Are you a bit impatient? 2 days ago I told you, that THIS (WW) mouse: cannot pop module 'usbms' off mouse device: Invalid argument
appears to be the reason. It has nothing to do with xorg.conf being present, or not. %mab On Mon, Mar 29, 2010 at 3:35 PM, philo <[email protected]> wrote: > hello, > I'll like configured my X server, I hope to have gnome on my Blade 1500, > XVR-100 graphics card. > i cannot générate xorg.conf. > > attached file /var/log... > after > > Xorg -verbose -logverbose > > > > > > Best regards > philo > > (EE) Cannot create /var/dt/sdtlogin directory for display manager pipe: No > such file or directory > > X.Org X Server 1.7.4 > Release Date: 2010-01-08 > X Protocol Version 11, Revision 0 > Build Operating System: SunOS 5.11 sun4u > Current Operating System: SunOS usrv-starbuck 5.11 snv_134 sun4u > Build Date: 16 February 2010 01:06:28AM > Solaris ABI: 64-bit > Current version of pixman: 0.16.4 > Before reporting problems, check http://sunsolve.sun.com/ > to make sure that you have the latest version. > Markers: (--) probed, (**) from config file, (==) default setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > (==) Log file: "/var/log/Xorg.0.log", Time: Sun Mar 28 18:12:46 2010 > (II) Loader magic: 1002d8658 > (II) Module ABI versions: > X.Org ANSI C Emulation: 0.4 > X.Org Video Driver: 6.0 > X.Org XInput driver : 7.0 > X.Org Server Extension : 2.0 > (--) using VT number 2 > > (--) console driver: SUNWefb > Primary device is not PCI > (==) Using default built-in configuration (30 lines) > (==) --- Start of built-in configuration --- > Section "Device" > Identifier "Builtin Default SUNW Device 0" > Driver "SUNW" > EndSection > Section "Screen" > Identifier "Builtin Default SUNW Screen 0" > Device "Builtin Default SUNW Device 0" > EndSection > Section "Device" > Identifier "Builtin Default efb Device 0" > Driver "efb" > EndSection > Section "Screen" > Identifier "Builtin Default efb Screen 0" > Device "Builtin Default efb Device 0" > EndSection > Section "Device" > Identifier "Builtin Default wsfb Device 0" > Driver "wsfb" > EndSection > Section "Screen" > Identifier "Builtin Default wsfb Screen 0" > Device "Builtin Default wsfb Device 0" > EndSection > Section "ServerLayout" > Identifier "Builtin Default Layout" > Screen "Builtin Default SUNW Screen 0" > Screen "Builtin Default efb Screen 0" > Screen "Builtin Default wsfb Screen 0" > EndSection > (==) --- End of built-in configuration --- > (==) ServerLayout "Builtin Default Layout" > (**) |-->Screen "Builtin Default SUNW Screen 0" (0) > (**) | |-->Monitor "<default monitor>" > (**) | |-->Device "Builtin Default SUNW Device 0" > (==) No monitor specified for screen "Builtin Default SUNW Screen 0". > Using a default monitor configuration. > (**) |-->Screen "Builtin Default efb Screen 0" (1) > (**) | |-->Monitor "<default monitor>" > (**) | |-->Device "Builtin Default efb Device 0" > (==) No monitor specified for screen "Builtin Default efb Screen 0". > Using a default monitor configuration. > (**) |-->Screen "Builtin Default wsfb Screen 0" (2) > (**) | |-->Monitor "<default monitor>" > (**) | |-->Device "Builtin Default wsfb Device 0" > (==) No monitor specified for screen "Builtin Default wsfb Screen 0". > Using a default monitor configuration. > (==) Disabling SIGIO handlers for input devices > (==) Automatically adding devices > (==) Automatically enabling devices > (==) FontPath set to: > catalogue:/etc/X11/fontpath.d > (==) ModulePath set to "/usr/lib/xorg/modules,/usr/X11/lib/modules/" > (II) Cannot locate a core pointer device. > (II) Cannot locate a core keyboard device. > (II) The server relies on HAL to provide the list of input devices. > If no devices become available, reconfigure HAL or disable > AutoAddDevices. > (II) LoadModule: "extmod" > (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so > (II) Module extmod: vendor="X.Org Foundation" > compiled for 1.7.4, module version = 1.0.0 > Module class: X.Org Server Extension > ABI class: X.Org Server Extension, version 2.0 > (II) Loading extension MIT-SCREEN-SAVER > (II) Loading extension XFree86-VidModeExtension > (II) Loading extension XFree86-DGA > (II) Loading extension DPMS > (II) Loading extension XVideo > (II) Loading extension XVideo-MotionCompensation > (II) Loading extension X-Resource > (II) LoadModule: "dbe" > (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so > (II) Module dbe: vendor="X.Org Foundation" > compiled for 1.7.4, module version = 1.0.0 > Module class: X.Org Server Extension > ABI class: X.Org Server Extension, version 2.0 > (II) Loading extension DOUBLE-BUFFER > (II) LoadModule: "glx" > (II) Loading /usr/lib/xorg/modules/extensions/libglx.so > (II) Module glx: vendor="X.Org Foundation" > compiled for 1.7.4, module version = 1.0.0 > ABI class: X.Org Server Extension, version 2.0 > (==) AIGLX enabled > (II) Loading extension GLX > (II) LoadModule: "dri" > (II) Loading /usr/lib/xorg/modules/extensions/libdri.so > (II) Module dri: vendor="X.Org Foundation" > compiled for 1.7.4, module version = 1.0.0 > ABI class: X.Org Server Extension, version 2.0 > (II) Loading extension XFree86-DRI > (II) LoadModule: "dri2" > (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so > (II) Module dri2: vendor="X.Org Foundation" > compiled for 1.7.4, module version = 1.1.0 > ABI class: X.Org Server Extension, version 2.0 > (II) Loading extension DRI2 > (II) LoadModule: "ia" > (II) Loading /usr/lib/xorg/modules/extensions/libia.so > (II) Module IANAME: vendor="X.Org Foundation" > compiled for 1.7.4, module version = 1.0.0 > ABI class: X.Org Server Extension, version 2.0 > (II) Loading extension SolarisIA > (II) LoadModule: "xtsol" > (WW) Warning, couldn't open module xtsol > (II) UnloadModule: "xtsol" > (EE) Failed to load module "xtsol" (module does not exist, 0) > (II) LoadModule: "sunw" > (WW) Warning, couldn't open module sunw > (II) UnloadModule: "sunw" > (EE) Failed to load module "sunw" (module does not exist, 0) > (II) LoadModule: "efb" > (II) Loading /usr/lib/xorg/modules/drivers/efb_drv.so > (II) Module efb: vendor="X.Org Foundation" > compiled for 1.7.3, module version = 4.3.0 > Module class: X.Org Video Driver > ABI class: X.Org Video Driver, version 6.0 > (II) LoadModule: "wsfb" > (WW) Warning, couldn't open module wsfb > (II) UnloadModule: "wsfb" > (EE) Failed to load module "wsfb" (module does not exist, 0) > (II) efb: Driver for ATI Radeon chipsets: > ATI Radeon Mobility X600 (M24) 3150 (PCIE), > ATI Radeon Mobility X300 (M24) 3152 (PCIE), > ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE), > ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136, > ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP), > ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP), > ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP), > ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP), > ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP), > ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP), > ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650, > ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237, > ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP), > ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337, > ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI), > ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP), > ATI Radeon X800PRO (R420) JI (AGP), > ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP), > ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP), > ATI Radeon Mobility 9800 (M18) JN (AGP), > ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP), > ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP), > ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP), > ATI Radeon Mobility M7 LW (AGP), > ATI Mobility FireGL 7800 M7 LX (AGP), > ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP), > ATI FireGL Mobility 9000 (M9) Ld (AGP), > ATI Radeon Mobility 9000 (M9) Lf (AGP), > ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP), > ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP), > ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP), > ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP), > ATI Radeon 9800XT NJ (AGP), > ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP), > ATI Radeon Mobility 9600 (M10) NQ (AGP), > ATI Radeon Mobility 9600 (M11) NR (AGP), > ATI Radeon Mobility 9600 (M10) NS (AGP), > ATI FireGL Mobility T2 (M10) NT (AGP), > ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP), > ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP), > ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP), > ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI), > ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI), > ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI), > ATI Radeon Mobility X300 (M22) 5460 (PCIE), > ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE), > ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE), > ATI Radeon X800PRO (R423) UI (PCIE), > ATI Radeon X800LE (R423) UJ (PCIE), > ATI Radeon X800SE (R423) UK (PCIE), > ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE), > ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE), > ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE), > ATI FireGL unknown (R423) UR (PCIE), > ATI FireGL unknown (R423) UT (PCIE), > ATI Mobility FireGL V5000 (M26) (PCIE), > ATI Mobility FireGL V5000 (M26) (PCIE), > ATI Mobility Radeon X700 XL (M26) (PCIE), > ATI Mobility Radeon X700 (M26) (PCIE), > ATI Mobility Radeon X700 (M26) (PCIE), ATI Radeon 9100 IGP (A5) 5834, > ATI Radeon Mobility 9100 IGP (U3) 5835, > ATI Radeon XPRESS 200 5954 (PCIE), > ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP), > ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP), > ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI), > ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE), > ATI Radeon XPRESS 200M 5975 (PCIE), > ATI Radeon XPRESS 200 5A41 (PCIE), > ATI Radeon XPRESS 200M 5A42 (PCIE), > ATI Radeon XPRESS 200 5A61 (PCIE), > ATI Radeon XPRESS 200M 5A62 (PCIE), > ATI Radeon X300 (RV370) 5B60 (PCIE), > ATI Radeon X600 (RV370) 5B62 (PCIE), > ATI Radeon X550 (RV370) 5B63 (PCIE), > ATI Radeon X550XTX (RV370) 5657 (PCIE), > ATI FireGL V3100 (RV370) 5B64 (PCIE), > ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE), > ATI Radeon Mobility 9200 (M9+) 5C61 (AGP), > ATI Radeon Mobility 9200 (M9+) 5C63 (AGP), > ATI Mobility Radeon X800 XT (M28) (PCIE), > ATI Mobility FireGL V5100 (M28) (PCIE), > ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE), > ATI Radeon X850 XT PE (R480) (PCIE), > ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE), > ATI unknown Radeon / FireGL (R480) 5D50 (PCIE), > ATI Radeon X850 XT (R480) (PCIE), > ATI Radeon X800XT (R423) 5D57 (PCIE), > ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE), > ATI Radeon X700 PRO (RV410) (PCIE), > ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE), > ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800, > ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800, > ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300, > ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800, > ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800, > ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505, > ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL, > ATI