> -----Original Message-----
> From: Takashi Iwai [mailto:ti...@suse.de]
> Sent: Wednesday, December 14, 2016 5:21 PM
> To: Anand, Jerome <jerome.an...@intel.com>
> Cc: intel-gfx@lists.freedesktop.org; alsa-de...@alsa-project.org;
> ville.syrj...@linux.intel.com; broo...@kernel.org; pierre-
> louis.boss...@linux.intel.com; Ughreja, Rakesh A
> <rakesh.a.ughr...@intel.com>
> Subject: Re: [PATCH 2/7] drm/i915: Add support for audio driver notifications
>
> On Mon, 12 Dec 2016 19:10:38 +0100,
> Jerome Anand wrote:
> >
> > Notifiations like mode change, hot plug and edid to the audio driver
> > are added. This is inturn used by the audio driver for its
> > functionality.
> >
> > A new interface file capturing the notifications needed by the audio
> > driver is added
> >
> > Signed-off-by: Pierre-Louis Bossart
> > <pierre-louis.boss...@linux.intel.com>
> > Signed-off-by: Jerome Anand <jerome.an...@intel.com>
> > ---
> > drivers/gpu/drm/i915/i915_drv.h | 3 +++
> > drivers/gpu/drm/i915/intel_audio.c | 8 ++++++
> > drivers/gpu/drm/i915/intel_hdmi.c | 1 +
> > drivers/gpu/drm/i915/intel_lpe_audio.c | 46
> ++++++++++++++++++++++++++++++++++
> > include/drm/intel_lpe_audio.h | 1 +
> > 5 files changed, 59 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/i915/i915_drv.h
> > b/drivers/gpu/drm/i915/i915_drv.h index 1317834..0dbe91a 100644
> > --- a/drivers/gpu/drm/i915/i915_drv.h
> > +++ b/drivers/gpu/drm/i915/i915_drv.h
> > @@ -3696,6 +3696,9 @@ int intel_lpe_audio_setup(struct
> > drm_i915_private *dev_priv); void intel_lpe_audio_teardown(struct
> > drm_i915_private *dev_priv); void intel_lpe_audio_irq_handler(struct
> > drm_i915_private *dev_priv); bool intel_lpe_audio_detect(struct
> > drm_i915_private *dev_priv);
> > +void intel_lpe_audio_notify(struct drm_i915_private *dev_priv,
> > + void *eld, int port, int tmds_clk_speed,
> > + bool connected);
> >
> > /* intel_i2c.c */
> > extern int intel_setup_gmbus(struct drm_i915_private *dev_priv); diff
> > --git a/drivers/gpu/drm/i915/intel_audio.c
> > b/drivers/gpu/drm/i915/intel_audio.c
> > index 3bbc96c..77cd086 100644
> > --- a/drivers/gpu/drm/i915/intel_audio.c
> > +++ b/drivers/gpu/drm/i915/intel_audio.c
> > @@ -24,6 +24,7 @@
> > #include <linux/kernel.h>
> > #include <linux/component.h>
> > #include <drm/i915_component.h>
> > +#include <drm/intel_lpe_audio.h>
> > #include "intel_drv.h"
> >
> > #include <drm/drmP.h>
> > @@ -630,6 +631,10 @@ void intel_audio_codec_enable(struct
> intel_encoder *intel_encoder,
> > if (acomp && acomp->audio_ops && acomp->audio_ops-
> >pin_eld_notify)
> > acomp->audio_ops->pin_eld_notify(acomp->audio_ops-
> >audio_ptr,
> > (int) port, (int) pipe);
> > +
> > + if (HAS_LPE_AUDIO(dev_priv))
> > + intel_lpe_audio_notify(dev_priv, connector->eld, port,
> > + crtc_state->port_clock, true);
> > }
> >
> > /**
> > @@ -663,6 +668,9 @@ void intel_audio_codec_disable(struct
> intel_encoder *intel_encoder)
> > if (acomp && acomp->audio_ops && acomp->audio_ops-
> >pin_eld_notify)
> > acomp->audio_ops->pin_eld_notify(acomp->audio_ops-
> >audio_ptr,
> > (int) port, (int) pipe);
> > +
> > + if (HAS_LPE_AUDIO(dev_priv))
> > + intel_lpe_audio_notify(dev_priv, NULL, port, 0, true);
>
> Does it still notify as connected?
