On Fri, Feb 10, 2017 at 03:29:54PM +0200, Ander Conselvan de Oliveira wrote:
> The aux power domain only makes sense in the DP code. Storing it in
> struct intel_dp avoids some indirection.
>
> v2: Rebase
> Signed-off-by: Ander Conselvan de Oliveira
> <ander.conselvan.de.olive...@intel.com>
> ---
> drivers/gpu/drm/i915/intel_display.c | 50 -----------------------------
> drivers/gpu/drm/i915/intel_dp.c | 61
> ++++++++++++++----------------------
> drivers/gpu/drm/i915/intel_drv.h | 3 +-
> 3 files changed, 24 insertions(+), 90 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_display.c
> b/drivers/gpu/drm/i915/intel_display.c
> index ab78df9..1e70776 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -5589,26 +5589,6 @@ static enum intel_display_power_domain
> port_to_power_domain(enum port port)
> }
> }
>
> -static enum intel_display_power_domain port_to_aux_power_domain(enum port
> port)
> -{
> - switch (port) {
> - case PORT_A:
> - return POWER_DOMAIN_AUX_A;
> - case PORT_B:
> - return POWER_DOMAIN_AUX_B;
> - case PORT_C:
> - return POWER_DOMAIN_AUX_C;
> - case PORT_D:
> - return POWER_DOMAIN_AUX_D;
> - case PORT_E:
> - /* FIXME: Check VBT for actual wiring of PORT E */
> - return POWER_DOMAIN_AUX_D;
> - default:
> - MISSING_CASE(port);
> - return POWER_DOMAIN_AUX_A;
> - }
> -}
> -
> enum intel_display_power_domain
> intel_display_port_power_domain(struct intel_encoder *intel_encoder)
> {
> @@ -5636,36 +5616,6 @@ intel_display_port_power_domain(struct intel_encoder
> *intel_encoder)
> }
> }
>
> -enum intel_display_power_domain
> -intel_display_port_aux_power_domain(struct intel_encoder *intel_encoder)
> -{
> - struct drm_i915_private *dev_priv = to_i915(intel_encoder->base.dev);
> - struct intel_digital_port *intel_dig_port;
> -
> - switch (intel_encoder->type) {
> - case INTEL_OUTPUT_UNKNOWN:
> - case INTEL_OUTPUT_HDMI:
> - /*
> - * Only DDI platforms should ever use these output types.
> - * We can get here after the HDMI detect code has already set
> - * the type of the shared encoder. Since we can't be sure
> - * what's the status of the given connectors, play safe and
> - * run the DP detection too.
> - */
> - WARN_ON_ONCE(!HAS_DDI(dev_priv));
> - case INTEL_OUTPUT_DP:
> - case INTEL_OUTPUT_EDP:
> - intel_dig_port = enc_to_dig_port(&intel_encoder->base);
> - return port_to_aux_power_domain(intel_dig_port->port);
> - case INTEL_OUTPUT_DP_MST:
> - intel_dig_port = enc_to_mst(&intel_encoder->base)->primary;
> - return port_to_aux_power_domain(intel_dig_port->port);
I was wondering where the dp->aux_power_domain gets inited for the MST case,
but looks like this case could never happen even now. The patch looks ok:
Reviewed-by: Imre Deak <imre.d...@intel.com>
> - default:
> - MISSING_CASE(intel_encoder->type);
> - return POWER_DOMAIN_AUX_A;
> - }
> -}
> -
> static u64 get_crtc_power_domains(struct drm_crtc *crtc,
> struct intel_crtc_state *crtc_state)
> {
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index fa77e96..e2e4766 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -396,14 +396,12 @@ static void pps_lock(struct intel_dp *intel_dp)
> struct intel_encoder *encoder = &intel_dig_port->base;
> struct drm_device *dev = encoder->base.dev;
> struct drm_i915_private *dev_priv = to_i915(dev);
> - enum intel_display_power_domain power_domain;
>
> /*
> * See vlv_power_sequencer_reset() why we need
> * a power domain reference here.
