As described in the WA on GLK and CNL planes on the right edge of the
screen that have less than 4 pixels visible from the beginning of the
plane to the edge of the screen can cause FIFO underflow and display
corruption.
On GLK/CNL I could trigger the problem only if the plane was at the same
time also aligned to the top edge of the screen (after clipping) and
there were exactly 2 pixels visible from the start of the plane to the
right edge of the screen (so couldn't trigger it with 1 or 3 pixels
visible). Nevertheless, to be sure, I also applied the WA for these cases.
I also couldn't see any problem with the cursor plane and later Art
confirmed that it's not affected, so the WA is applied only for the
other plane types.
Signed-off-by: Imre Deak <imre.d...@intel.com>
---
drivers/gpu/drm/i915/intel_display.c | 28 ++++++++++++++++++++++++----
drivers/gpu/drm/i915/intel_drv.h | 3 ++-
drivers/gpu/drm/i915/intel_sprite.c | 2 +-
3 files changed, 27 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_display.c
b/drivers/gpu/drm/i915/intel_display.c
index 221e3a183d36..3d931b652795 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2917,14 +2917,19 @@ static bool skl_check_main_ccs_coordinates(struct
intel_plane_state *plane_state
return true;
}
-static int skl_check_main_surface(struct intel_plane_state *plane_state)
+static int skl_check_main_surface(const struct intel_crtc_state *crtc_state,
+ struct intel_plane_state *plane_state)
{
+ struct drm_i915_private *dev_priv =
+ to_i915(plane_state->base.plane->dev);
const struct drm_framebuffer *fb = plane_state->base.fb;
unsigned int rotation = plane_state->base.rotation;
int x = plane_state->base.src.x1 >> 16;
int y = plane_state->base.src.y1 >> 16;
int w = drm_rect_width(&plane_state->base.src) >> 16;
int h = drm_rect_height(&plane_state->base.src) >> 16;
+ int dst_x = plane_state->base.dst.x1;
+ int pipe_src_w = crtc_state->pipe_src_w;
int max_width = skl_max_plane_width(fb, 0, rotation);
int max_height = 4096;
u32 alignment, offset, aux_offset = plane_state->aux.offset;
@@ -2935,6 +2940,20 @@ static int skl_check_main_surface(struct
intel_plane_state *plane_state)
return -EINVAL;
}
+ /*
+ * Display WA #1175: cnl,glk
+ * Planes other than the cursor may cause FIFO underflow and display
+ * corruption if starting less than 4 pixels from the right edge of
+ * the screen.
+ */
+ if ((IS_GEMINILAKE(dev_priv) || IS_CANNONLAKE(dev_priv)) &&
+ dst_x > pipe_src_w - 4) {
+ DRM_DEBUG_KMS("requested plane X start position %d invalid
(valid range %d-%d)\n",
+ dst_x,
+ 0, pipe_src_w - 4);
+ return -EINVAL;
+ }
+
intel_add_fb_offsets(&x, &y, plane_state, 0);
offset = intel_compute_tile_offset(&x, &y, plane_state, 0);
alignment = intel_surf_alignment(fb, 0);
@@ -3067,7 +3086,8 @@ static int skl_check_ccs_aux_surface(struct
intel_plane_state *plane_state)
return 0;
}
-int skl_check_plane_surface(struct intel_plane_state *plane_state)
+int skl_check_plane_surface(const struct intel_crtc_state *crtc_state,
+ struct intel_plane_state *plane_state)
{
const struct drm_framebuffer *fb = plane_state->base.fb;
unsigned int rotation = plane_state->base.rotation;
@@ -3107,7 +3127,7 @@ int skl_check_plane_surface(struct intel_plane_state
*plane_state)
plane_state->aux.y = 0;
}
- ret = skl_check_main_surface(plane_state);
+ ret = skl_check_main_surface(crtc_state, plane_state);
if (ret)
return ret;
@@ -12766,7 +12786,7 @@ intel_check_primary_plane(struct intel_plane *plane,
return 0;
if (INTEL_GEN(dev_priv) >= 9) {
- ret = skl_check_plane_surface(state);
+ ret = skl_check_plane_surface(crtc_state, state);
if (ret)
return ret;
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 731dc36d7129..5e23da04837e 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -1588,7 +1588,8 @@ u32 skl_plane_ctl(const struct intel_crtc_state
*crtc_state,
const struct intel_plane_state *plane_state);
u32 skl_plane_stride(const struct drm_framebuffer *fb, int plane,
unsigned int rotation);
-int skl_check_plane_surface(struct intel_plane_state *plane_state);
+int skl_check_plane_surface(const struct intel_crtc_state *crtc_state,
+ struct intel_plane_state *plane_state);
int i9xx_check_plane_surface(struct intel_plane_state *plane_state);
/* intel_csr.c */
diff --git a/drivers/gpu/drm/i915/intel_sprite.c
b/drivers/gpu/drm/i915/intel_sprite.c
index dd485f59eb1d..b8b617ba0c0c 100644
--- a/drivers/gpu/drm/i915/intel_sprite.c
+++ b/drivers/gpu/drm/i915/intel_sprite.c
@@ -1027,7 +1027,7 @@ intel_check_sprite_plane(struct intel_plane *plane,
dst->y2 = crtc_y + crtc_h;
if (INTEL_GEN(dev_priv) >= 9) {
- ret = skl_check_plane_surface(state);
+ ret = skl_check_plane_surface(crtc_state, state);
if (ret)
return ret;
--
2.13.2
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