Mobility Radeon X1400, ATI Radeon X1300/X1550, > ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300, > ATI Mobility Radeon X1300, ATI Mobility Radeon X1300, > ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300, > ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350, > ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550, > ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450, > ATI Radeon X1300/X1550, ATI Mobility Radeon X2300, > ATI Mobility Radeon X2300, ATI Mobility Radeon X1350, > ATI Mobility Radeon X1350, ATI Mobility Radeon X1450, > ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350, > ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600, > ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600, > ATI Mobility FireGL V5200, ATI Mobility Radeon X1600, > ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600, > ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400, > ATI Mobility FireGL V5250, ATI Mobility Radeon X1700, > ATI Mobility Radeon X1700 XT, ATI FireGL V5200, > ATI Mobility Radeon X1700, ATI Radeon X2300HD, > ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300, > ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950, > ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900, > ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900, > ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900, > ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950, > ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560, > ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI ATI FireGL V7400, > ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560, > ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835, > ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740, > ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT, > ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT, > ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600, ATI RV610, > ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro, > ATI ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI RV610, > ATI ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT, > ATI Mobility Radeon HD 2400, ATI ATI RADEON E2400, ATI RV610, > ATI RV670, ATI Radeon HD3870, ATI Radeon HD3850, ATI RV670, > ATI Radeon HD3870 X2, ATI FireGL V7700, ATI RV630, > ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT, > ATI ATI Radeon HD 2600 XT AGP, ATI ATI Radeon HD 2600 Pro AGP, > ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630, > ATI Gemini ATI Mobility Radeon HD 2600 XT, ATI FireGL V5600, > ATI FireGL V3600, ATI ATI Radeon HD 2600 LE > (WW) Falling back to old probe method for efb > (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support > (II) Running in FRAMEBUFFER Mode > (II) efb(0): RADEONPreInit > (II) efb(0): MMIO registers at 0x0000000000100000: size 256KB > (II) efb(0): PCI bus 0 card 0 func 0 > (II) efb(0): Creating default Display subsection in Screen section > "Builtin Default efb Screen 0" for depth/fbbpp 24/32 > (==) efb(0): Depth 24, (--) framebuffer bpp 32 > (II) efb(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) > (==) efb(0): Default visual is TrueColor > (II) efb(0): VGAAccess option set to FALSE, VGA module load skipped > (==) efb(0): RGB weight 888 > (II) efb(0): Using 8 bits per RGB (8 bit DAC) > (WW) efb(0): Restoring MEM_CNTL (00000000), setting to 00002e00 > (WW) efb(0): Restoring MPP_TB_CONFIG<31:24> (04), setting to 01 > (--) efb(0): Chipset: "ATI Radeon VE/7000 QY (AGP/PCI)" (ChipID = 0x5159) > (--) efb(0): Linear framebuffer at 0x0000000008000000 > (II) efb(0): Detected total video RAM=65536K, accessible=65536K (PCI > BAR=256K) > (--) efb(0): Mapped VideoRAM: 65536 kByte (64 bit DDR SDRAM) > (II) Loading sub module "ddc" > (II) LoadModule: "ddc" > (II) Module "ddc" already built-in > (II) Loading sub module "i2c" > (II) LoadModule: "i2c" > (II) Module "i2c" already built-in > (WW) efb(0): Video BIOS not detected, using default clock settings! > (II) efb(0): Probed PLL values: xtal: 27.000000 Mhz, sclk: 299.076935 Mhz, > mclk: 149.538467 Mhz > (II) efb(0): PLL parameters: rf=2700 rd=12 min=12500 max=35000; xclk=29908 > (II) efb(0): Output DVI-0 has no monitor section > (II) efb(0): I2C bus "DVI-0" initialized. > (II) efb(0): Output VGA-0 has no monitor section > (II) efb(0): Output VGA-0 has no monitor section > (II) efb(0): I2C bus "VGA-0" initialized. > (II) efb(0): Output S-video has no monitor section > (II) efb(0): Output S-video has no monitor section > (II) efb(0): Port0: > Monitor -- AUTO > Connector -- DVI-I > DAC Type -- TVDAC/ExtDAC > TMDS Type -- Internal > DDC Type -- 0x64 > (II) efb(0): Port1: > Monitor -- AUTO > Connector -- VGA > DAC Type -- Primary > TMDS Type -- None > DDC Type -- 0x60 > (II) efb(0): Port2: > Monitor -- AUTO > Connector -- STV > DAC Type -- TVDAC/ExtDAC > TMDS Type -- None > DDC Type -- 0x0 > (II) efb(0): I2C device "DVI-0:ddc2" registered at address 0xA0. > (II) efb(0): Output: DVI-0, Detected Monitor Type: 0 > (II) efb(0): Detected non-DDC Monitor Type: 0 > finished output detect: 0 > (II) efb(0): I2C device "VGA-0:ddc2" registered at address 0xA0. > (II) efb(0): I2C device "VGA-0:E-EDID segment register" registered at > address 0x60. > (II) efb(0): I2C device "VGA-0:EDID EEPROM interface" registered at address > 0x62. > (II) efb(0): I2C device "VGA-0:DDC control interface" registered at address > 0x6E. > (II) efb(0): Output: VGA-0, Detected Monitor Type: 1 > (II) efb(0): EDID data from the display on output: VGA-0 > ---------------------- > (II) efb(0): Manufacturer: DEL Model: 7005 Serial#: 1127241554 > (II) efb(0): Year: 2002 Week: 30 > (II) efb(0): EDID Version: 1.3 > (II) efb(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V > (II) efb(0): Sync: Separate > (II) efb(0): Max Image Size [cm]: horiz.: 30 vert.: 23 > (II) efb(0): Gamma: 2.77 > (II) efb(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display > (II) efb(0): Default color space is primary color space > (II) efb(0): First detailed timing is preferred mode > (II) efb(0): redX: 0.631 redY: 0.329 greenX: 0.276 greenY: 0.600 > (II) efb(0): blueX: 0.143 blueY: 0.057 whiteX: 0.283 whiteY: 0.297 > (II) efb(0): Supported established timings: > (II) efb(0): 720x...@70hz > (II) efb(0): 640x...@60hz > (II) efb(0): 800x...@75hz > (II) efb(0): 1024x...@75hz > (II) efb(0): Manufacturer's mask: 0 > (II) efb(0): Supported standard timings: > (II) efb(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833 > (II) efb(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853 > (II) efb(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881 > (II) efb(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337 > (II) efb(0): Supported detailed timing: > (II) efb(0): clock: 78.8 MHz Image Size: 300 x 225 mm > (II) efb(0): h_active: 1024 h_sync: 1040 h_sync_end 1136 h_blank_end 1312 > h_border: 0 > (II) efb(0): v_active: 768 v_sync: 769 v_sync_end 772 v_blanking: 800 > v_border: 0 > (II) efb(0): Serial No: 5P09927NC0WR > (II) efb(0): Monitor name: DELL E772p > (II) efb(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 70 kHz, > PixClock max 110 MHz > (II) efb(0): EDID (in hex): > (II) efb(0): 00ffffffffffff0010ac057052573043 > (II) efb(0): 1e0c0103681e17b1ee9ea8a154469924 > (II) efb(0): 0e484ca04200315945596159714f0101 > (II) efb(0): 010101010101c31e0020410020301060 > (II) efb(0): 13002ce11000001e000000ff00355030 > (II) efb(0): 393932374e433057520a000000fc0044 > (II) efb(0): 454c4c202045373732700a20000000fd > (II) efb(0): 0032a01e460b000a20202020202000ac > finished output detect: 1 > finished output detect: 2 > finished all detect > (II) efb(0): Max desktop size set to 2048x1200 > (II) efb(0): For a larger or smaller max desktop size, add a Virtual line to > your xorg.conf > (II) efb(0): If you are having trouble with 3D, reduce the desktop size by > adjusting the Virtual line to your xorg.conf > before xf86InitialConfiguration > (II) efb(0): Output: DVI-0, Detected Monitor Type: 0 > (II) efb(0): Detected non-DDC Monitor Type: 0 > (II) efb(0): Output: VGA-0, Detected Monitor Type: 1 > (II) efb(0): EDID data from the display on output: VGA-0 > ---------------------- > (II) efb(0): Manufacturer: DEL Model: 7005 Serial#: 1127241554 > (II) efb(0): Year: 2002 Week: 30 > (II) efb(0): EDID Version: 1.3 > (II) efb(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V > (II) efb(0): Sync: Separate > (II) efb(0): Max Image Size [cm]: horiz.: 30 vert.: 23 > (II) efb(0): Gamma: 2.77 > (II) efb(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display > (II) efb(0): Default color space is primary color space > (II) efb(0): First detailed timing is preferred mode > (II) efb(0): redX: 0.631 redY: 0.329 greenX: 0.276 greenY: 0.600 > (II) efb(0): blueX: 0.143 blueY: 0.057 whiteX: 0.283 whiteY: 0.297 > (II) efb(0): Supported established timings: > (II) efb(0): 720x...@70hz > (II) efb(0): 640x...@60hz > (II) efb(0): 800x...@75hz > (II) efb(0): 1024x...@75hz > (II) efb(0): Manufacturer's mask: 0 > (II) efb(0): Supported standard timings: > (II) efb(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833 > (II) efb(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853 > (II) efb(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881 > (II) efb(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337 > (II) efb(0): Supported detailed timing: > (II) efb(0): clock: 78.8 MHz Image Size: 300 x 225 mm > (II) efb(0): h_active: 1024 h_sync: 1040 h_sync_end 1136 h_blank_end 1312 > h_border: 0 > (II) efb(0): v_active: 768 v_sync: 769 v_sync_end 772 v_blanking: 800 > v_border: 0 > (II) efb(0): Serial No: 5P09927NC0WR > (II) efb(0): Monitor name: DELL E772p > (II) efb(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 70 kHz, > PixClock max 110 MHz > (II) efb(0): EDID (in hex): > (II) efb(0): 00ffffffffffff0010ac057052573043 > (II) efb(0): 1e0c0103681e17b1ee9ea8a154469924 > (II) efb(0): 0e484ca04200315945596159714f0101 > (II) efb(0): 010101010101c31e0020410020301060 > (II) efb(0): 13002ce11000001e000000ff00355030 > (II) efb(0): 393932374e433057520a000000fc0044 > (II) efb(0): 454c4c202045373732700a20000000fd > (II) efb(0): 0032a01e460b000a20202020202000ac > in RADEONProbeOutputModes > (II) efb(0): EDID vendor "DEL", prod id 28677 > (II) efb(0): Output DVI-0 disconnected > (II) efb(0): Output VGA-0 connected > (II) efb(0): Output S-video disconnected > (II) efb(0): Using exact sizes for initial modes > (II) efb(0): Output VGA-0 using initial mode 1024x768 > (II) efb(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. > after xf86InitialConfiguration > (==) efb(0): DPI set to (96, 96) > (II) Loading sub module "fb" > (II) LoadModule: "fb" > (II) Loading /usr/lib/xorg/modules/libfb.so > (II) Module fb: vendor="X.Org Foundation" > compiled for 1.7.4, module version = 1.0.0 > ABI class: X.Org ANSI C Emulation, version 0.4 > (II) Loading sub module "ramdac" > (II) LoadModule: "ramdac" > (II) Module "ramdac" already built-in > (==) efb(0): Using XAA acceleration architecture > (II) Loading sub module "xaa" > (II) LoadModule: "xaa" > (II) Loading /usr/lib/xorg/modules/libxaa.so > (II) Module xaa: vendor="X.Org Foundation" > compiled for 1.7.4, module version = 1.2.1 > ABI class: X.Org Video Driver, version 6.0 > (==) efb(0): Assuming overlay scaler buffer width is 1536 > (II) efb(0): Cannot