> */
> - power_domain = intel_display_port_aux_power_domain(encoder);
> - intel_display_power_get(dev_priv, power_domain);
> + intel_display_power_get(dev_priv, intel_dp->aux_power_domain);
>
> mutex_lock(&dev_priv->pps_mutex);
> }
> @@ -414,12 +412,10 @@ static void pps_unlock(struct intel_dp *intel_dp)
> struct intel_encoder *encoder = &intel_dig_port->base;
> struct drm_device *dev = encoder->base.dev;
> struct drm_i915_private *dev_priv = to_i915(dev);
> - enum intel_display_power_domain power_domain;
>
> mutex_unlock(&dev_priv->pps_mutex);
>
> - power_domain = intel_display_port_aux_power_domain(encoder);
> - intel_display_power_put(dev_priv, power_domain);
> + intel_display_power_put(dev_priv, intel_dp->aux_power_domain);
> }
>
> static void
> @@ -2005,9 +2001,7 @@ static bool edp_panel_vdd_on(struct intel_dp *intel_dp)
> {
> struct drm_device *dev = intel_dp_to_dev(intel_dp);
> struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
> - struct intel_encoder *intel_encoder = &intel_dig_port->base;
> struct drm_i915_private *dev_priv = to_i915(dev);
> - enum intel_display_power_domain power_domain;
> u32 pp;
> i915_reg_t pp_stat_reg, pp_ctrl_reg;
> bool need_to_disable = !intel_dp->want_panel_vdd;
> @@ -2023,8 +2017,7 @@ static bool edp_panel_vdd_on(struct intel_dp *intel_dp)
> if (edp_have_panel_vdd(intel_dp))
> return need_to_disable;
>
> - power_domain = intel_display_port_aux_power_domain(intel_encoder);
> - intel_display_power_get(dev_priv, power_domain);
> + intel_display_power_get(dev_priv, intel_dp->aux_power_domain);
>
> DRM_DEBUG_KMS("Turning eDP port %c VDD on\n",
> port_name(intel_dig_port->port));
> @@ -2082,8 +2075,6 @@ static void edp_panel_vdd_off_sync(struct intel_dp
> *intel_dp)
> struct drm_i915_private *dev_priv = to_i915(dev);
> struct intel_digital_port *intel_dig_port =
> dp_to_dig_port(intel_dp);
> - struct intel_encoder *intel_encoder = &intel_dig_port->base;
> - enum intel_display_power_domain power_domain;
> u32 pp;
> i915_reg_t pp_stat_reg, pp_ctrl_reg;
>
> @@ -2113,8 +2104,7 @@ static void edp_panel_vdd_off_sync(struct intel_dp
> *intel_dp)
> if ((pp & PANEL_POWER_ON) == 0)
> intel_dp->panel_power_off_time = ktime_get_boottime();
>
> - power_domain = intel_display_port_aux_power_domain(intel_encoder);
> - intel_display_power_put(dev_priv, power_domain);
> + intel_display_power_put(dev_priv, intel_dp->aux_power_domain);
> }
>
> static void edp_panel_vdd_work(struct work_struct *__work)
> @@ -2227,11 +2217,8 @@ void intel_edp_panel_on(struct intel_dp *intel_dp)
>
> static void edp_panel_off(struct intel_dp *intel_dp)
> {
> - struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
> - struct intel_encoder *intel_encoder = &intel_dig_port->base;
> struct drm_device *dev = intel_dp_to_dev(intel_dp);
> struct drm_i915_private *dev_priv = to_i915(dev);
> - enum intel_display_power_domain power_domain;
> u32 pp;
> i915_reg_t pp_ctrl_reg;
>
> @@ -2263,8 +2250,7 @@ static void edp_panel_off(struct intel_dp *intel_dp)
> wait_panel_off(intel_dp);
>
> /* We got a reference when we enabled the VDD. */
> - power_domain = intel_display_port_aux_power_domain(intel_encoder);
> - intel_display_power_put(dev_priv, power_domain);
> + intel_display_power_put(dev_priv, intel_dp->aux_power_domain);
> }
>
> void intel_edp_panel_off(struct intel_dp *intel_dp)
