 0x31, 0x00, 0x0E }, /* 450 850 5.5 */
> + { 0xB, 0x73, 0x3F, 0x00, 0x00 }, /* 650 650 0.0 ALS */
> + { 0x6, 0x7F, 0x37, 0x00, 0x08 }, /* 650 850 2.3 */
> + { 0x6, 0x7F, 0x3F, 0x00, 0x00 }, /* 850 850 0.0 */
> + { 0x6, 0x7F, 0x35, 0x00, 0x0A }, /* 600 850 3.0 */
> };
>
> struct icl_mg_phy_ddi_buf_trans {
> @@ -871,43 +826,23 @@ static int skl_buf_trans_num_entries(enum port port,
> int n_entries)
> }
> }
>
> -static const struct icl_combo_phy_ddi_buf_trans *
> +static const struct cnl_ddi_buf_trans *
> icl_get_combo_buf_trans(struct drm_i915_private *dev_priv, enum port port,
> - int type, int *n_entries)
> + int type, int rate, int *n_entries)
> {
> - u32 voltage = I915_READ(ICL_PORT_COMP_DW3(port)) & VOLTAGE_INFO_MASK;
> -
> - if (type == INTEL_OUTPUT_EDP && dev_priv->vbt.edp.low_vswing) {
> - switch (voltage) {
> - case VOLTAGE_INFO_0_85V:
> - *n_entries =
> ARRAY_SIZE(icl_combo_phy_ddi_translations_edp_0_85V);
> - return icl_combo_phy_ddi_translations_edp_0_85V;
> - case VOLTAGE_INFO_0_95V:
> - *n_entries =
> ARRAY_SIZE(icl_combo_phy_ddi_translations_edp_0_95V);
> - return icl_combo_phy_ddi_translations_edp_0_95V;
> - case VOLTAGE_INFO_1_05V:
> - *n_entries =
> ARRAY_SIZE(icl_combo_phy_ddi_translations_edp_1_05V);
> - return icl_combo_phy_ddi_translations_edp_1_05V;
> - default:
> - MISSING_CASE(voltage);
> - return NULL;
> - }
> - } else {
> - switch (voltage) {
> - case VOLTAGE_INFO_0_85V:
> - *n_entries =
> ARRAY_SIZE(icl_combo_phy_ddi_translations_dp_hdmi_0_85V);
> - return icl_combo_phy_ddi_translations_dp_hdmi_0_85V;
> - case VOLTAGE_INFO_0_95V:
> - *n_entries =
> ARRAY_SIZE(icl_combo_phy_ddi_translations_dp_hdmi_0_95V);
> - return icl_combo_phy_ddi_translations_dp_hdmi_0_95V;
> - case VOLTAGE_INFO_1_05V:
> - *n_entries =
> ARRAY_SIZE(icl_combo_phy_ddi_translations_dp_hdmi_1_05V);
> - return icl_combo_phy_ddi_translations_dp_hdmi_1_05V;
> - default:
> - MISSING_CASE(voltage);
> - return NULL;
> - }
> + if (type == INTEL_OUTPUT_HDMI) {
> + *n_entries = ARRAY_SIZE(icl_combo_phy_ddi_translations_hdmi);
> + return icl_combo_phy_ddi_translations_hdmi;
> + } else if (rate > 540000 && type == INTEL_OUTPUT_EDP) {
> + *n_entries =
> ARRAY_SIZE(icl_combo_phy_ddi_translations_edp_hbr3);
> + return icl_combo_phy_ddi_translations_edp_hbr3;
> + } else if (type == INTEL_OUTPUT_EDP && dev_priv->vbt.edp.low_vswing) {
> + *n_entries =
> ARRAY_SIZE(icl_combo_phy_ddi_translations_edp_hbr2);
> + return icl_combo_phy_ddi_translations_edp_hbr2;
> }
> +
> + *n_entries = ARRAY_SIZE(icl_combo_phy_ddi_translations_dp_hbr2);
> + return icl_combo_phy_ddi_translations_dp_hbr2;
> }
>
> static int intel_ddi_hdmi_level(struct drm_i915_private *dev_priv, enum port
> port)
> @@ -918,8 +853,8 @@ static int intel_ddi_hdmi_level(struct drm_i915_private
> *dev_priv, enum port por
>
> if (IS_ICELAKE(dev_priv)) {
> if (intel_port_is_combophy(dev_priv, port))
> - icl_get_combo_buf_trans(dev_priv, port,
> - INTEL_OUTPUT_HDMI, &n_entries);
> + icl_get_combo_buf_trans(dev_priv, port,
> INTEL_OUTPUT_HDMI,
> + 540000, &n_entries);
I take 540000 is completely arbitrary?:) Just pass 0. As a follow-up we
should unify the buf_trans table selection for all DDI platforms, so
here we'll just call a function something like icl_get_buf_trans_hdmi(),
without the need to pass any rate.
