ELD info should be updated dynamically according to hot plug event.
For haswell chip, clear/set the eld valid bit and output enable bit
from callback intel_disable/eanble_ddi().
Signed-off-by: Wang Xingchao <xingchao.w...@intel.com>
---
drivers/gpu/drm/i915/intel_ddi.c | 22 ++++++++++++++++++++++
drivers/gpu/drm/i915/intel_display.c | 2 ++
drivers/gpu/drm/i915/intel_drv.h | 1 +
3 files changed, 25 insertions(+)
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index f02b3fe..c23dd63 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -1274,10 +1274,14 @@ static void intel_ddi_post_disable(struct intel_encoder
*intel_encoder)
static void intel_enable_ddi(struct intel_encoder *intel_encoder)
{
struct drm_encoder *encoder = &intel_encoder->base;
+ struct drm_crtc *crtc = encoder->crtc;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ int pipe = intel_crtc->pipe;
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
enum port port = intel_ddi_get_encoder_port(intel_encoder);
int type = intel_encoder->type;
+ int tmp;
if (type == INTEL_OUTPUT_HDMI) {
/* In HDMI/DVI mode, the port width, and swing/emphasis values
@@ -1290,18 +1294,36 @@ static void intel_enable_ddi(struct intel_encoder
*intel_encoder)
ironlake_edp_backlight_on(intel_dp);
}
+
+ if (!intel_crtc->eld_vld) {
+ tmp = I915_READ(HSW_AUD_PIN_ELD_CP_VLD);
+ tmp |= ((AUDIO_OUTPUT_ENABLE_A | AUDIO_ELD_VALID_A) << (pipe *
4));
+ I915_WRITE(HSW_AUD_PIN_ELD_CP_VLD, tmp);
+ intel_crtc->eld_vld = true;
+ }
}
static void intel_disable_ddi(struct intel_encoder *intel_encoder)
{
struct drm_encoder *encoder = &intel_encoder->base;
+ struct drm_crtc *crtc = encoder->crtc;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ int pipe = intel_crtc->pipe;
int type = intel_encoder->type;
+ struct drm_device *dev = encoder->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int tmp;
if (type == INTEL_OUTPUT_EDP) {
struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
ironlake_edp_backlight_off(intel_dp);
}
+
+ tmp = I915_READ(HSW_AUD_PIN_ELD_CP_VLD);
+ tmp &= ~((AUDIO_OUTPUT_ENABLE_A | AUDIO_ELD_VALID_A) << (pipe * 4));
+ I915_WRITE(HSW_AUD_PIN_ELD_CP_VLD, tmp);
+ intel_crtc->eld_vld = false;
}
int intel_ddi_get_cdclk_freq(struct drm_i915_private *dev_priv)
diff --git a/drivers/gpu/drm/i915/intel_display.c
b/drivers/gpu/drm/i915/intel_display.c
index 1464e47..4e56abe 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -5622,6 +5622,7 @@ static void haswell_write_eld(struct drm_connector
*connector,
struct drm_i915_private *dev_priv = connector->dev->dev_private;
uint8_t *eld = connector->eld;
struct drm_device *dev = crtc->dev;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
uint32_t eldv;
uint32_t i;
int len;
@@ -5663,6 +5664,7 @@ static void haswell_write_eld(struct drm_connector
*connector,
DRM_DEBUG_DRIVER("ELD on pipe %c\n", pipe_name(pipe));
eldv = AUDIO_ELD_VALID_A << (pipe * 4);
+ intel_crtc->eld_vld = true;
if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) {
DRM_DEBUG_DRIVER("ELD: DisplayPort detected\n");
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 116580b..be588da 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -206,6 +206,7 @@ struct intel_crtc {
* some outputs connected to this crtc.
*/
bool active;
+ bool eld_vld;
bool primary_disabled; /* is the crtc obscured by a plane? */
bool lowfreq_avail;
struct intel_overlay *overlay;
--
1.7.9.5
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