> @@ -4587,11 +4573,9 @@ intel_dp_long_pulse(struct intel_connector
> *intel_connector)
> struct intel_encoder *intel_encoder = &intel_dig_port->base;
> struct drm_device *dev = connector->dev;
> enum drm_connector_status status;
> - enum intel_display_power_domain power_domain;
> u8 sink_irq_vector = 0;
>
> - power_domain = intel_display_port_aux_power_domain(intel_encoder);
> - intel_display_power_get(to_i915(dev), power_domain);
> + intel_display_power_get(to_i915(dev), intel_dp->aux_power_domain);
>
> /* Can't disconnect eDP, but you can close the lid... */
> if (is_edp(intel_dp))
> @@ -4688,7 +4672,7 @@ intel_dp_long_pulse(struct intel_connector
> *intel_connector)
> if (status != connector_status_connected && !intel_dp->is_mst)
> intel_dp_unset_edid(intel_dp);
>
> - intel_display_power_put(to_i915(dev), power_domain);
> + intel_display_power_put(to_i915(dev), intel_dp->aux_power_domain);
> return status;
> }
>
> @@ -4716,7 +4700,6 @@ intel_dp_force(struct drm_connector *connector)
> struct intel_dp *intel_dp = intel_attached_dp(connector);
> struct intel_encoder *intel_encoder = &dp_to_dig_port(intel_dp)->base;
> struct drm_i915_private *dev_priv = to_i915(intel_encoder->base.dev);
> - enum intel_display_power_domain power_domain;
>
> DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
> connector->base.id, connector->name);
> @@ -4725,12 +4708,11 @@ intel_dp_force(struct drm_connector *connector)
> if (connector->status != connector_status_connected)
> return;
>
> - power_domain = intel_display_port_aux_power_domain(intel_encoder);
> - intel_display_power_get(dev_priv, power_domain);
> + intel_display_power_get(dev_priv, intel_dp->aux_power_domain);
>
> intel_dp_set_edid(intel_dp);
>
> - intel_display_power_put(dev_priv, power_domain);
> + intel_display_power_put(dev_priv, intel_dp->aux_power_domain);
>
> if (intel_encoder->type != INTEL_OUTPUT_EDP)
> intel_encoder->type = INTEL_OUTPUT_DP;
> @@ -4965,7 +4947,6 @@ static void intel_edp_panel_vdd_sanitize(struct
> intel_dp *intel_dp)
> struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
> struct drm_device *dev = intel_dig_port->base.base.dev;
> struct drm_i915_private *dev_priv = to_i915(dev);
> - enum intel_display_power_domain power_domain;
>
> lockdep_assert_held(&dev_priv->pps_mutex);
>
> @@ -4979,8 +4960,7 @@ static void intel_edp_panel_vdd_sanitize(struct
> intel_dp *intel_dp)
> * indefinitely.
> */
> DRM_DEBUG_KMS("VDD left on by BIOS, adjusting state tracking\n");
> - power_domain =
> intel_display_port_aux_power_domain(&intel_dig_port->base);
> - intel_display_power_get(dev_priv, power_domain);
> + intel_display_power_get(dev_priv, intel_dp->aux_power_domain);
>
> edp_panel_vdd_schedule_off(intel_dp);
> }
> @@ -5052,10 +5032,8 @@ enum irqreturn
> intel_dp_hpd_pulse(struct intel_digital_port *intel_dig_port, bool long_hpd)
> {
> struct intel_dp *intel_dp = &intel_dig_port->dp;
> - struct intel_encoder *intel_encoder = &intel_dig_port->base;
> struct drm_device *dev = intel_dig_port->base.base.dev;
> struct drm_i915_private *dev_priv = to_i915(dev);
> - enum intel_display_power_domain power_domain;
> enum irqreturn ret = IRQ_NONE;
>
> if (intel_dig_port->base.type != INTEL_OUTPUT_EDP &&
> @@ -5083,8 +5061,7 @@ intel_dp_hpd_pulse(struct intel_digital_port
> *intel_dig_port, bool long_hpd)
