Steve,
I replied earlier to one of your other threads about this. Unless you are
running with Shared Sysplex Root, you cannot mount the same filesystem on
multiple systems for READ/WRITE. You will know if you are or are not by
BPMPRMxx SYSPLEX (YES|NO) setting. There is quite a bit of pre-work and
planning required to turn on SYSPLEX Filesystem.
/* SYSPLEX ROOT DEFINTIONS */
/* */
VERSION('&SYSR1.')
SYSPLEX(YES)
The alternative I gave you then is to manually UNMOUNT the filesystem from
where ZOSMF was, and MOUNT It on the system you WANT to run ZOSMF on, and you
should be fine.
_____________________________________________________________________________________________________
Dave Jousma
AVP | Manager, Systems Engineering
Fifth Third Bank | 1830 East Paris Ave, SE | MD RSCB2H | Grand Rapids, MI
49546
616.653.8429 | fax: 616.653.2717
-----Original Message-----
From: IBM Mainframe Discussion List <[email protected]> On Behalf Of
Steve Beaver
Sent: Monday, May 4, 2020 1:22 PM
To: [email protected]
Subject: zOSHF / zFS
**CAUTION EXTERNAL EMAIL**
**DO NOT open attachments or click on links from unknown senders or unexpected
emails**
I have come up against and INTERESTING problem. Ona zOS 2.4 system
On my MONOPLEX the zFS for zOSMF showed MOUTED in ISH and when I look at in
SDSF FS it's all good zOSMF operates as it should.
In my 4-way SYSPLEX the JAVA's and the LIBERTY zFS are correct in ISH and in
SDSF FS
Now the ZOSMF zFS shows it was properly mounted in ISH, however in SDSF FS, the
zFS is not visible, and the IZUANG1 fails.
Any ideas
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions, send email to
[email protected] with the message: INFO IBM-MAIN **CAUTION EXTERNAL
EMAIL**
**DO NOT open attachments or click on links from unknown senders or unexpected
emails**
This e-mail transmission contains information that is confidential and may be
privileged. It is intended only for the addressee(s) named above. If you
receive this e-mail in error, please do not read, copy or disseminate it in any
manner. If you are not the intended recipient, any disclosure, copying,
distribution or use of the contents of this information is prohibited. Please
reply to the message immediately by informing the sender that the message was
misdirected. After replying, please erase it from your computer system. Your
assistance in correcting this error is appreciated.
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO IBM-MAIN