access BIOS or it is not valid. > If your card is TV-in capable you will need to specify > options RageTheatreCrystal, RageTheatreTunerPort, > RageTheatreSVideoPort and TunerType in /etc/X11/xorg.conf. > (!!) efb(0): For information on using the multimedia capabilities > of this adapter, please see http://gatos.sf.net. > (!!) efb(0): MergedFB support has been removed and replaced with xrandr 1.2 > support > (--) Depth 24 pixmap format is 32 bpp > (II) efb(0): RADEONScreenInit 8000000 0 > (II) efb(0): Map: 0x08000000, 0x04000000 > (II) efb(0): RADEONSave > (II) efb(0): Read: 0x0000000c 0x00010046 0x00000000 > (II) efb(0): Read: rd=12, fd=70, pd=1 > (II) efb(0): Read: 0x00000000 0x00000000 0x00000000 > (II) efb(0): Read: rd=0, fd=0, pd=0 > Entering TV Save > Save TV timing tables > saveTimingTables: reading timing tables > TV Save done > disable montype: 1 > (II) efb(0): RADEONInitMemoryMap() : > (II) efb(0): mem_size : 0x04000000 > (II) efb(0): MC_FB_LOCATION : 0x03ff0000 > (II) efb(0): MC_AGP_LOCATION : 0xffffffc0 > (II) efb(0): Setting up initial surfaces > (II) efb(0): Setting up accel memmap > (II) efb(0): Memory manager initialized to (0,0) (1152,8191) > (II) efb(0): Reserved area from (0,1152) to (1152,1154) > (II) efb(0): Largest offscreen area available: 1152 x 7037 > (II) efb(0): Initializing fb layer > disable montype: 1 > init memmap > init common > init crtc1 > init pll1 > freq: 78750000 > best_freq: 78750000 > best_feedback_div: 70 > best_ref_div: 12 > best_post_div: 2 > (II) efb(0): dc=7875, of=0, fd=70, rd=12, pd=2 > restore memmap > (II) efb(0): RADEONRestoreMemMapRegisters() : > (II) efb(0): MC_FB_LOCATION : 0x03ff0000 0x03ff0000 > (II) efb(0): MC_AGP_LOCATION : 0xffffffc0 > (II) efb(0): Updating display base addresses... > (II) efb(0): Memory map updated. > restore common > restore crtc1 > (II) efb(0): Programming CRTC1, offset: 0x00000000 > restore pll1 > (II) efb(0): Wrote: 0x0000000c 0x00010046 0x00000000 (0x00008f30) > (II) efb(0): Wrote: rd=12, fd=70, pd=1 > finished PLL1 > (II) efb(0): GRPH_BUFFER_CNTL from 20005c5c to 20005c5c > restore dac > enable montype: 1 > (WW) efb(0): No crtc mode list for crtc 1,continuing with desired mode > disable montype: 0 > disable montype: 5 > (II) efb(0): RADEONSaveScreen(0) > disable montype: 1 > (II) efb(0): Initializing backing store > (==) efb(0): Backing store disabled > (II) efb(0): Setting up final surfaces > (II) efb(0): Initializing Acceleration > (II) efb(0): Render acceleration enabled > (II) efb(0): EngineInit (32/32) > (II) efb(0): Pitch for acceleration = 144 > (II) efb(0): EngineRestore (32/32) > (II) efb(0): Using XFree86 Acceleration Architecture (XAA) > Screen to screen bit blits > Solid filled rectangles > 8x8 mono pattern filled rectangles > Indirect CPU to Screen color expansion > Solid Lines > Dashed Lines > Scanline Image Writes > Setting up tile and stipple cache: > 32 128x128 slots > 32 256x256 slots > 16 512x512 slots > (II) efb(0): Acceleration enabled > (II) efb(0): Initializing DPMS > (==) efb(0): DPMS enabled > (II) efb(0): Initializing Cursor > (==) efb(0): Silken mouse disabled > (II) efb(0): Using hardware cursor 0 (scanline 1154) > (II) efb(0): Using hardware cursor 1 (scanline 1157) > (II) efb(0): Largest offscreen area available: 1152 x 7029 > (II) efb(0): Initializing DGA > (II) efb(0): Initializing Xv > (II) efb(0): No video input capabilities detected and no information is > provided - disabling multimedia i2c > (II) Loading sub module "theatre_detect" > (II) LoadModule: "theatre_detect" > (WW) Warning, couldn't open module theatre_detect > (II) UnloadModule: "theatre_detect" > (EE) efb: Failed to load module "theatre_detect" (module does not exist, 0) > (EE) efb(0): Unable to load Rage Theatre detect module > (II) efb(0): RandR 