Christopher, Did you enabled CONFIG_SND_DEBUG and CONFIG_SND_DEBUG_VERBOSE in kconfig? I've been looking for the error messages related to zeroed ELD but never managed to find any in your dmesg.
Some analyzes of your dmesg: - all drm_edid_to_eld() invocations reads valid EDID data: [ 2.560001] [drm:drm_edid_to_eld], ELD monitor TX-SR607 [ 2.560005] [drm:drm_edid_to_eld], ELD size 13, SAD count 8 [ 4.636651] [drm:drm_edid_to_eld], ELD monitor TX-SR607 [ 4.636654] [drm:drm_edid_to_eld], ELD size 13, SAD count 8 [ 10.486889] [drm:drm_edid_to_eld], ELD monitor TX-SR607 [ 10.486893] [drm:drm_edid_to_eld], ELD size 13, SAD count 8 [ 10.976211] [drm:drm_edid_to_eld], ELD monitor TX-SR607 [ 10.976215] [drm:drm_edid_to_eld], ELD size 13, SAD count 8 [ 12.034833] [drm:drm_edid_to_eld], ELD monitor TX-SR607 [ 12.034836] [drm:drm_edid_to_eld], ELD size 13, SAD count 8 [ 12.524615] [drm:drm_edid_to_eld], ELD monitor TX-SR607 [ 12.524618] [drm:drm_edid_to_eld], ELD size 13, SAD count 8 [ 13.015331] [drm:drm_edid_to_eld], ELD monitor TX-SR607 [ 13.015334] [drm:drm_edid_to_eld], ELD size 13, SAD count 8 [ 14.374778] [drm:drm_edid_to_eld], ELD monitor TX-SR607 [ 14.374781] [drm:drm_edid_to_eld], ELD size 13, SAD count 8 [ 16.373820] [drm:drm_edid_to_eld], ELD monitor TX-SR607 [ 16.373824] [drm:drm_edid_to_eld], ELD size 13, SAD count 8 [ 19.912594] [drm:drm_edid_to_eld], ELD monitor TX-SR607 [ 19.912597] [drm:drm_edid_to_eld], ELD size 13, SAD count 8 - all *_write_eld() invocations are writing non-empty ELD to the same pipe A [ 2.674229] [drm:intel_hdmi_mode_set], Enabling HDMI audio on pipe A [ 2.674231] [drm:intel_write_eld], ELD on [CONNECTOR:14:HDMI-A-2], [ENCODER:13:TMDS-13] [ 2.674232] [drm:ironlake_write_eld], ELD on pipe A [ 2.674234] [drm:ironlake_write_eld], Audio directed to unknown port [ 2.674237] [drm:ironlake_write_eld], ELD size 13 [ 13.651210] [drm:intel_hdmi_mode_set], Enabling HDMI audio on pipe A [ 13.651214] [drm:intel_write_eld], ELD on [CONNECTOR:14:HDMI-A-2], [ENCODER:13:TMDS-13] [ 13.651218] [drm:ironlake_write_eld], ELD on pipe A [ 13.651221] [drm:ironlake_write_eld], Audio directed to unknown port [ 13.651227] [drm:ironlake_write_eld], ELD size 13 - audio driver first got the good ELD: [ 10.268696] HDMI status: Pin=7 Presence_Detect=1 ELD_Valid=1 [ 10.272189] HDMI: detected monitor TX-SR607 at connection type HDMI [ 10.272190] HDMI: available speakers: FL/FR LFE FC RL/RR RLC/RRC [ 10.272193] HDMI: supports coding type LPCM: channels = 2, rates = 44100 48000 88200 176400 192000 384000, bits = 16 20 24 [ 10.272196] HDMI: supports coding type LPCM: channels = 8, rates = 44100 48000 88200 176400 192000 384000, bits = 16 20 24 [ 10.272198] HDMI: supports coding type AC-3: channels = 8, rates = 44100 48000 88200, max bitrate = 640000 [ 10.272199] HDMI: supports coding type DTS: channels = 8, rates = 48000 88200, max bitrate = 1536000 [ 10.272201] HDMI: supports coding type DSD (One Bit Audio): channels = 6, rates = 48000 [ 10.272202] HDMI: supports coding type E-AC-3/DD+ (Dolby Digital Plus): channels = 8, rates = 48000 88200 [ 10.272204] HDMI: supports coding type DTS-HD: channels = 8, rates = 48000 88200 176400 192000 384000 [ 