On Thu, Sep 13, 2018 at 02:22:48PM -0700, José Roberto de Souza wrote:
> Instead of have the same code spread into 4 platforms lets share it.
> BXT do not have a PCH so here also handling this case by unseting
> RESET_PCH_HANDSHAKE_ENABLE.
>
> Signed-off-by: José Roberto de Souza <jose.so...@intel.com>
> ---
> drivers/gpu/drm/i915/intel_runtime_pm.c | 29 ++++++++++++++-----------
> 1 file changed, 16 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c
> b/drivers/gpu/drm/i915/intel_runtime_pm.c
> index 480dadb1047b..8bcb33367d0d 100644
> --- a/drivers/gpu/drm/i915/intel_runtime_pm.c
> +++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
> @@ -3239,18 +3239,28 @@ static void icl_mbus_init(struct drm_i915_private
> *dev_priv)
> I915_WRITE(MBUS_ABOX_CTL, val);
> }
>
> +static void skl_pch_reset_handshake(struct drm_i915_private *dev_priv)
> +{
> + u32 val = I915_READ(HSW_NDE_RSTWRN_OPT);
> +
> + if (HAS_PCH_SPLIT(dev_priv))
> + val |= RESET_PCH_HANDSHAKE_ENABLE;
> + else
> + val &= ~RESET_PCH_HANDSHAKE_ENABLE;
> +
> + I915_WRITE(HSW_NDE_RSTWRN_OPT, val);
> +}
hsw has this too. And ivb has a slightly different version. Could unify
it all. And maybe pass the enable/disable as a paramter to make it clear
from reading the calling code what it's doing?
> +
> static void skl_display_core_init(struct drm_i915_private *dev_priv,
> bool resume)
> {
> struct i915_power_domains *power_domains = &dev_priv->power_domains;
> struct i915_power_well *well;
> - uint32_t val;
>
> gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
>
> /* enable PCH reset handshake */
> - val = I915_READ(HSW_NDE_RSTWRN_OPT);
> - I915_WRITE(HSW_NDE_RSTWRN_OPT, val | RESET_PCH_HANDSHAKE_ENABLE);
> + skl_pch_reset_handshake(dev_priv);
>
> /* enable PG1 and Misc I/O */
> mutex_lock(&power_domains->lock);
> @@ -3306,7 +3316,6 @@ void bxt_display_core_init(struct drm_i915_private
> *dev_priv,
> {
> struct i915_power_domains *power_domains = &dev_priv->power_domains;
> struct i915_power_well *well;
> - uint32_t val;
>
> gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
>
> @@ -3316,9 +3325,7 @@ void bxt_display_core_init(struct drm_i915_private
> *dev_priv,
> * Move the handshake programming to initialization sequence.
> * Previously was left up to BIOS.
> */
> - val = I915_READ(HSW_NDE_RSTWRN_OPT);
> - val &= ~RESET_PCH_HANDSHAKE_ENABLE;
> - I915_WRITE(HSW_NDE_RSTWRN_OPT, val);
> + skl_pch_reset_handshake(dev_priv);
>
> /* Enable PG1 */
> mutex_lock(&power_domains->lock);
> @@ -3439,9 +3446,7 @@ static void cnl_display_core_init(struct
> drm_i915_private *dev_priv, bool resume
> gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
>
> /* 1. Enable PCH Reset Handshake */
> - val = I915_READ(HSW_NDE_RSTWRN_OPT);
> - val |= RESET_PCH_HANDSHAKE_ENABLE;
> - I915_WRITE(HSW_NDE_RSTWRN_OPT, val);
> + skl_pch_reset_handshake(dev_priv);
>
> /* 2. Enable Comp */
> val = I915_READ(CHICKEN_MISC_2);
> @@ -3524,9 +3529,7 @@ static void icl_display_core_init(struct
> drm_i915_private *dev_priv,
> gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
>
> /* 1. Enable PCH reset handshake. */
> - val = I915_READ(HSW_NDE_RSTWRN_OPT);
> - val |= RESET_PCH_HANDSHAKE_ENABLE;
> - I915_WRITE(HSW_NDE_RSTWRN_OPT, val);
> + skl_pch_reset_handshake(dev_priv);
>
> for (port = PORT_A; port <= PORT_B; port++) {
> /* 2. Enable DDI combo PHY comp. */
> --
> 2.19.0
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
