Instead of sleeping for a fixed 1ms (roughly, depending on timer slack),
start with a small sleep and exponentially increase the sleep on each
cycle.
A good example of a beneficiary is the guc mmio communication channel.
Typically we expect (and so spin) for 10us for a quick response, but this
doesn't cover everything and so sometimes we fallback to the millisecond+
sleep. This incurs a significant delay in time-critical operations like
preemption (igt/gem_exec_latency), which can be improved significantly by
using a small sleep after the spin fails.
We've made this suggestion many times, but had little experimental data
to support adding the complexity.
v2: Bump the minimum usleep to 10us on advice of
Documentation/timers/timers-howto.txt (Tvrko)
References: 1758b90e38f5 ("drm/i915: Use a hybrid scheme for fast register
waits")
Signed-off-by: Chris Wilson <ch...@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursu...@intel.com>
Cc: John Harrison <john.c.harri...@intel.com>
Cc: Michał Winiarski <michal.winiar...@intel.com>
Cc: Ville Syrjala <ville.syrj...@linux.intel.com>
---
drivers/gpu/drm/i915/intel_drv.h | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 69aab324aaa1..3e115599c2e6 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -50,6 +50,7 @@
*/
#define _wait_for(COND, US, W) ({ \
unsigned long timeout__ = jiffies + usecs_to_jiffies(US) + 1; \
+ long wait__ = 10; /* recommended minimum for usleep */ \
int ret__; \
might_sleep(); \
for (;;) { \
@@ -62,7 +63,9 @@
ret__ = -ETIMEDOUT; \
break; \
} \
- usleep_range((W), (W) * 2); \
+ usleep_range(wait__, wait__ * 2); \
+ if (wait__ < (W)) \
+ wait__ <<= 1; \
} \
ret__; \
})
--
2.15.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