10.272206] HDMI: supports coding type MLP (Dolby TrueHD): channels = 8, rates = 88200 192000 [ 10.274995] HDMI hot plug event: Pin=7 Presence_Detect=1 ELD_Valid=1 [ 10.275049] HDMI status: Pin=7 Presence_Detect=1 ELD_Valid=1 [ 10.278541] HDMI: detected monitor TX-SR607 at connection type HDMI [ 10.278543] HDMI: available speakers: FL/FR LFE FC RL/RR RLC/RRC [ 10.278545] HDMI: supports coding type LPCM: channels = 2, rates = 44100 48000 88200 176400 192000 384000, bits = 16 20 24 [ 10.278548] HDMI: supports coding type LPCM: channels = 8, rates = 44100 48000 88200 176400 192000 384000, bits = 16 20 24 [ 10.278550] HDMI: supports coding type AC-3: channels = 8, rates = 44100 48000 88200, max bitrate = 640000 [ 10.278551] HDMI: supports coding type DTS: channels = 8, rates = 48000 88200, max bitrate = 1536000 [ 10.278553] HDMI: supports coding type DSD (One Bit Audio): channels = 6, rates = 48000 [ 10.278554] HDMI: supports coding type E-AC-3/DD+ (Dolby Digital Plus): channels = 8, rates = 48000 88200 [ 10.278556] HDMI: supports coding type DTS-HD: channels = 8, rates = 48000 88200 176400 192000 384000 [ 10.278558] HDMI: supports coding type MLP (Dolby TrueHD): channels = 8, rates = 88200 192000 [ 10.278612] HDMI hot plug event: Pin=7 Presence_Detect=1 ELD_Valid=1 [ 10.278644] HDMI status: Pin=7 Presence_Detect=1 ELD_Valid=1 [ 10.282143] HDMI: detected monitor TX-SR607 at connection type HDMI [ 10.282145] HDMI: available speakers: FL/FR LFE FC RL/RR RLC/RRC [ 10.282147] HDMI: supports coding type LPCM: channels = 2, rates = 44100 48000 88200 176400 192000 384000, bits = 16 20 24 [ 10.282149] HDMI: supports coding type LPCM: channels = 8, rates = 44100 48000 88200 176400 192000 384000, bits = 16 20 24 [ 10.282151] HDMI: supports coding type AC-3: channels = 8, rates = 44100 48000 88200, max bitrate = 640000 [ 10.282152] HDMI: supports coding type DTS: channels = 8, rates = 48000 88200, max bitrate = 1536000 [ 10.282154] HDMI: supports coding type DSD (One Bit Audio): channels = 6, rates = 48000 [ 10.282155] HDMI: supports coding type E-AC-3/DD+ (Dolby Digital Plus): channels = 8, rates = 48000 88200 [ 10.282157] HDMI: supports coding type DTS-HD: channels = 8, rates = 48000 88200 176400 192000 384000 [ 10.282159] HDMI: supports coding type MLP (Dolby TrueHD): channels = 8, rates = 88200 192000 - audio driver then read 0 ELD, here we should see some error messages if you enabled CONFIG_SND_DEBUG. [ 13.651210] [drm:intel_hdmi_mode_set], Enabling HDMI audio on pipe A [ 13.651214] [drm:intel_write_eld], ELD on [CONNECTOR:14:HDMI-A-2], [ENCODER:13:TMDS-13] [ 13.651218] [drm:ironlake_write_eld], ELD on pipe A [ 13.651221] [drm:ironlake_write_eld], Audio directed to unknown port [ 13.651227] [drm:ironlake_write_eld], ELD size 13 [ 13.651306] HDMI hot plug event: Pin=7 Presence_Detect=1 ELD_Valid=0 [ 13.651342] HDMI status: Pin=7 Presence_Detect=1 ELD_Valid=1 [ 13.654884] HDMI hot plug event: Pin=7 Presence_Detect=1 ELD_Valid=1 [ 13.654926] HDMI status: Pin=7 Presence_Detect=1 ELD_Valid=1 Thanks, Fengguang _______________________________________________ Intel-gfx mailing list Intel-gfx@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/intel-gfx
