On Fri, Nov 09, 2018 at 05:04:40PM +0200, Ville Syrjälä wrote:
> On Fri, Nov 09, 2018 at 04:58:20PM +0200, Imre Deak wrote:
> > A DMC bug on GEN9 big core machines fails to restore the driver's
> > request bits for the PW1 and MISC_IO power wells after a DC5/6
> > entry->exit sequence. As a consequence the driver's subsequent check for
> > the enabled status of these power wells will fail, as the check
> > considers the power wells being enabled only if both the status and
> > request bits are set. To work around this borrow the request bits from
> > BIOS's own request register in which DMC forces on the request bits when
> > exiting from DC5/6.
> >
> > This fixes a problem reported by Ramalingam, where HDCP init failed,
> > since PW1 reported itself as being disabled, while in reality it was
> > enabled.
> >
> > Reported-by: Ramalingam C <ramalinga...@intel.com>
> > Cc: Ramalingam C <ramalinga...@intel.com>
> > Cc: Daniel Vetter <daniel.vet...@ffwll.ch>
> > Cc: Ville Syrjälä <ville.syrj...@linux.intel.com>
> > Signed-off-by: Imre Deak <imre.d...@intel.com>
> > ---
> > drivers/gpu/drm/i915/intel_runtime_pm.c | 16 +++++++++++++++-
> > 1 file changed, 15 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c
> > b/drivers/gpu/drm/i915/intel_runtime_pm.c
> > index f945db6ea420..9c49b876055d 100644
> > --- a/drivers/gpu/drm/i915/intel_runtime_pm.c
> > +++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
> > @@ -493,11 +493,25 @@ static bool hsw_power_well_enabled(struct
> > drm_i915_private *dev_priv,
> > struct i915_power_well *power_well)
> > {
> > const struct i915_power_well_regs *regs = power_well->desc->hsw.regs;
> > + enum i915_power_well_id id = power_well->desc->id;
> > int pw_idx = power_well->desc->hsw.idx;
> > u32 mask = HSW_PWR_WELL_CTL_REQ(pw_idx) |
> > HSW_PWR_WELL_CTL_STATE(pw_idx);
> > + u32 val;
> > +
> > + val = I915_READ(regs->driver);
> > +
> > + /*
> > + * On GEN9 big core due to a DMC bug the driver's request bits for PW1
> > + * and the MISC_IO PW will be not restored, so check instead for the
> > + * BIOS's own request bits, which are forced-on for these power wells
> > + * when exiting DC5/6.
> > + */
> > + if (IS_GEN9(dev_priv) && !IS_GEN9_LP(dev_priv) &&
>
> IS_GEN9_BC() ?
Yep, should've known there must be a macro for this already :/
>
> Apart from that
> Reviewed-by: Ville Syrjälä <ville.syrj...@linux.intel.com>
>
> > + (id == SKL_DISP_PW_1 || id == SKL_DISP_PW_MISC_IO))
> > + val |= I915_READ(regs->bios);
> >
> > - return (I915_READ(regs->driver) & mask) == mask;
> > + return (val & mask) == mask;
> > }
> >
> > static void assert_can_enable_dc9(struct drm_i915_private *dev_priv)
> > --
> > 2.13.2
>
> --
> Ville Syrjälä
> Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
