From: Deepak M <m.dee...@intel.com>
v2: Addressed Jani's Review comments(renamed bit field macros)
Signed-off-by: Deepak M <m.dee...@intel.com>
Signed-off-by: Madhav Chauhan <madhav.chau...@intel.com>
---
drivers/gpu/drm/i915/intel_dsi.c | 134 +++++++++++++++++++++++++++++++++++++++
1 file changed, 134 insertions(+)
diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c
index b78c686..c0697e9 100644
--- a/drivers/gpu/drm/i915/intel_dsi.c
+++ b/drivers/gpu/drm/i915/intel_dsi.c
@@ -357,6 +357,134 @@ static bool intel_dsi_compute_config(struct intel_encoder
*encoder,
return true;
}
+static void intel_dsi_disable_mipiio(struct intel_encoder *encoder)
+{
+ struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+ struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
+ enum port port;
+ u32 tmp;
+
+ /* Put the IO into reset */
+ tmp = I915_READ(MIPI_CTRL(PORT_A));
+ tmp &= ~GLK_MIPIIO_RESET_RELEASED;
+ I915_WRITE(MIPI_CTRL(PORT_A), tmp);
+
+ /* Wait for MIPI PHY status bit to unset */
+ for_each_dsi_port(port, intel_dsi->ports) {
+ if (intel_wait_for_register(dev_priv,
+ MIPI_CTRL(port),
+ GLK_PHY_STATUS_PORT_READY, 0, 20))
+ DRM_ERROR("PHY is not turning OFF\n");
+ }
+
+ /* Clear MIPI mode */
+ for_each_dsi_port(port, intel_dsi->ports) {
+ tmp = I915_READ(MIPI_CTRL(port));
+ tmp &= ~GLK_MIPIIO_ENABLE;
+ I915_WRITE(MIPI_CTRL(port), tmp);
+ }
+}
+
+static void intel_dsi_enable_mipiio(struct intel_encoder *encoder)
+{
+ struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+ struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
+ enum port port;
+ u32 tmp, val;
+
+ /* Put the IO into reset */
+ tmp = I915_READ(MIPI_CTRL(PORT_A));
+ tmp &= ~GLK_MIPIIO_RESET_RELEASED;
+ I915_WRITE(MIPI_CTRL(PORT_A), tmp);
+
+ /* Program LP Wake */
+ for_each_dsi_port(port, intel_dsi->ports) {
+ tmp = I915_READ(MIPI_CTRL(port));
+ tmp &= ~GLK_LP_WAKE;
+ I915_WRITE(MIPI_CTRL(port), tmp);
+ }
+
+ /* Set the MIPI mode */
+ for_each_dsi_port(port, intel_dsi->ports) {
+ tmp = I915_READ(MIPI_CTRL(port));
+ I915_WRITE(MIPI_CTRL(port), tmp | GLK_MIPIIO_ENABLE);
+ }
+
+ /* Wait for Pwr ACK */
+ for_each_dsi_port(port, intel_dsi->ports) {
+ if (intel_wait_for_register(dev_priv,
+ MIPI_CTRL(port), GLK_MIPIIO_PORT_POWERED,
+ GLK_MIPIIO_PORT_POWERED, 20))
+ DRM_ERROR("Power ACK not received\n");
+ }
+
+ /* Wait for MIPI PHY status bit to set */
+ for_each_dsi_port(port, intel_dsi->ports) {
+ if (intel_wait_for_register(dev_priv,
+ MIPI_CTRL(port), GLK_MIPIIO_PORT_POWERED,
+ GLK_MIPIIO_PORT_POWERED, 20))
+ DRM_ERROR("PHY is not ON\n");
+ }
+
+ /* Get IO out of reset */
+ tmp = I915_READ(MIPI_CTRL(PORT_A));
+ I915_WRITE(MIPI_CTRL(PORT_A), tmp | GLK_MIPIIO_RESET_RELEASED);
+
+ /* Get IO out of Low power state*/
+ for_each_dsi_port(port, intel_dsi->ports) {
+ if (!(I915_READ(MIPI_DEVICE_READY(port)) & DEVICE_READY)) {
+ val = I915_READ(MIPI_DEVICE_READY(port));
+ val &= ~ULPS_STATE_MASK;
+ val |= DEVICE_READY;
+ I915_WRITE(MIPI_DEVICE_READY(port), val);
+ usleep_range(10, 15);
+ }
+
+ /* Enter ULPS */
+ val = I915_READ(MIPI_DEVICE_READY(port));
+ val &= ~ULPS_STATE_MASK;
+ val |= (ULPS_STATE_ENTER | DEVICE_READY);
+ I915_WRITE(MIPI_DEVICE_READY(port), val);
+
+ /* Wait for ULPS Not active */
+ if (intel_wait_for_register(dev_priv,
+ MIPI_CTRL(port), GLK_ULPS_NOT_ACTIVE,
+ GLK_ULPS_NOT_ACTIVE, 20))
+
+ /* Exit ULPS */
+ val = I915_READ(MIPI_DEVICE_READY(port));
+ val &= ~ULPS_STATE_MASK;
+ val |= (ULPS_STATE_EXIT | DEVICE_READY);
+ I915_WRITE(MIPI_DEVICE_READY(port), val);
+
+ /* Enter Normal Mode */
+ val = I915_READ(MIPI_DEVICE_READY(port));
+ val &= ~ULPS_STATE_MASK;
+ val |= (ULPS_STATE_NORMAL_OPERATION | DEVICE_READY);
+ I915_WRITE(MIPI_DEVICE_READY(port), val);
+
+ tmp = I915_READ(MIPI_CTRL(port));
+ tmp &= ~GLK_LP_WAKE;
+ I915_WRITE(MIPI_CTRL(port), tmp);
+ }
+
+ /* Wait for Stop state */
+ for_each_dsi_port(port, intel_dsi->ports) {
+ if (intel_wait_for_register(dev_priv,
+ MIPI_CTRL(port), GLK_DATA_LANE_STOP_STATE,
+ GLK_DATA_LANE_STOP_STATE, 20))
+ DRM_ERROR("Date lane not in STOP state\n");
+ }
+
+ /* Wait for AFE LATCH */
+ for_each_dsi_port(port, intel_dsi->ports) {
+ if (intel_wait_for_register(dev_priv,
+ BXT_MIPI_PORT_CTRL(port), AFE_LATCHOUT,
+ AFE_LATCHOUT, 20))
+ DRM_ERROR("D-PHY not entering LP-11 state\n");
+ }
+}
+
static void bxt_dsi_device_ready(struct intel_encoder *encoder)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
@@ -559,6 +687,9 @@ static void intel_dsi_pre_enable(struct intel_encoder
*encoder,
intel_dsi_prepare(encoder, pipe_config);
+ if (IS_GEMINILAKE(dev_priv))
+ intel_dsi_enable_mipiio(encoder);
+
/* Panel Enable over CRC PMIC */
if (intel_dsi->gpio_panel)
gpiod_set_value_cansleep(intel_dsi->gpio_panel, 1);
@@ -699,6 +830,9 @@ static void intel_dsi_clear_device_ready(struct
intel_encoder *encoder)
usleep_range(2000, 2500);
}
+ if (IS_GEMINILAKE(dev_priv))
+ intel_dsi_disable_mipiio(encoder);
+
intel_disable_dsi_pll(encoder);
}
--
1.9.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
