From: Madhav Chauhan <madhav.chau...@intel.com>
This patch implements steps specific to DSI for
enabling PLL.
Signed-off-by: Madhav Chauhan <madhav.chau...@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulka...@intel.com>
---
drivers/gpu/drm/i915/icl_dsi.c | 41 ++++++++++++++++++++++++++++++++++++++++-
1 file changed, 40 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/icl_dsi.c b/drivers/gpu/drm/i915/icl_dsi.c
index 13830e4..c530e25 100644
--- a/drivers/gpu/drm/i915/icl_dsi.c
+++ b/drivers/gpu/drm/i915/icl_dsi.c
@@ -54,6 +54,45 @@ static void gen11_dsi_program_esc_clk_div(struct
intel_encoder *encoder)
}
}
+static void gen11_dsi_pll_enable(struct intel_encoder *encoder,
+ const struct intel_crtc_state *pipe_config)
+{
+ struct drm_crtc *crtc = pipe_config->base.crtc;
+ struct drm_i915_private *dev_priv = to_i915(crtc->dev);
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct intel_shared_dpll *pll = intel_crtc->config->shared_dpll;
+ struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
+ enum intel_dpll_id id = pll->info->id;
+ i915_reg_t enable_reg = icl_pll_id_to_enable_reg(id);
+ enum port port;
+ uint32_t val;
+
+ /**
+ * Note: Following PLL enable steps are specific to DSI,
+ * some common steps for all encoder will be done by dpll_enable().
+ */
+
+ mutex_lock(&dev_priv->dpll_lock);
+
+ for_each_dsi_port(port, intel_dsi->ports) {
+ val = I915_READ(DPCLKA_CFGCR0_ICL);
+ val &= ~DPCLKA_CFGCR0_DDI_CLK_SEL_MASK(port);
+ val |= DPCLKA_CFGCR0_DDI_CLK_SEL(pll->info->id, port);
+ I915_WRITE(DPCLKA_CFGCR0_ICL, val);
+ POSTING_READ(DPCLKA_CFGCR0_ICL);
+ }
+
+ mutex_unlock(&dev_priv->dpll_lock);
+
+ gen11_dsi_program_esc_clk_div(encoder);
+ val = I915_READ(enable_reg);
+ val |= PLL_ENABLE;
+ I915_WRITE(enable_reg, val);
+
+ if (wait_for_us((I915_READ(enable_reg) & PLL_LOCK), 600))
+ DRM_ERROR("PLL %d not locked\n", id);
+}
+
static void gen11_dsi_enable_io_power(struct intel_encoder *encoder)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
@@ -120,7 +159,7 @@ static void __attribute__((unused))
gen11_dsi_enable_io_power(encoder);
/* step3: enable DSI PLL */
- gen11_dsi_program_esc_clk_div(encoder);
+ gen11_dsi_pll_enable(encoder, pipe_config);
/* step4: enable DSI port and DPHY */
gen11_dsi_enable_port_and_phy(encoder);
--
1.9.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
