On Thu, Oct 18, 2018 at 01:51:31PM +0200, Maarten Lankhorst wrote:
> The first 3 planes (primary, sprite 0 and 1) have a dedicated chroma
> upsampler to upscale YUV420 to YUV444 and the scaler should only be
> used for upscaling. Because of this we shouldn't program the scalers
> in planar mode if NV12 and the chroma upsampler are used. Instead
> program the scalers like on normal planes.
>
> Sprite 2 and 3 have no dedicated scaler, and need to program the
> selected Y plane in the scaler mode.
>
> Changes since v1:
> - Make the comment less confusing.
> Changes since v2:
> - Fix checkpatch warning (Matt)
> - gen10- -> Pre-gen11 (Ville)
> - PS_SCALER_MODE_PACKED -> PS_SCALER_MODE_NORMAL. (Matt)
> - Add comment about scaler mode in intel_atomic_setup_scaler(). (Matt)
> - Rename need_scaling to need_scaler. (Matt)
> - Move the crtc need_scaling check to skl_update_scaler_crtc().
>
> Signed-off-by: Maarten Lankhorst <maarten.lankho...@linux.intel.com>
I like it.
Reviewed-by: Ville Syrjälä <ville.syrj...@linux.intel.com>
> ---
> drivers/gpu/drm/i915/i915_reg.h | 4 ++-
> drivers/gpu/drm/i915/intel_atomic.c | 16 +++++++++---
> drivers/gpu/drm/i915/intel_display.c | 37 ++++++++++++++--------------
> drivers/gpu/drm/i915/intel_drv.h | 8 ++++++
> drivers/gpu/drm/i915/intel_sprite.c | 3 ++-
> 5 files changed, 44 insertions(+), 24 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 81f1c601987d..8a81e7c2fe25 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -6819,7 +6819,7 @@ enum {
> #define SKL_PS_SCALER_MODE_HQ (1 << 28)
> #define SKL_PS_SCALER_MODE_NV12 (2 << 28)
> #define PS_SCALER_MODE_PLANAR (1 << 29)
> -#define PS_SCALER_MODE_PACKED (0 << 29)
> +#define PS_SCALER_MODE_NORMAL (0 << 29)
> #define PS_PLANE_SEL_MASK (7 << 25)
> #define PS_PLANE_SEL(plane) (((plane) + 1) << 25)
> #define PS_FILTER_MASK (3 << 23)
> @@ -6836,6 +6836,8 @@ enum {
> #define PS_VADAPT_MODE_LEAST_ADAPT (0 << 5)
> #define PS_VADAPT_MODE_MOD_ADAPT (1 << 5)
> #define PS_VADAPT_MODE_MOST_ADAPT (3 << 5)
> +#define PS_PLANE_Y_SEL_MASK (7 << 5)
> +#define PS_PLANE_Y_SEL(plane) (((plane) + 1) << 5)
>
> #define _PS_PWR_GATE_1A 0x68160
> #define _PS_PWR_GATE_2A 0x68260
> diff --git a/drivers/gpu/drm/i915/intel_atomic.c
> b/drivers/gpu/drm/i915/intel_atomic.c
> index 20bfc89c652c..7238ab615548 100644
> --- a/drivers/gpu/drm/i915/intel_atomic.c
> +++ b/drivers/gpu/drm/i915/intel_atomic.c
> @@ -233,13 +233,23 @@ static void intel_atomic_setup_scaler(struct
> intel_crtc_scaler_state *scaler_sta
> plane_state->base.fb->format->is_yuv &&
> plane_state->base.fb->format->num_planes > 1) {
> if (INTEL_GEN(dev_priv) == 9 &&
> - !IS_GEMINILAKE(dev_priv))
> + !IS_GEMINILAKE(dev_priv)) {
> mode = SKL_PS_SCALER_MODE_NV12;
> - else
> + } else if
> (icl_is_hdr_plane(to_intel_plane(plane_state->base.plane))) {
> + /*
> + * On gen11+'s HDR planes we only use the scaler for
> + * scaling. They have a dedicated chroma upsampler, so
> + * we don't need the scaler to upsample the UV plane.
