Reviewed-by: Rodrigo Vivi <rodrigo.v...@intel.com>
On Fri, 2017-01-13 at 00:31 +0530, vathsala nagaraju wrote:
> As per bpsec, CHICKEN_TRANS_EDP bit 12 ,15 must be programmed in
> psr2 enable sequence.
> bit 12 : Program Transcoder EDP VSC DIP header with a valid setting for
> PSR2 and Set CHICKEN_TRANS_EDP(0x420cc) bit 12 for programmable
> header packet.
> bit 15 : Set CHICKEN_TRANS_EDP(0x420cc) bit 15 if Y coordinate is supported
>
> v2: (Rodrigo)
> - move CHICKEN_TRANS_EDP bit set logic right after setup_vsc
>
> v3:(Rodrigo)
> - initialize chicken_trans to CHICKEN_TRANS_BIT12 instead of 0
>
> v4:(chris wilson)
> - use BIT(12), remove CHICKEN_TRANS_BIT12
> - remove unnecessary comments
> - update commit message
>
> v5:
> - rename bit 12 PSR2_VSC_ENABLE_PROG_HEADER
> - rename bit 15 PSR2_ADD_VERTICAL_LINE_COUNT
>
> v6:(Rodrigo)
> - remove TRANS_EDP=3, use cpu_transcoder
>
> Cc: Rodrigo Vivi <rodrigo.v...@intel.com>
> Cc: Jim Bride <jim.br...@linux.intel.com>
> Signed-off-by: vathsala nagaraju <vathsala.nagar...@intel.com>
> Signed-off-by: Patil Deepti <deepti.pa...@intel.com>
> ---
> drivers/gpu/drm/i915/i915_reg.h | 6 ++++++
> drivers/gpu/drm/i915/intel_psr.c | 7 +++++++
> 2 files changed, 13 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 7830e6e..c9c1ccd 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -6449,6 +6449,12 @@ enum {
> #define BDW_DPRS_MASK_VBLANK_SRD (1 << 0)
> #define CHICKEN_PIPESL_1(pipe) _MMIO_PIPE(pipe, _CHICKEN_PIPESL_1_A,
> _CHICKEN_PIPESL_1_B)
>
> +#define CHICKEN_TRANS_A 0x420c0
> +#define CHICKEN_TRANS_B 0x420c4
> +#define CHICKEN_TRANS(trans) _MMIO_TRANS(trans, CHICKEN_TRANS_A,
> CHICKEN_TRANS_B)
> +#define PSR2_VSC_ENABLE_PROG_HEADER (1<<12)
> +#define PSR2_ADD_VERTICAL_LINE_COUNT (1<<15)
> +
> #define DISP_ARB_CTL _MMIO(0x45000)
> #define DISP_FBC_MEMORY_WAKE (1<<31)
> #define DISP_TILE_SURFACE_SWIZZLING (1<<13)
> diff --git a/drivers/gpu/drm/i915/intel_psr.c
> b/drivers/gpu/drm/i915/intel_psr.c
> index 36c4045..935402e 100644
> --- a/drivers/gpu/drm/i915/intel_psr.c
> +++ b/drivers/gpu/drm/i915/intel_psr.c
> @@ -480,6 +480,9 @@ void intel_psr_enable(struct intel_dp *intel_dp)
> struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
> struct drm_device *dev = intel_dig_port->base.base.dev;
> struct drm_i915_private *dev_priv = to_i915(dev);
> + struct intel_crtc *crtc = to_intel_crtc(intel_dig_port->base.base.crtc);
> + enum transcoder cpu_transcoder = crtc->config->cpu_transcoder;
> + u32 chicken;
>
> if (!HAS_PSR(dev_priv)) {
> DRM_DEBUG_KMS("PSR not supported on this platform\n");
> @@ -505,6 +508,10 @@ void intel_psr_enable(struct intel_dp *intel_dp)
> if (HAS_DDI(dev_priv)) {
> if (dev_priv->psr.psr2_support) {
> skl_psr_setup_su_vsc(intel_dp);
> + chicken = PSR2_VSC_ENABLE_PROG_HEADER;
> + if (dev_priv->psr.y_cord_support)
> + chicken |= PSR2_ADD_VERTICAL_LINE_COUNT;
> + I915_WRITE(CHICKEN_TRANS(cpu_transcoder), chicken);
> } else {
> /* set up vsc header for psr1 */
> hsw_psr_setup_vsc(intel_dp);
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
