On Fri, 31 Aug 2012 20:12:54 +0200
Daniel Vetter <daniel.vet...@ffwll.ch> wrote:
> ... let's see whether this catches anything earlier and I can track
> down a few bugs.
>
> v2: Add more checks and also add DRM_DEBUG_KMS output so that it's
> clear which connector/encoder/crtc is being checked atm. Which proved
> rather useful for debugging ...
>
> v3: Add a WARN in the common encoder dpms function, now that also
> modeset changes properly update the dpms state ...
>
> v4: Properly add a short explanation for each WARN, to avoid the need
> to correlate dmesg lines with source lines accurately. Suggested by
> Chris Wilson.
>
> v5: Also dump (expected, found) for state checks (or wherever it's not
> apparent from the test what exactly mismatches with expectations).
> Again suggested by Chris Wilson.
>
> v6: Due to an issue reported by Paulo Zanoni I've noticed that the
> encoder checking is by far not as strict as it could and should be.
> Improve this.
>
> Signed-Off-by: Daniel Vetter <daniel.vet...@ffwll.ch>
> ---
> drivers/gpu/drm/i915/intel_display.c | 104
> ++++++++++++++++++++++++++++++++++-
> 1 file changed, 103 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_display.c
> b/drivers/gpu/drm/i915/intel_display.c
> index 5c672ed..e703413 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -3637,7 +3637,7 @@ void intel_connector_dpms(struct drm_connector
> *connector, int mode)
> if (encoder->base.crtc)
> intel_encoder_dpms(encoder, mode);
> else
> - encoder->connectors_active = false;
> + WARN_ON(encoder->connectors_active != false);
>
> intel_connector_check_state(to_intel_connector(connector));
> }
> @@ -6872,6 +6872,104 @@ intel_modeset_update_state(struct drm_device *dev,
> unsigned prepare_pipes)
> base.head) \
> if (mask & (1 <<(intel_crtc)->pipe)) \
>
> +static void
> +intel_modeset_check_state(struct drm_device *dev)
> +{
> + struct intel_crtc *crtc;
> + struct intel_encoder *encoder;
> + struct intel_connector *connector;
> +
> + list_for_each_entry(connector, &dev->mode_config.connector_list,
> + base.head) {
> + /* This also checks the encoder/connector hw state with the
> + * ->get_hw_state callbacks. */
> + intel_connector_check_state(connector);
> +
> + WARN(&connector->new_encoder->base != connector->base.encoder,
> + "connector's staged encoder doesn't match current
> encoder\n");
> + }
> +
> + list_for_each_entry(encoder, &dev->mode_config.encoder_list,
> + base.head) {
> + bool enabled = false;
> + bool active = false;
> + enum pipe pipe, tracked_pipe;
> +
> + DRM_DEBUG_KMS("[ENCODER:%d:%s]\n",
> + encoder->base.base.id,
> + drm_get_encoder_name(&encoder->base));
> +
> + WARN(&encoder->new_crtc->base != encoder->base.crtc,
> + "encoder's stage crtc doesn't match current crtc\n");
> + WARN(encoder->connectors_active && !encoder->base.crtc,
> + "encoder's active_connectors set, but no crtc\n");
> +
> + list_for_each_entry(connector, &dev->mode_config.connector_list,
> + base.head) {
> + if (connector->base.encoder != &encoder->base)
> + continue;
> + enabled = true;
> + if (connector->base.dpms != DRM_MODE_DPMS_OFF)
> + active = true;
> + }
> + WARN(!!encoder->base.crtc != enabled,
> + "encoder's enabled state mismatch "
> + "(expected %i, found %i)\n",
> + !!encoder->base.crtc, enabled);
> + WARN(active && !encoder->base.crtc,
> + "active encoder with no crtc\n");
> +
> + WARN(encoder->connectors_active != active,
> + "encoder's computed active state doesn't match tracked
> active state "
> + "(expected %i, found %i)\n", active,
> encoder->connectors_active);
> +
> + active = encoder->get_hw_state(encoder, &pipe);
> + WARN(active != encoder->connectors_active,
> + "encoder's hw state doesn't match sw tracking "
> + "(expected %i, found %i)\n",
> + encoder->connectors_active, active);
> +
> + if (!encoder->base.crtc)
> + continue;
> +
> + tracked_pipe = to_intel_crtc(encoder->base.crtc)->pipe;
> + WARN(active && pipe != tracked_pipe,
> + "active encoder's pipe doesn't match"
> + "(expected %i, found %i)\n",
> + tracked_pipe, pipe);
> +
> + }
> +
> + list_for_each_entry(crtc, &dev->mode_config.crtc_list,
> + base.head) {
> + bool enabled = false;
> + bool active = false;
> +
> + DRM_DEBUG_KMS("[CRTC:%d]\n",
> + crtc->base.base.id);
> +
> + WARN(crtc->active && !crtc->base.enabled,
> + "active crtc, but not enabled in sw tracking\n");
> +
> + list_for_each_entry(encoder, &dev->mode_config.encoder_list,
> + base.head) {
> + if (encoder->base.crtc != &crtc->base)
> + continue;
> + enabled = true;
> + if (encoder->connectors_active)
> + active = true;
> + }
> + WARN(active != crtc->active,
> + "crtc's computed active state doesn't match tracked active
> state "
> + "(expected %i, found %i)\n", active, crtc->active);
> + WARN(enabled != crtc->base.enabled,
> + "crtc's computed enabled state doesn't match tracked
> enabled state "
> + "(expected %i, found %i)\n", enabled, crtc->base.enabled);
> +
> + assert_pipe(dev->dev_private, crtc->pipe, crtc->active);
> + }
> +}
> +
> bool intel_set_mode(struct drm_crtc *crtc,
> struct drm_display_mode *mode,
> int x, int y, struct drm_framebuffer *fb)
> @@ -6969,6 +7067,8 @@ done:
> if (!ret && crtc->enabled) {
> crtc->hwmode = saved_hwmode;
> crtc->mode = saved_mode;
> + } else {
> + intel_modeset_check_state(dev);
> }
>
> return ret;
> @@ -8166,6 +8266,8 @@ void intel_modeset_setup_hw_state(struct drm_device
> *dev)
> }
>
> intel_modeset_update_staged_output_state(dev);
> +
> + intel_modeset_check_state(dev);
> }
>
> void intel_modeset_gem_init(struct drm_device *dev)
Nice, should help us catch lots of issues.
Reviewed-by: Jesse Barnes <jbar...@virtuousgeek.org>
--
Jesse Barnes, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