> + */
> + mode = PS_SCALER_MODE_NORMAL;
> + } else {
> mode = PS_SCALER_MODE_PLANAR;
>
> + if (plane_state->linked_plane)
> + mode |=
> PS_PLANE_Y_SEL(plane_state->linked_plane->id);
> + }
> } else if (INTEL_GEN(dev_priv) > 9 || IS_GEMINILAKE(dev_priv)) {
> - mode = PS_SCALER_MODE_PACKED;
> + mode = PS_SCALER_MODE_NORMAL;
> } else if (num_scalers_need == 1 && intel_crtc->num_scalers > 1) {
> /*
> * when only 1 scaler is in use on a pipe with 2 scalers
> diff --git a/drivers/gpu/drm/i915/intel_display.c
> b/drivers/gpu/drm/i915/intel_display.c
> index cbb3fb1d5ad4..5997097177e9 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -4836,8 +4836,7 @@ static int
> skl_update_scaler(struct intel_crtc_state *crtc_state, bool force_detach,
> unsigned int scaler_user, int *scaler_id,
> int src_w, int src_h, int dst_w, int dst_h,
> - bool plane_scaler_check,
> - uint32_t pixel_format)
> + const struct drm_format_info *format, bool need_scaler)
> {
> struct intel_crtc_scaler_state *scaler_state =
> &crtc_state->scaler_state;
> @@ -4846,22 +4845,14 @@ skl_update_scaler(struct intel_crtc_state
> *crtc_state, bool force_detach,
> struct drm_i915_private *dev_priv = to_i915(intel_crtc->base.dev);
> const struct drm_display_mode *adjusted_mode =
> &crtc_state->base.adjusted_mode;
> - int need_scaling;
>
> /*
> * Src coordinates are already rotated by 270 degrees for
> * the 90/270 degree plane rotation cases (to match the
> * GTT mapping), hence no need to account for rotation here.
> */
> - need_scaling = src_w != dst_w || src_h != dst_h;
> -
> - if (plane_scaler_check)
> - if (pixel_format == DRM_FORMAT_NV12)
> - need_scaling = true;
> -
> - if (crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR420 &&
> - scaler_user == SKL_CRTC_INDEX)
> - need_scaling = true;
> + if (src_w != dst_w || src_h != dst_h)
> + need_scaler = true;
>
> /*
> * Scaling/fitting not supported in IF-ID mode in GEN9+
> @@ -4870,7 +4861,7 @@ skl_update_scaler(struct intel_crtc_state *crtc_state,
> bool force_detach,
> * for NV12.
> */
> if (INTEL_GEN(dev_priv) >= 9 && crtc_state->base.enable &&
> - need_scaling && adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) {
> + need_scaler && adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) {
> DRM_DEBUG_KMS("Pipe/Plane scaling not supported with IF-ID
> mode\n");
> return -EINVAL;
> }
> @@ -4885,7 +4876,7 @@ skl_update_scaler(struct intel_crtc_state *crtc_state,
> bool force_detach,
> * update to free the scaler is done in plane/panel-fit programming.
> * For this purpose crtc/plane_state->scaler_id isn't reset here.
