On 2/17/2017 at 2:30 PM, "Jani Nikula" <jani.nik...@linux.intel.com> wrote: > >On Fri, 17 Feb 2017, Eric Johansson <eric.johans...@hush.com> >wrote: >> Hello, >> >> I have an HP EliteOne 800 G2 AiO which according to "lspci -v" >has a >> Intel Corporation Sky Lake Integrated Graphics (rev 06). I have >> previously installed Ubuntu 16.04.1 LTS with kernel 4.4 on the >> computer and today also installed Ubuntu 16.04.2 LTS (clean >install >> from a USB memory) which has kernel 4.8.0-36-generic. If I >understand >> things right there should be new graphic hardware support in >16.04.2. >> >> Unfortunately, for both 16.04.2 and 16.04.1 I have the same >problem >> which is that the screen is split in half so that the whole >desktop is >> squeezed into the upper half of the screen. Do you have any idea >how >> to get the graphics working? Thanks in advance! > >Try disabling legacy boot and switching to UEFI boot in the BIOS >settings. > >Relevant bug report >https://bugs.freedesktop.org/show_bug.cgi?id=97822
Thanks, however, I probably did something stupid since it didn't work for me. I went into BIOS: F10 > BIOS Setup > Advanced > Secure Boot Configuration - here I changed "Legacy Support Enable and Secure Boot Disable" to "Legacy Support Disable and Secure Boot Disable". When I then try to boot the system I get "BootDevice Not Found. Please install an operating system on your hard disk. Hard Disk - (3F0)". If I try to boot the system from a USB memory to install Linux again I cannot do it since if I press F9 for boot menu it is just blank. It suggest a hard disk check and the quick test shows no errors. When I switch back to "Legacy Support Enable and Secure Boot Disable" the installed system boots Linux as before (with the same graphics problem as before of course). Any idea what I am doing wrong? Best regards, Eric _______________________________________________ Intel-gfx mailing list Intel-gfx@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/intel-gfx
