From: Deepak M <m.dee...@intel.com>
PLL divider range for GLK is different than that of
BXT, hence adding the GLK range check in this patch.
v2: Code restructure using min and max ratio variables (Ander)
Signed-off-by: Deepak M <m.dee...@intel.com>
Signed-off-by: Madhav Chauhan <madhav.chau...@intel.com>
---
drivers/gpu/drm/i915/i915_reg.h | 4 ++++
drivers/gpu/drm/i915/intel_dsi_pll.c | 24 +++++++++++++++++-------
2 files changed, 21 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index c09f665..2cd7ff7 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -8348,10 +8348,12 @@ enum {
#define BXT_DSI_PLL_PVD_RATIO_SHIFT 16
#define BXT_DSI_PLL_PVD_RATIO_MASK (3 << BXT_DSI_PLL_PVD_RATIO_SHIFT)
#define BXT_DSI_PLL_PVD_RATIO_1 (1 << BXT_DSI_PLL_PVD_RATIO_SHIFT)
+#define BXT_DSIC_16X_BY1 (0 << 10)
#define BXT_DSIC_16X_BY2 (1 << 10)
#define BXT_DSIC_16X_BY3 (2 << 10)
#define BXT_DSIC_16X_BY4 (3 << 10)
#define BXT_DSIC_16X_MASK (3 << 10)
+#define BXT_DSIA_16X_BY1 (0 << 8)
#define BXT_DSIA_16X_BY2 (1 << 8)
#define BXT_DSIA_16X_BY3 (2 << 8)
#define BXT_DSIA_16X_BY4 (3 << 8)
@@ -8361,6 +8363,8 @@ enum {
#define BXT_DSI_PLL_RATIO_MAX 0x7D
#define BXT_DSI_PLL_RATIO_MIN 0x22
+#define GLK_DSI_PLL_RATIO_MAX 0x6F
+#define GLK_DSI_PLL_RATIO_MIN 0x22
#define BXT_DSI_PLL_RATIO_MASK 0xFF
#define BXT_REF_CLOCK_KHZ 19200
diff --git a/drivers/gpu/drm/i915/intel_dsi_pll.c
b/drivers/gpu/drm/i915/intel_dsi_pll.c
index 61440e5..e6383cb 100644
--- a/drivers/gpu/drm/i915/intel_dsi_pll.c
+++ b/drivers/gpu/drm/i915/intel_dsi_pll.c
@@ -430,11 +430,12 @@ static void bxt_dsi_program_clocks(struct drm_device
*dev, enum port port,
I915_WRITE(BXT_MIPI_CLOCK_CTL, tmp);
}
-static int bxt_compute_dsi_pll(struct intel_encoder *encoder,
+static int gen9lp_compute_dsi_pll(struct intel_encoder *encoder,
struct intel_crtc_state *config)
{
+ struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
- u8 dsi_ratio;
+ u8 dsi_ratio, dsi_ratio_min, dsi_ratio_max;
u32 dsi_clk;
dsi_clk = dsi_clk_from_pclk(intel_dsi->pclk, intel_dsi->pixel_format,
@@ -446,11 +447,20 @@ static int bxt_compute_dsi_pll(struct intel_encoder
*encoder,
* round 'up' the result
*/
dsi_ratio = DIV_ROUND_UP(dsi_clk * 2, BXT_REF_CLOCK_KHZ);
- if (dsi_ratio < BXT_DSI_PLL_RATIO_MIN ||
- dsi_ratio > BXT_DSI_PLL_RATIO_MAX) {
+
+ if (IS_BROXTON(dev_priv)) {
+ dsi_ratio_min = BXT_DSI_PLL_RATIO_MIN;
+ dsi_ratio_max = BXT_DSI_PLL_RATIO_MAX;
+ } else if (IS_GEMINILAKE(dev_priv)) {
+ dsi_ratio_min = GLK_DSI_PLL_RATIO_MIN;
+ dsi_ratio_max = GLK_DSI_PLL_RATIO_MAX;
+ }
+
+ if (dsi_ratio < dsi_ratio_min || dsi_ratio > dsi_ratio_max) {
DRM_ERROR("Cant get a suitable ratio from DSI PLL ratios\n");
return -ECHRNG;
- }
+ } else
+ DRM_DEBUG_KMS("DSI PLL calculation is Done!!\n");
/*
* Program DSI ratio and Select MIPIC and MIPIA PLL output as 8x
@@ -462,7 +472,7 @@ static int bxt_compute_dsi_pll(struct intel_encoder
*encoder,
/* As per recommendation from hardware team,
* Prog PVD ratio =1 if dsi ratio <= 50
*/
- if (dsi_ratio <= 50)
+ if (IS_BROXTON(dev_priv) && dsi_ratio <= 50)
config->dsi_pll.ctrl |= BXT_DSI_PLL_PVD_RATIO_1;
return 0;
@@ -522,7 +532,7 @@ int intel_compute_dsi_pll(struct intel_encoder *encoder,
if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
return vlv_compute_dsi_pll(encoder, config);
else if (IS_GEN9_LP(dev_priv))
- return bxt_compute_dsi_pll(encoder, config);
+ return gen9lp_compute_dsi_pll(encoder, config);
return -ENODEV;
}
--
1.9.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