> return IRQ_NONE;
> }
>
> - power_domain = intel_display_port_aux_power_domain(intel_encoder);
> - intel_display_power_get(dev_priv, power_domain);
> + intel_display_power_get(dev_priv, intel_dp->aux_power_domain);
>
> if (intel_dp->is_mst) {
> if (intel_dp_check_mst_status(intel_dp) == -EINVAL) {
> @@ -5112,7 +5089,7 @@ intel_dp_hpd_pulse(struct intel_digital_port
> *intel_dig_port, bool long_hpd)
> ret = IRQ_HANDLED;
>
> put_power:
> - intel_display_power_put(dev_priv, power_domain);
> + intel_display_power_put(dev_priv, intel_dp->aux_power_domain);
>
> return ret;
> }
> @@ -5903,27 +5880,35 @@ static bool intel_edp_init_connector(struct intel_dp
> *intel_dp,
> return false;
> }
>
> +/* Set up the hotplug pin and aux power domain. */
> static void
> intel_dp_init_connector_port_info(struct intel_digital_port *intel_dig_port)
> {
> struct intel_encoder *encoder = &intel_dig_port->base;
> + struct intel_dp *intel_dp = &intel_dig_port->dp;
>
> - /* Set up the hotplug pin. */
> switch (intel_dig_port->port) {
> case PORT_A:
> encoder->hpd_pin = HPD_PORT_A;
> + intel_dp->aux_power_domain = POWER_DOMAIN_AUX_A;
> break;
> case PORT_B:
> encoder->hpd_pin = HPD_PORT_B;
> + intel_dp->aux_power_domain = POWER_DOMAIN_AUX_B;
> break;
> case PORT_C:
> encoder->hpd_pin = HPD_PORT_C;
> + intel_dp->aux_power_domain = POWER_DOMAIN_AUX_C;
> break;
> case PORT_D:
> encoder->hpd_pin = HPD_PORT_D;
> + intel_dp->aux_power_domain = POWER_DOMAIN_AUX_D;
> break;
> case PORT_E:
> encoder->hpd_pin = HPD_PORT_E;
> +
> + /* FIXME: Check VBT for actual wiring of PORT E */
> + intel_dp->aux_power_domain = POWER_DOMAIN_AUX_D;
> break;
> default:
> MISSING_CASE(intel_dig_port->port);
> @@ -6003,6 +5988,8 @@ intel_dp_init_connector(struct intel_digital_port
> *intel_dig_port,
> connector->interlace_allowed = true;
> connector->doublescan_allowed = 0;
>
> + intel_dp_init_connector_port_info(intel_dig_port);
> +
> intel_dp_aux_init(intel_dp);
>
> INIT_DELAYED_WORK(&intel_dp->panel_vdd_work,
> @@ -6015,8 +6002,6 @@ intel_dp_init_connector(struct intel_digital_port
> *intel_dig_port,
> else
> intel_connector->get_hw_state = intel_connector_get_hw_state;
>
> - intel_dp_init_connector_port_info(intel_dig_port);
> -
> /* init MST on ports that can support it */
> if (HAS_DP_MST(dev_priv) && !is_edp(intel_dp) &&
> (port == PORT_B || port == PORT_C || port == PORT_D))
> diff --git a/drivers/gpu/drm/i915/intel_drv.h
> b/drivers/gpu/drm/i915/intel_drv.h
> index 6e37fba..3ddeaa6 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -950,6 +950,7 @@ struct intel_dp {
> /* sink or branch descriptor */
> struct intel_dp_desc desc;
> struct drm_dp_aux aux;
> + enum intel_display_power_domain aux_power_domain;
> uint8_t train_set[4];
> int panel_power_up_delay;
> int panel_power_down_delay;
> @@ -1421,8 +1422,6 @@ void hsw_enable_ips(struct intel_crtc *crtc);
> void hsw_disable_ips(struct intel_crtc *crtc);
> enum intel_display_power_domain
> intel_display_port_power_domain(struct intel_encoder *intel_encoder);
> -enum intel_display_power_domain
> -intel_display_port_aux_power_domain(struct intel_encoder *intel_encoder);
> void intel_mode_from_pipe_config(struct drm_display_mode *mode,
> struct intel_crtc_state *pipe_config);
>
> --
> 2.9.3
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