>
OK - this will be changed
>
> > }
> >
> > /**
> > diff --git a/drivers/gpu/drm/i915/intel_hdmi.c
> > b/drivers/gpu/drm/i915/intel_hdmi.c
> > index 0bcfead..377584e1 100644
> > --- a/drivers/gpu/drm/i915/intel_hdmi.c
> > +++ b/drivers/gpu/drm/i915/intel_hdmi.c
> > @@ -36,6 +36,7 @@
> > #include <drm/drm_edid.h>
> > #include "intel_drv.h"
> > #include <drm/i915_drm.h>
> > +#include <drm/intel_lpe_audio.h>
> > #include "i915_drv.h"
> >
> > static struct drm_device *intel_hdmi_to_dev(struct intel_hdmi
> > *intel_hdmi) diff --git a/drivers/gpu/drm/i915/intel_lpe_audio.c
> > b/drivers/gpu/drm/i915/intel_lpe_audio.c
> > index e12e5f7..a141a9c 100644
> > --- a/drivers/gpu/drm/i915/intel_lpe_audio.c
> > +++ b/drivers/gpu/drm/i915/intel_lpe_audio.c
> > @@ -361,3 +361,49 @@ void intel_lpe_audio_teardown(struct
> > drm_i915_private *dev_priv)
> >
> > spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); }
> > +
> > +
> > +/**
> > + * intel_lpe_audio_notify() - notify lpe audio event
> > + * audio driver and i915
> > + * @dev_priv: the i915 drm device private data
> > + * @eld : ELD data
> > + * @port: port id
> > + * @tmds_clk_speed: tmds clock frequency in Hz
> > + * @connected: hdmi connected/disconnected
> > + *
> > + * Notify lpe audio driver of eld change.
> > + */
> > +void intel_lpe_audio_notify(struct drm_i915_private *dev_priv,
> > + void *eld, int port, int tmds_clk_speed,
> > + bool connected)
> > +{
> > + unsigned long irq_flags;
> > +
> > + if (HAS_LPE_AUDIO(dev_priv)) {
>
> Just bail out here when !HAS_LPE_AUDIO(). Then the rest needs less
> indentation and will be more readable.
>
OK
> > + struct intel_hdmi_lpe_audio_pdata *pdata =
> dev_get_platdata(
> > + &(dev_priv->lpe_audio.platdev->dev));
> > +
> > + spin_lock_irqsave(&pdata->lpe_audio_slock,
> > + irq_flags);
> > +
> > + if (eld != NULL) {
> > + memcpy(pdata->eld.eld_data, eld,
> > + HDMI_MAX_ELD_BYTES);
> > + pdata->eld.port_id = port;
> > +
> > + if (tmds_clk_speed)
> > + pdata->tmds_clock_speed =
> > + tmds_clk_speed;
> > + }
>
> If eld==NULL means that no ELD is found (or disconnected), it's better to
> clear pdata eld as well, so that we don't leak the previous ELD.
>
OK
>
> > + pdata->hdmi_connected = connected;
> > + if (pdata->notify_audio_lpe)
> > + pdata->notify_audio_lpe(
> > + (eld != NULL) ? &pdata->eld : NULL);
> > + else
> > + pdata->notify_pending = true;
> > +
> > + spin_unlock_irqrestore(&pdata->lpe_audio_slock,
> > + irq_flags);
> > + }
> > +}
> > diff --git a/include/drm/intel_lpe_audio.h
> > b/include/drm/intel_lpe_audio.h index a64c449..952de05 100644
> > --- a/include/drm/intel_lpe_audio.h
> > +++ b/include/drm/intel_lpe_audio.h
> > @@ -25,6 +25,7 @@
> > #define _INTEL_LPE_AUDIO_H_
> >
> > #include <linux/types.h>
> > +#include <linux/spinlock_types.h>
>
> Why do we need to add a header at this point out of sudden?
>
It was for some warning removal. I'll try to remove this if not applicable now.
>
> thanks,
>
> Takashi
>
>
> >
> > #define HDMI_MAX_ELD_BYTES 128
> >
> > --
> > 2.9.3
> >
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
