Good evening.
I have a config question about a multi monitor setup:
I'm using the intel driver xf86-video-intel 2.20.0 and want to start a single
driver instance for each screen in xorg in order to use xinerama. Because at
the moment every window which i maximize spans over the whole screen, i want ti
use xinerama.
I have two device sections in my xorg.conf but only the first is used.
Her's my xorg.conf:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
Screen 2 "Screen2" RightOf "Screen1"
Screen 3 "Screen3" RightOf "Screen2"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib64/xorg/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/OTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection
Section "Module"
Load "record"
Load "glx"
Load "extmod"
Load "dbe"
Load "RandR"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "DELL"
ModelName "U2410"
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 76.0
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "DELL"
ModelName "U2410"
Option "Primary" "true"
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 76.0
EndSection
Section "Monitor"
Identifier "Monitor2"
VendorName "DELL"
ModelName "1908WFP"
Option "dpms"
Option "PreferredMode" "1440x900"
EndSection
Section "Monitor"
Identifier "Monitor3"
VendorName "DELL"
ModelName "LCD"
Option "dpms"
Option "PreferredMode" "1920x1080"
Option "RightOf" "Monitor2"
EndSection
Section "Device"
Identifier "Device0"
Driver "intel"
VendorName "Intel"
BoardName "IGS"
BusID "PCI:0:2:0"
Option "monitor-LVDS1" "Monitor3"
Option "monitor-VGA1" "Monitor2"
Option "MergedFB" "false"
Option "ZaphodHeads" "LVDS1"
EndSection
Section "Device"
Identifier "Device1"
Driver "intel"
VendorName "Intel"
BoardName "IGS"
BusID "PCI:0:2:0"
Option "monitor-LVDS1" "Monitor3"
Option "monitor-VGA1" "Monitor2"
Option "MergedFB" "false"
Option "ZaphodHeads" "VGA1"
EndSection
Section "Device"
Identifier "Device2"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "NVS 4200M"
BusID "PCI:1:0:0"
Screen 0
EndSection
Section "Device"
Identifier "Device3"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "NVS 4200M"
BusID "PCI:1:0:0"
Screen 1
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device2"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "TwinViewXineramaInfoOrder" "DFP-4, DFP-2"
Option "metamodes" "DFP-4: nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Device3"
Monitor "Monitor1"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "DFP-2: nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen2"
Device "Device0"
Monitor "Monitor2"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1440x900"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen3"
Device "Device1"
Monitor "Monitor3"
SubSection "Display"
Depth 24
Modes "1920x1080"
EndSubSection
EndSection
Thanks in advance.
David_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