Also there is an alignment issue here reported by checkpatch.
> else
> n_entries = ARRAY_SIZE(icl_mg_phy_ddi_translations);
> default_entry = n_entries - 1;
> @@ -2275,13 +2210,16 @@ static void bxt_ddi_vswing_sequence(struct
> intel_encoder *encoder,
> u8 intel_ddi_dp_voltage_max(struct intel_encoder *encoder)
> {
> struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> + struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
This can be moved local to the only block using it.
> enum port port = encoder->port;
> int n_entries;
> + int rate = 0;
No need for a separate var for this, rather ..
>
> if (IS_ICELAKE(dev_priv)) {
> + rate = intel_dp->link_rate;
> if (intel_port_is_combophy(dev_priv, port))
> icl_get_combo_buf_trans(dev_priv, port, encoder->type,
> - &n_entries);
> + rate, &n_entries);
.. pass here intel_dp->link_rate directly.
With the above fixed, the patch looks ok:
Reviewed-by: Imre Deak <imre.d...@intel.com>
> else
> n_entries = ARRAY_SIZE(icl_mg_phy_ddi_translations);
> } else if (IS_CANNONLAKE(dev_priv)) {
> @@ -2462,14 +2400,15 @@ static void cnl_ddi_vswing_sequence(struct
> intel_encoder *encoder,
> }
>
> static void icl_ddi_combo_vswing_program(struct drm_i915_private *dev_priv,
> - u32 level, enum port port, int type)
> + u32 level, enum port port, int type,
> + int rate)
> {
> - const struct icl_combo_phy_ddi_buf_trans *ddi_translations = NULL;
> + const struct cnl_ddi_buf_trans *ddi_translations = NULL;
> u32 n_entries, val;
> int ln;
>
> ddi_translations = icl_get_combo_buf_trans(dev_priv, port, type,
> - &n_entries);
> + rate, &n_entries);
> if (!ddi_translations)
> return;
>
> @@ -2478,34 +2417,23 @@ static void icl_ddi_combo_vswing_program(struct
> drm_i915_private *dev_priv,
> level = n_entries - 1;
> }
>
> - /* Set PORT_TX_DW5 Rterm Sel to 110b. */
> + /* Set PORT_TX_DW5 */
> val = I915_READ(ICL_PORT_TX_DW5_LN0(port));
> - val &= ~RTERM_SELECT_MASK;
> + val &= ~(SCALING_MODE_SEL_MASK | RTERM_SELECT_MASK |
> + TAP2_DISABLE | TAP3_DISABLE);
> + val |= SCALING_MODE_SEL(0x2);
> val |= RTERM_SELECT(0x6);
> - I915_WRITE(ICL_PORT_TX_DW5_GRP(port), val);
> -
> - /* Program PORT_TX_DW5 */
> - val = I915_READ(ICL_PORT_TX_DW5_LN0(port));
> - /* Set DisableTap2 and DisableTap3 if MIPI DSI
> - * Clear DisableTap2 and DisableTap3 for all other Ports
> - */
> - if (type == INTEL_OUTPUT_DSI) {
> - val |= TAP2_DISABLE;
> - val |= TAP3_DISABLE;
> - } else {
> - val &= ~TAP2_DISABLE;
> - val &= ~TAP3_DISABLE;
> - }
> + val |= TAP3_DISABLE;
> I915_WRITE(ICL_PORT_TX_DW5_GRP(port), val);
>
