On Wed, 31 Oct 2018, Madhav Chauhan <madhav.chau...@intel.com> wrote:
> On 10/30/2018 5:26 PM, Jani Nikula wrote:
>> From: Madhav Chauhan <madhav.chau...@intel.com>
>>
>> This patch programs maximum size of the payload transmitted
>> from peripheral back to the host processor using short packet
>> as a part of panel programming.
>>
>> v2: Rebase
>>
>> v3 by Jani:
>> - Add FIXME note.
>
> Looks OK to me.
Thanks, pushed patches 1-3 to dinq.
BR,
Jani.
>
> Regards,
> Madhav
>
>>
>> Signed-off-by: Madhav Chauhan <madhav.chau...@intel.com>
>> Signed-off-by: Jani Nikula <jani.nik...@intel.com>
>> ---
>> drivers/gpu/drm/i915/icl_dsi.c | 33 +++++++++++++++++++++++++++++++++
>> 1 file changed, 33 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/i915/icl_dsi.c b/drivers/gpu/drm/i915/icl_dsi.c
>> index 216a1753d246..9c424adc8b75 100644
>> --- a/drivers/gpu/drm/i915/icl_dsi.c
>> +++ b/drivers/gpu/drm/i915/icl_dsi.c
>> @@ -25,6 +25,7 @@
>> * Jani Nikula <jani.nik...@intel.com>
>> */
>>
>> +#include <drm/drm_mipi_dsi.h>
>> #include "intel_dsi.h"
>>
>> static enum transcoder dsi_port_to_transcoder(enum port port)
>> @@ -636,6 +637,35 @@ gen11_dsi_enable_port_and_phy(struct intel_encoder
>> *encoder,
>> gen11_dsi_configure_transcoder(encoder, pipe_config);
>> }
>>
>> +static void gen11_dsi_powerup_panel(struct intel_encoder *encoder)
>> +{
>> + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
>> + struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
>> + struct mipi_dsi_device *dsi;
>> + enum port port;
>> + enum transcoder dsi_trans;
>> + u32 tmp;
>> + int ret;
>> +
>> + /* set maximum return packet size */
>> + for_each_dsi_port(port, intel_dsi->ports) {
>> + dsi_trans = dsi_port_to_transcoder(port);
>> +
>> + /*
>> + * FIXME: This uses the number of DW's currently in the payload
>> + * receive queue. This is probably not what we want here.
>> + */
>> + tmp = I915_READ(DSI_CMD_RXCTL(dsi_trans));
>> + tmp &= NUMBER_RX_PLOAD_DW_MASK;
>> + /* multiply "Number Rx Payload DW" by 4 to get max value */
>> + tmp = tmp * 4;
>> + dsi = intel_dsi->dsi_hosts[port]->device;
>> + ret = mipi_dsi_set_maximum_return_packet_size(dsi, tmp);
>> + if (ret < 0)
>> + DRM_ERROR("error setting max return pkt size%d\n", tmp);
>> + }
>> +}
>> +
>> static void __attribute__((unused))
>> gen11_dsi_pre_enable(struct intel_encoder *encoder,
>> const struct intel_crtc_state *pipe_config,
>> @@ -650,6 +680,9 @@ gen11_dsi_pre_enable(struct intel_encoder *encoder,
>> /* step4: enable DSI port and DPHY */
>> gen11_dsi_enable_port_and_phy(encoder, pipe_config);
>>
>> + /* step5: program and powerup panel */
>> + gen11_dsi_powerup_panel(encoder);
>> +
>> /* step6c: configure transcoder timings */
>> gen11_dsi_set_transcoder_timings(encoder, pipe_config);
>>
>
--
Jani Nikula, Intel Open Source Graphics Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
