On Mon, 20 Feb 2017 15:08:45 +0100
Hans de Goede <hdego...@redhat.com> wrote:
> For v3 VBTs in vid-mode the delays are part of the VBT sequences, so
> we should not also delay ourselves otherwise we get double delays.
>
> Signed-off-by: Hans de Goede <hdego...@redhat.com>
> ---
> drivers/gpu/drm/i915/intel_dsi.c | 19 +++++++++++++++----
> 1 file changed, 15 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_dsi.c
> b/drivers/gpu/drm/i915/intel_dsi.c
> index a001e43..9e858c7 100644
> --- a/drivers/gpu/drm/i915/intel_dsi.c
> +++ b/drivers/gpu/drm/i915/intel_dsi.c
> @@ -552,6 +552,17 @@ static void intel_dsi_prepare(struct intel_encoder
> *intel_encoder,
> struct intel_crtc_state *pipe_config);
> static void intel_dsi_unprepare(struct intel_encoder *encoder);
>
> +static void intel_dsi_msleep(struct intel_dsi *intel_dsi, int msec)
> +{
> + struct drm_i915_private *dev_priv = to_i915(intel_dsi->base.base.dev);
> +
> + /* For v3 VBTs in vid-mode the delays are part of the VBT sequences */
> + if (is_vid_mode(intel_dsi) && dev_priv->vbt.dsi.seq_version >= 3)
> + return;
> +
> + msleep(msec);
> +}
> +
> /*
> * Panel enable/disable sequences from the VBT spec.
> *
> @@ -664,7 +675,7 @@ static void intel_dsi_pre_enable(struct intel_encoder
> *encoder,
> if (intel_dsi->gpio_panel)
> gpiod_set_value_cansleep(intel_dsi->gpio_panel, 1);
> intel_dsi_exec_vbt_sequence(intel_dsi, MIPI_SEQ_POWER_ON);
> - msleep(intel_dsi->panel_on_delay);
> + intel_dsi_msleep(intel_dsi, intel_dsi->panel_on_delay);
>
> /* Deassert reset */
> intel_dsi_exec_vbt_sequence(intel_dsi, MIPI_SEQ_DEASSERT_RESET);
> @@ -686,7 +697,7 @@ static void intel_dsi_pre_enable(struct intel_encoder
> *encoder,
> msleep(20); /* XXX */
> for_each_dsi_port(port, intel_dsi->ports)
> dpi_send_cmd(intel_dsi, TURN_ON, false, port);
> - msleep(100);
> + intel_dsi_msleep(intel_dsi, 100);
>
> intel_dsi_exec_vbt_sequence(intel_dsi, MIPI_SEQ_DISPLAY_ON);
>
> @@ -805,7 +816,7 @@ static void intel_dsi_post_disable(struct intel_encoder
> *encoder,
> intel_dsi_exec_vbt_sequence(intel_dsi, MIPI_SEQ_ASSERT_RESET);
>
> /* Power off, try both CRC pmic gpio and VBT */
> - msleep(intel_dsi->panel_off_delay);
> + intel_dsi_msleep(intel_dsi, intel_dsi->panel_off_delay);
> intel_dsi_exec_vbt_sequence(intel_dsi, MIPI_SEQ_POWER_OFF);
> if (intel_dsi->gpio_panel)
> gpiod_set_value_cansleep(intel_dsi->gpio_panel, 0);
> @@ -814,7 +825,7 @@ static void intel_dsi_post_disable(struct intel_encoder
> *encoder,
> * FIXME As we do with eDP, just make a note of the time here
> * and perform the wait before the next panel power on.
> */
Should this comment be updated now?
Otherwise
Reviewed-by: Bob Paauwe <bob.j.paa...@intel.com>
> - msleep(intel_dsi->panel_pwr_cycle_delay);
> + intel_dsi_msleep(intel_dsi, intel_dsi->panel_pwr_cycle_delay);
> }
>
> static bool intel_dsi_get_hw_state(struct intel_encoder *encoder,
--
--
Bob Paauwe
bob.j.paa...@intel.com
IOTG / PED Software Organization
Intel Corp. Folsom, CA
(916) 356-6193
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
