> -----Original Message-----
> From: Kahola, Mika
> Sent: Tuesday, April 17, 2018 2:49 PM
> To: Srinivas, Vidya <vidya.srini...@intel.com>; intel-
> g...@lists.freedesktop.org
> Subject: Re: [Intel-gfx] [PATCH v2 6/6] drm/i915: Do not do fb src
> adjustments for NV12
>
> On Fri, 2018-04-13 at 17:44 +0530, Vidya Srinivas wrote:
> > We skip src trunction/adjustments for
> > NV12 case and handle the sizes directly.
> > Without this, pipe fifo underruns are seen on APL/KBL.
> >
> > v2: For NV12, making the src coordinates multiplier of 4
> >
> > Credits-to: Maarten Lankhorst <maarten.lankho...@linux.intel.com>
> > Signed-off-by: Vidya Srinivas <vidya.srini...@intel.com>
> > ---
> > drivers/gpu/drm/i915/intel_display.c | 11 +++++++++++
> > drivers/gpu/drm/i915/intel_sprite.c | 15 +++++++++++++++
> > 2 files changed, 26 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/i915/intel_display.c
> > b/drivers/gpu/drm/i915/intel_display.c
> > index bc83f10..f64708f 100644
> > --- a/drivers/gpu/drm/i915/intel_display.c
> > +++ b/drivers/gpu/drm/i915/intel_display.c
> > @@ -12978,6 +12978,10 @@ intel_check_primary_plane(struct
> intel_plane
> > *plane,
> > bool can_position = false;
> > int ret;
> > uint32_t pixel_format = 0;
> > + struct drm_plane_state *plane_state = &state->base;
> > + struct drm_rect *src = &plane_state->src;
> This seems unnecessary. We could use the line below to get the src's.
Sure thank you, am moving all the handling code to skl_check_nv12_aux_surface
as suggested
By Maarten. So this wont be necessary.
Regards
Vidya
>
> > +
> > + *src = drm_plane_state_src(plane_state);
> >
> > if (INTEL_GEN(dev_priv) >= 9) {
> > /* use scaler when colorkey is not required */ @@ -13001,6
> > +13005,13 @@ intel_check_primary_plane(struct intel_plane *plane,
> > if (!state->base.fb)
> > return 0;
> >
> > + if (pixel_format == DRM_FORMAT_NV12) {
> > + src->x1 = (((src->x1 >> 16)/4)*4) << 16;
> > + src->x2 = (((src->x2 >> 16)/4)*4) << 16;
> > + src->y1 = (((src->y1 >> 16)/4)*4) << 16;
> > + src->y2 = (((src->y2 >> 16)/4)*4) << 16;
> > + }
> > +
> > if (INTEL_GEN(dev_priv) >= 9) {
> > ret = skl_check_plane_surface(crtc_state, state);
> > if (ret)
> > diff --git a/drivers/gpu/drm/i915/intel_sprite.c
> > b/drivers/gpu/drm/i915/intel_sprite.c
> > index 8b7947d..c1dd85e 100644
> > --- a/drivers/gpu/drm/i915/intel_sprite.c
> > +++ b/drivers/gpu/drm/i915/intel_sprite.c
> > @@ -1035,11 +1035,20 @@ intel_check_sprite_plane(struct intel_plane
> > *plane,
> > return vscale;
> > }
> >
> > + if (fb->format->format == DRM_FORMAT_NV12) {
> > + if (src->x2 >> 16 == 16)
> > + src->x2 = 16 << 16;
> > + if (src->y2 >> 16 == 16)
> > + src->y2 = 16 << 16;
> > + goto nv12_min_no_clip;
> > + }
> > +
> > /* Make the source viewport size an exact multiple of the
> scaling
> > factors. */
> > drm_rect_adjust_size(src,
> > drm_rect_width(dst) * hscale -
> drm_rect_width(src),
> > drm_rect_height(dst) * vscale -
> drm_rect_height(src));
> >
> > +nv12_min_no_clip:
> > drm_rect_rotate_inv(src, fb->width << 16, fb->height << 16,
> > state->base.rotation);
> >
> > @@ -1105,6 +1114,12 @@ intel_check_sprite_plane(struct intel_plane
> > *plane,
> > src->x2 = (src_x + src_w) << 16;
> > src->y1 = src_y << 16;
> > src->y2 = (src_y + src_h) << 16;
> > + if (fb->format->format == DRM_FORMAT_NV12) {
> > + src->x1 = (((src->x1 >> 16)/4)*4) << 16;
> > + src->x2 = (((src->x2 >> 16)/4)*4) << 16;
> > + src->y1 = (((src->y1 >> 16)/4)*4) << 16;
> > + src->y2 = (((src->y2 >> 16)/4)*4) << 16;
> > + }
> > }
> >
> > dst->x1 = crtc_x;
> --
> Mika Kahola - Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