> /* Program PORT_TX_DW2 */
> val = I915_READ(ICL_PORT_TX_DW2_LN0(port));
> val &= ~(SWING_SEL_LOWER_MASK | SWING_SEL_UPPER_MASK |
> RCOMP_SCALAR_MASK);
> - val |= SWING_SEL_UPPER(ddi_translations[level].dw2_swing_select);
> - val |= SWING_SEL_LOWER(ddi_translations[level].dw2_swing_select);
> + val |= SWING_SEL_UPPER(ddi_translations[level].dw2_swing_sel);
> + val |= SWING_SEL_LOWER(ddi_translations[level].dw2_swing_sel);
> /* Program Rcomp scalar for every table entry */
> - val |= RCOMP_SCALAR(ddi_translations[level].dw2_swing_scalar);
> + val |= RCOMP_SCALAR(0x98);
> I915_WRITE(ICL_PORT_TX_DW2_GRP(port), val);
>
> /* Program PORT_TX_DW4 */
> @@ -2514,9 +2442,17 @@ static void icl_ddi_combo_vswing_program(struct
> drm_i915_private *dev_priv,
> val = I915_READ(ICL_PORT_TX_DW4_LN(port, ln));
> val &= ~(POST_CURSOR_1_MASK | POST_CURSOR_2_MASK |
> CURSOR_COEFF_MASK);
> - val |= ddi_translations[level].dw4_scaling;
> + val |= POST_CURSOR_1(ddi_translations[level].dw4_post_cursor_1);
> + val |= POST_CURSOR_2(ddi_translations[level].dw4_post_cursor_2);
> + val |= CURSOR_COEFF(ddi_translations[level].dw4_cursor_coeff);
> I915_WRITE(ICL_PORT_TX_DW4_LN(port, ln), val);
> }
> +
> + /* Program PORT_TX_DW7 */
> + val = I915_READ(ICL_PORT_TX_DW7_LN0(port));
> + val &= ~N_SCALAR_MASK;
> + val |= N_SCALAR(ddi_translations[level].dw7_n_scalar);
> + I915_WRITE(ICL_PORT_TX_DW7_GRP(port), val);
> }
>
> static void icl_combo_phy_ddi_vswing_sequence(struct intel_encoder *encoder,
> @@ -2581,7 +2517,7 @@ static void icl_combo_phy_ddi_vswing_sequence(struct
> intel_encoder *encoder,
> I915_WRITE(ICL_PORT_TX_DW5_GRP(port), val);
>
> /* 5. Program swing and de-emphasis */
> - icl_ddi_combo_vswing_program(dev_priv, level, port, type);
> + icl_ddi_combo_vswing_program(dev_priv, level, port, type, rate);
>
> /* 6. Set training enable to trigger update */
> val = I915_READ(ICL_PORT_TX_DW5_LN0(port));
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index e94faa0..936fcfb 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -304,9 +304,11 @@ static int cnl_max_source_rate(struct intel_dp *intel_dp)
> static int icl_max_source_rate(struct intel_dp *intel_dp)
> {
> struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
> + struct drm_i915_private *dev_priv = to_i915(dig_port->base.base.dev);
> enum port port = dig_port->base.port;
>
> - if (port == PORT_B)
> + if (intel_port_is_combophy(dev_priv, port) &&
> + !intel_dp_is_edp(intel_dp))
> return 540000;
>
> return 810000;
> --
> 1.9.1
>
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