> */
> - if (force_detach || !need_scaling) {
> + if (force_detach || !need_scaler) {
> if (*scaler_id >= 0) {
> scaler_state->scaler_users &= ~(1 << scaler_user);
> scaler_state->scalers[*scaler_id].in_use = 0;
> @@ -4899,7 +4890,7 @@ skl_update_scaler(struct intel_crtc_state *crtc_state,
> bool force_detach,
> return 0;
> }
>
> - if (plane_scaler_check && pixel_format == DRM_FORMAT_NV12 &&
> + if (format && format->format == DRM_FORMAT_NV12 &&
> (src_h < SKL_MIN_YUV_420_SRC_H || src_w < SKL_MIN_YUV_420_SRC_W)) {
> DRM_DEBUG_KMS("NV12: src dimensions not met\n");
> return -EINVAL;
> @@ -4942,12 +4933,16 @@ skl_update_scaler(struct intel_crtc_state
> *crtc_state, bool force_detach,
> int skl_update_scaler_crtc(struct intel_crtc_state *state)
> {
> const struct drm_display_mode *adjusted_mode =
> &state->base.adjusted_mode;
> + bool need_scaler = false;
> +
> + if (state->output_format == INTEL_OUTPUT_FORMAT_YCBCR420)
> + need_scaler = true;
>
> return skl_update_scaler(state, !state->base.active, SKL_CRTC_INDEX,
> &state->scaler_state.scaler_id,
> state->pipe_src_w, state->pipe_src_h,
> adjusted_mode->crtc_hdisplay,
> - adjusted_mode->crtc_vdisplay, false, 0);
> + adjusted_mode->crtc_vdisplay, NULL,
> need_scaler);
> }
>
> /**
> @@ -4962,13 +4957,17 @@ int skl_update_scaler_crtc(struct intel_crtc_state
> *state)
> static int skl_update_scaler_plane(struct intel_crtc_state *crtc_state,
> struct intel_plane_state *plane_state)
> {
> -
> struct intel_plane *intel_plane =
> to_intel_plane(plane_state->base.plane);
> struct drm_framebuffer *fb = plane_state->base.fb;
> int ret;
> -
> bool force_detach = !fb || !plane_state->base.visible;
> + bool need_scaler = false;
> +
> + /* Pre-gen11 and SDR planes always need a scaler for planar formats. */
> + if (!icl_is_hdr_plane(intel_plane) &&
> + fb && fb->format->format == DRM_FORMAT_NV12)
> + need_scaler = true;
>
> ret = skl_update_scaler(crtc_state, force_detach,
> drm_plane_index(&intel_plane->base),
> @@ -4977,7 +4976,7 @@ static int skl_update_scaler_plane(struct
> intel_crtc_state *crtc_state,
> drm_rect_height(&plane_state->base.src) >> 16,
> drm_rect_width(&plane_state->base.dst),
> drm_rect_height(&plane_state->base.dst),
> - fb ? true : false, fb ? fb->format->format : 0);
> + fb ? fb->format : NULL, need_scaler);
>
> if (ret || plane_state->scaler_id < 0)
> return ret;
> diff --git a/drivers/gpu/drm/i915/intel_drv.h
> b/drivers/gpu/drm/i915/intel_drv.h
> index 272de906a001..f1d196bcdb66 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -2211,6 +2211,14 @@ static inline bool icl_is_nv12_y_plane(enum plane_id
> id)
> return false;
> }
>
> +static inline bool icl_is_hdr_plane(struct intel_plane *plane)
> +{
> + if (INTEL_GEN(to_i915(plane->base.dev)) < 11)
> + return false;
> +
> + return plane->id < PLANE_SPRITE2;
> +}
> +
> /* intel_tv.c */
> void intel_tv_init(struct drm_i915_private *dev_priv);
>
> diff --git a/drivers/gpu/drm/i915/intel_sprite.c
> b/drivers/gpu/drm/i915/intel_sprite.c
> index 7cd59eee5cad..a2a4328107b6 100644
> --- a/drivers/gpu/drm/i915/intel_sprite.c
> +++ b/drivers/gpu/drm/i915/intel_sprite.c
> @@ -332,7 +332,8 @@ skl_program_scaler(struct drm_i915_private *dev_priv,
> crtc_h--;
>
> /* TODO: handle sub-pixel coordinates */
> - if (plane_state->base.fb->format->format == DRM_FORMAT_NV12) {
> + if (plane_state->base.fb->format->format == DRM_FORMAT_NV12 &&
> + !icl_is_hdr_plane(plane)) {
> y_hphase = skl_scaler_calc_phase(1, false);
> y_vphase = skl_scaler_calc_phase(1, false);
>
> --
> 2.19.1
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