1.2 enabled, ignore the following RandR disabled message. > (II) efb(0): Initializing color map > (II) efb(0): RADEONScreenInit finished > (--) RandR disabled > (II) Initializing built-in extension Generic Event Extension > (II) Initializing built-in extension SHAPE > (II) Initializing built-in extension MIT-SHM > (II) Initializing built-in extension XInputExtension > (II) Initializing built-in extension XTEST > (II) Initializing built-in extension BIG-REQUESTS > (II) Initializing built-in extension SYNC > (II) Initializing built-in extension XKEYBOARD > (II) Initializing built-in extension XC-MISC > (II) Initializing built-in extension SECURITY > (II) Initializing built-in extension XINERAMA > (II) Initializing built-in extension XFIXES > (II) Initializing built-in extension RENDER > (II) Initializing built-in extension RANDR > (II) Initializing built-in extension COMPOSITE > (II) Initializing built-in extension DAMAGE > (II) AIGLX: Screen 0 is not DRI2 capable > (II) AIGLX: Screen 0 is not DRI capable > (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so > (II) GLX: Initialized DRISWRAST GL provider for screen 0 > (II) efb(0): Setting screen physical size to 270 x 203 > (II) XKB: Reusing cached keymap > (II) efb(0): RADEONSaveScreen(2) > enable montype: 1 > (II) config/hal: Adding input device mouse > (II) LoadModule: "mouse" > (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so > (II) Module mouse: vendor="X.Org Foundation" > compiled for 1.7.4, module version = 1.5.0 > Module class: X.Org XInput Driver > ABI class: X.Org XInput driver, version 7.0 > (**) Option "Protocol" "VUID" > (**) mouse: Protocol: VUID > (**) mouse: always reports core events > (**) Option "StreamsModule" "usbms" > (**) Option "Device" "/dev/usb/hid1" > (II) mouse: Setting Buttons option to "3" > (==) mouse: Emulate3Buttons, Emulate3Timeout: 50 > (**) mouse: ZAxisMapping: buttons 4 and 5 > (**) mouse: Buttons: 9 > (II) XINPUT: Adding extended input device "mouse" (type: MOUSE) > (**) mouse: (accel) keeping acceleration scheme 1 > (**) mouse: (accel) acceleration profile 0 > (**) Option "Device" "/dev/usb/hid1" > (WW) mouse: couldn't get wheel state > (II) config/hal: Adding input device keyboard > (II) LoadModule: "kbd" > (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so > (II) Module kbd: vendor="X.Org Foundation" > compiled for 1.7.4, module version = 1.4.0 > Module class: X.Org XInput Driver > ABI class: X.Org XInput driver, version 7.0 > (**) keyboard: always reports core events > (**) Option "Device" "/dev/usb/hid0" > (II) keyboard: Opened device "/dev/usb/hid0" > (**) Option "XkbRules" "base" > (**) keyboard: XkbRules: "base" > (**) Option "XkbModel" "sun_type6_usb" > (**) keyboard: XkbModel: "sun_type6_usb" > (**) Option "XkbLayout" "us" > (**) keyboard: XkbLayout: "us" > (**) Option "CustomKeycodes" "off" > (**) keyboard: CustomKeycodes disabled > (II) XINPUT: Adding extended input device "keyboard" (type: KEYBOARD) > (**) Option "StreamsModule" "usbkbm" > (--) keyboard: Keyboard type: USB (6) > (--) keyboard: Keyboard layout: 33 > (WW) mouse: cannot pop module 'usbms' off mouse device: Invalid argument > (II) UnloadModule: "mouse" > (II) UnloadModule: "kbd" > (II) efb(0): RADEONCloseScreen > (II) efb(0): Disposing accel... > (II) efb(0): Disposing cursor info > (II) efb(0): Disposing DGA > (II) efb(0): Unmapping memory > (WW) xf86CloseConsole(): unable to mmap framebuffer (Invalid argument) > > _______________________________________________ > indiana-discuss mailing list > [email protected] > http://mail.opensolaris.org/mailman/listinfo/indiana-discuss > > _______________________________________________ indiana-discuss mailing list [email protected] http://mail.opensolaris.org/mailman/listinfo/indiana-discuss
